INSTALLATION / OWNER'S MANUAL
3-Hole Escutcheon Plate
Model # LK134
Plumber's Putty
SAVE FOR CONSUMER
WARNING: Please carefully read and properly follow the instructions for installation found in this manual.
STEPS:
2
1
1
2
3
4
Before installation, align the hole in the
gasket (1) and deck plate (2) with the
mounting hole in the sink. Place the
faucet assembly through the deck plate
(2) and mounting hole in the sink until
the faucet assembly sets on top of
deck plate (2).
NOTE: If the sink is uneven, use
silicone under the gasket (1).
Secure the faucet assembly with the
washers (1&2) and nut (3). Hand tighten
the nut (3) onto the faucet assembly.
Lock the nut (3) into position by
tightening the screws (4) with a phillips
screwdriver.