7-3/4"
(197mm)
7/16" (11mm) x
3/4" (19mm)
LONG SLOT
STAINLESS
STEEL BRACKETS
6-3/8"
(162mm)
1-1/2" (38mm) O.D.
33-1/2"
(851mm)
J
I
8-7/8"
(225mm)
3-1/4" (83mm) DIA. FOR LK18B DRAIN
1/4" R
(6mm)
F
F
H
A
C
E
D
B
E
G
K
3-1/2"
(89mm)
9-1/8"
(232mm)
1/4" R (6mm)
5-3/8"
(137mm)
36" (914mm)
SUGGESTED
FLOOR TO
RIM HEIGHT
H
I
J
33-1/2"
(851mm)
13-3/4"
(349mm)
7-3/4"
(197mm)
F
4-1/4"
(108mm)
G
K
H
H
14"
(356mm)
1-1/4" (32mm) DIA.
(3 HOLES)
WALL
HANGER
7/16" (11mm)
DIA. HOLE
Three Station Wall Mounted Wash Sink
®
With Sensor Faucets, AC Powered
Models EWMA7220SACC,
EWMA7220SACMC and EWMA7220SACTMC
SPECIFICATIONS
GENERAL
EWMA7220 #14 gauge, type 304 (18-8) stainless steel three
station wash sink with 1/4" (6mm) radius coved corners. 1-1/2"
(38mm) wide sloping top channel rims, with 2" (51mm) flat
apron. Full length 10" (254mm) high backsplash. Rim corners
are square. Exposed surfaces are hand blended to a uniform
satin luster finish. Furnished with wall hangers and stainless
steel support brackets.
(CHECK MODEL SPECIFIED) MIXING
MODEL FAUCET
EWMA7220SACC LK722AC (3) LK18B
EWMA7220SACMC LK722AC (3) LK18B
EWMA7220SACTMC LK722AC (3) LK18B
DRAIN VALVE
NONE
LK724 (3)
LK723 (3)
Model EWMA7220SACC
LK722AC Sensor-operated, non-mixing (tempered water),
backsplash-mounted gooseneck faucet with adjustable sensor
eyes. A continuous beam is emitted from sensor. The sensor
faucet is activated by user placing hands under the spout.
Tempered water will flow as long as hands remain within sensor range. When hands are removed, the water stops automatically based on shut off delay settings. The sensor then resets
and is ready for the next user. AC powered, chrome plated solid brass body construction and 12-3/4" (324mm) high (bottom of base to top of spout), 8-3/4" (222mm) from aerator to
base, 5-3/8" (137mm) reach C.P. spout with 2.0 gpm laminar
flow control on spout end. Includes vandal-resistant, waterresistant sensor control module with armored vandal-resistant
control and power cables. LK730 wire lead allows contractor to
connect each control box to one LK727 multi-unit power
adapter. Depending on the location of the LK727, 20-22 gauge
wire (not supplied) may be required from LK730 to LK727.
Slow-closing piston operated solenoid valve, in-line filter with
clean out trap, and 3/8" (10mm) copper fittings for supply tube
furnished by contractor. Control circuit is solid state, has
adjustable sensor range (6" [152mm] preset to 30" [762mm]),
shut off delay preset at 1 second and field adjustable to 2, 4 or
8 seconds, and automatic time-out feature (to prevent sink
overflow) is preset at 0 seconds and is field adjustable to 15, 30
or 60 seconds.
LK18B Stainless steel perforated grid strainer with 1-1/2"
(38mm) O.D. stainless steel tailpiece.
LK723 Anti-scald thermostatic mixing valve with nickel-plated
brass body 1/2" (13mm) SWT inlets and outlet connections,
check valves on inlets and a mixed temperature range of
80°- 120°F. Certified under ASSE1016.
LK724 Mechanical mixing valve with C.P. brass body, 3/8"
(10mm) compression inlets and outlet connections, and check
valves on inlets.
DIMENSIONS
Model
Number in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
EWMA7220 72 1829 20 508 69 1753 161/2 419 36 914 11/2 38 10 254 2 51 24 610 12 305 8 203
A B C D E F G H I J K
Elkay Manufacturing Company
www.elkay.com
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2001 Elkay Mfg. Co.
(3/01) 3-45
®
Three Station Wall Mounted Wash Sink
SINK
SINK
4"
(102mm)
10"
(254mm)
4"
(102mm)
4"
(102mm)
10"
(254mm)
10"
(254mm)
10"
(254mm)
24"
(610mm)
24"
(610mm)
WALL HANGER
16-15/16"
(430mm)
5-3/8"
(137mm)
18-1/16"
(459mm)
7/8"
(22mm)
43-13/16"
(1113mm)
(PROVIDES
36" [914mm]
FINISHED FLOOR
TO RIM HEIGHT)
FINISHED FLOOR
NOTE:
ALL FASTENERS
SUPPLIED BY OTHERS
8-5/8"
(219mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
4"
(102mm)
8"
(204mm)
1-1/8"
(28mm)
1-5/8"
(41mm)
3-1/2"
(89mm)
1-5/8"
(41mm)
1/2" (13mm)
IPS SUPPLY INLET
(6 PLACES)
1/4" (6mm) x
1" (25mm)
LONG SLOT
(8 PLACES)
OUTLINE OF SINK
3/16" (5mm) x
5/8" (16mm)
LONG SLOT
(6 PLACES)
7/16" (11mm) x
3/4" (19mm)
LONG SLOT
(2 PLACES)
7/16" (11mm)
DIA. HOLE
(2 PLACES)
1-1/2" (38mm)
IPS WASTE
5-7/16"
(138mm)
23"
(584mm)
2"
(51mm)
FOR EWMA7220SACTMC
FOR EWMA7220SACMC
INPUT: 110-120 VAC
LK727 MULTI-UNIT
POWER ADAPTER;
OUTLET LOCATION
BY OTHERS (POWER
SUPPLY MUST BE
INSTALLED PER
LOCAL CODES) –
1 ADAPTER SUPPLIED PER
SINK – INSTALLER MUST
CONNECT 3 FAUCETS
TO THE 1 ADAPTER
WIRE CONNECTORS
& ADDITIONAL
20-22GA WIRE
(NOT SUPPLIED)
LK730 WIRE LEAD
FROM FAUCETS TO LK727
MULTI-UNIT ADAPTER
NOTE:
USE TEFLON TAPE FOR
ALL WATER CONNECTIONS.
DO NOT USE PIPE DOPE.
10-1/4"
(260mm)
5-3/8"
(137mm)
SINK
BACKSPLASH
MOUNTING
BOLT
MOUNTING
HARDWARE
2-1/2"
(64mm)
30"
(762mm)
MAX
SENSOR
3/8" (10mm) SUPPLY LINE
(NOT SUPPLIED)
SOLENOID VALVE
IN-LINE FILTER
NYLON WASHER
8-3/4"
(222mm)
LK724 – MANUAL
MIXING VALVE
TEMP.
ADJUST
STOP VALVES,
FITTINGS &
3/8" (10mm)
SUPPLY LINES
(NOT SUPPLIED)
COMPRESSION TO SWEAT
ADAPTER 3/8" (10mm) x 1/2" (13mm)
(3-REQ’D) & 1/2" (13mm) SUPPLY
TUBE (NOT SUPPLIED)
90 DEGREE ST. EL.
(2 REQ’D) NOT SUPPLIED
STOP VALVES, FITTINGS
& 3/8" (10mm) SUPPLY LINES
(NOT SUPPLIED)
LK723
THERMOSTATIC
MIXING VALVE
TEMP.
ADJUST
LK726
LAMINAR
FLOW CONTROL
2.0 GPM
CONTROL BOX
With Sensor Faucets, AC Powered
Models EWMA7220SACC,
EWMA7220SACMC and EWMA7220SACTMC
ROUGH-IN DIMENSIONS
Elkay Manufacturing Company
3-45 (3/01)
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2001 Elkay Mfg. Co.
Loading...