Elkay EWMA6020SBMC, EWMA6020SBC, EWMA6020SBTMC User Manual

7-3/4"

(197mm)

7/16" (11mm) x 3/4" (19mm) LONG SLOT

STAINLESS STEEL BRACKETS

6-3/8"

(162mm)

1-1/2" (38mm) O.D.

33-1/2"

(851mm)

8-7/8"

(225mm)

3-1/4" (83mm) DIA. FOR LK18B DRAIN

1/4" R (6mm)

3-1/2"

(89mm)

9-1/8"

(232mm)

1/4" R (6mm)

5-3/8"

(137mm)

36" (914mm)

SUGGESTED

FLOOR TO

RIM HEIGHT

33-1/2"

(851mm)

13-3/4"

(349mm)

7-3/4"

(197mm)

4-1/4"

(108mm)

14"

(356mm)

1-1/4" (32mm) DIA. (3 HOLES)

WALL HANGER

7/16" (11mm) DIA. HOLE

Three Station Wall Mounted Wash Sink

With Sensor Faucets, Battery Powered Models EWMA6020SBC, EWMA6020SBMC and EWMA6020SBTMC

SPECIFICATIONS

GENERAL

EWMA6020 #14 gauge, type 304 (18-8) stainless steel three station wash sink with 1/4" (6mm) radius coved corners. 1-1/2" (38mm) wide sloping top channel rims, with 2" (51mm) flat apron. Full length 10" (254mm) high backsplash. Rim corners are square. Exposed surfaces are hand blended to a uniform satin luster finish. Furnished with wall hangers and stainless steel support brackets.

(CHECK MODEL SPECIFIED) MIXING

MODEL FAUCET

EWMA6020SBC LK722B (3) LK18B EWMA6020SBMC LK722B (3) LK18B EWMA6020SBTMC LK722B (3) LK18B

LK722B Sensor-operated, non-mixing (tempered water), back splash-mounted gooseneck faucet with adjustable sensor eyes. A continuous beam is emitted from sensor. The sensor faucet is activated by user placing hands under the spout. Tempered water will flow as long as hands remain within sensor range. When hands are removed, the water stops automatically based on shut off delay settings. The sensor then resets and is ready for the next user. Battery powered and has a battery holder with (4) AA batteries. Chrome plated - solid brass body construction and 12-3/4" (324mm) high (bottom of base to top of spout), 8-3/4" (222mm) from aerator to base, 5-3/8" (137mm) reach C.P. spout with 2.0 gpm laminar flow control on spout end. Includes vandal-resistant, water-resistant sensor control module with armored vandal-resistant control and power cables. Slow-closing piston operated solenoid valve, inline filter with clean out trap, and 3/8" (10mm) copper fittings for supply tube furnished by contractor. Control circuit is solid

DRAIN VALVE

NONE LK724 (3) LK723 (3)

Model EWMA6020SBC

state, has adjustable sensor range (6" [152mm] preset to 30"

[762mm]), shut off delay preset at 1 second and field adjustable to 2, 4 or 8 seconds, and automatic time-out feature (to prevent sink overflow) is preset at 0 seconds and is field adjustable to 15, 30 or 60 seconds.

LK18B Stainless steel perforated grid strainer with 1-1/2" (38mm) O.D. stainless steel tailpiece.

LK723 Anti-scald thermostatic mixing valve with nickel-plated brass body 1/2" (13mm) SWT inlets and outlet connections, check valves on inlets and a mixed temperature range of 80°- 120°F

. Certified under ASSE1016.

LK724 Mechanical mixing valve with C.P. brass body, 3/8" (10mm) compression inlets and outlet connections, and check valves on inlets.

DIMENSIONS

Model

Number in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm

EWMA6020 60 1524 20 508 57 1448 161/2 419 30 762 11/2 38 10 254 2 51 20 508 10 254 8 203

A B C D E F G H I J K

Elkay Manufacturing Company

www.elkay.com

2222 Camden Court Oak Brook, IL 60523

(3/01) 3-44

Three Station Wall Mounted Wash Sink

SINK

(102mm)

10"

(254mm)

20"

(508mm)

20"

(508mm)

10"

(254mm)

10"

(254mm)

(102mm)

10"

(254mm)

WALL HANGER

16-15/16"

(430mm)

5-3/8"

(137mm)

18-1/16" (459mm)

7/8"

(22mm)

43-13/16" (1113mm)

(PROVIDES

36" [914mm]

FINISHED FLOOR

TO RIM HEIGHT)

FINISHED FLOOR

NOTE: ALL FASTENERS SUPPLIED BY OTHERS.

8-5/8"

(219mm)

(102mm)

(203mm)

1-1/8"

(28mm)

1-5/8"

(41mm)

3-1/2"

(89mm)

1-5/8"

(41mm)

1/2" (13mm)

IPS SUPPLY INLET

(6 PLACES)

1/4" (6mm) x 1" (25mm)

LONG SLOT (7 PLACES)

OUTLINE OF SINK

3/16" (5mm) x 5/8" (16mm)

LONG SLOT (6 PLACES)

7/16" (11mm) x 3/4" (19mm)

LONG SLOT (2 PLACES)

7/16" (11mm) DIA. HOLE

(2 PLACES)

1-1/2" (38mm)

IPS WASTE

5-7/16"

(138mm)

23"

(584mm)

(51mm)

FOR EWMA6020SBTMC

FOR EWMA6020SBMC

10-1/4"

(260mm)

5-3/8"

(137mm)

MOUNTING HARDWARE

CONTROL BOX WITH LK729 BATTERY HOLDER & BATTERIES INSIDE

2-1/2"

(64mm)

30"

(762mm)

MAX

NOTE: USE TEFLON TAPE FOR ALL WATER CONNECTIONS. DO NOT USE PIPE DOPE.

SENSOR

3/8" (10mm)

SUPPLY LINE

(NOT SUPPLIED)

SOLENOID VALVE

IN-LINE FILTER

NYLON WASHER

8-3/4"

(222mm)

SINK BACKSPLASH

MOUNTING BOLT

LK724 – MANUAL MIXING VALVE

TEMP. ADJUST

STOP VALVES, FITTINGS & 3/8" (10mm) SUPPLY LINES (NOT SUPPLIED)

COMPRESSION TO SWEAT ADAPTER 3/8" (10mm) x 1/2" (13mm) (3-REQ’D) & 1/2" (13mm) SUPPLY TUBE (NOT SUPPLIED)

90 DEGREE ST. EL. (2 REQ’D) NOT SUPPLIED

STOP VALVES, FITTINGS & 3/8" (10mm) SUPPLY LINES (NOT SUPPLIED)

LK723

THERMOSTATIC MIXING VALVE

TEMP. ADJUST

LK726

LAMINAR FLOW CONTROL

2.0 GPM

With Sensor Faucets, Battery Powered Models EWMA6020SBC, EWMA6020SBMC and EWMA6020SBTMC

ROUGH-IN DIMENSIONS

Elkay Manufacturing Company

3-44 (3/01)

2222 Camden Court Oak Brook, IL 60523