Elkay ESS4924RSBC User Manual
Service Sink, Wall Mounted
®
28-1/2"
(724mm)
3"
(76mm)
15"
(381mm)
1-1/2"
(38mm)
1" (25mm)
1"
(25mm)
36"
(914mm)
TO
FLOOR
10"
(254mm)
12"
(304mm)
H
I
3-1/2"
(89mm)
7/16" (11mm)
DIA. HOLE
7/16" (11mm) x
3/4" (19mm) SLOT
14 GAUGE
STAINLESS STEEL
BRACKETS
1/4" R
(6mm)
1/2" (12mm)
TURNDOWN
1-1/4" (32mm) DIA.
1 HOLE
A
3-1/2" (89mm)
DIA. HOLE
2"
(50mm)
D
1-1/2"
(38mm)
ROLLED
RIM
1-1/2"
(38mm)
ROLLED
RIM
B
C G
E
1/4" R
(6mm)
F
FLOOR LINE
With Drainboard and Sensor Faucet
Battery Powered, Models ESS4924RSBC,
ESS4924RSBMC and ESS4924RSBTMC
SPECIFICATIONS
GENERAL
ESS4924R #14 gauge, type 304 (18-8) stainless steel service
sink with right hand 30" (762mm) drainboard. 1/4" (6mm) radius
vertical and horizontal coved corners. 1-1/2" (38mm) rolled rim.
Full length backsplash with 45° sloped top. Exposed surfaces
are hand blended to a uniform satin luster finish. Furnished with
wall hanger and stainless steel support brackets. Carries NSF
International Certification.
(CHECK MODEL SPECIFIED)
MODEL FAUCET
DRAIN VALVE
MIXING
ESS4924RSBC LK722B LK18B NONE
ESS4924RSBMC LK722B LK18B LK724
ESS4924RSBTMC LK722B LK18B LK723
LK722B Sensor-operated, non-mixing (tempered water), back-
Model ESS4924RSBC
splash-mounted gooseneck faucet with adjustable sensor
eyes. A continuous beam is emitted from sensor. The sensor
faucet is activated by user placing hands under the spout.
Tempered water will flow as long as hands remain within sensor range. When hands are removed, the water stops automatically based on shut off delay settings. The sensor then resets
and is ready for the next user. Battery powered and has a battery holder with (4) AA batteries. Chrome plated - solid brass
body construction and 12-3/4" (324mm) high (bottom of base
to top of spout), 8-3/4" (222mm) from aerator to base, 5-3/8"
(137mm) reach C.P. spout with 2.0 gpm laminar flow control on
spout end. Includes vandal-resistant, water-resistant sensor
control module with armored vandal-resistant control and
power cables. Slow-closing piston operated solenoid valve, inline filter with clean out trap, and 3/8" (10mm) copper fittings
for supply tube furnished by contractor. Control circuit is solid
state, has adjustable sensor range (6" [152mm] preset to 30"
[762mm]), shut off delay preset at 1 second and field adjustable
to 2, 4 or 8 seconds, and automatic time-out feature (to prevent
sink overflow) is preset at 0 seconds and is field adjustable to
15, 30 or 60 seconds.
LK18B Stainless steel perforated grid strainer with 1-1/2"
(38mm) O.D. stainless steel tailpiece.
LK723 Anti-scald thermostatic mixing valve with nickel-plated
brass body 1/2" (13mm) SWT inlets and outlet connections,
check valves on inlets and a mixed temperature range of
80°- 120°F
. Certified under ASSE1016.
LK724 Mechanical mixing valve with C.P. brass body, 3/8"
(10mm) compression inlets and outlet connections, and check
valves on inlets.
DIMENSIONS
Model
Number in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
ESS4924R 491/2 1257 24 610 18 457 201/2 521 101/2 267 121/4 311 30 762 8 203 10 254
A B C D E F G H I
Elkay Manufacturing Company
www.elkay.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2001 Elkay Mfg. Co.
(3/01) 3-40
®
Service Sink, Wall Mounted
8"
(203mm)
6-1/2"
(165mm)
1/2" (13mm) IPS SUPPLY INLET
(2 PLACES)
SINK
SINK
1/8" (3mm)
2"
(51mm)
2-1/2"
(63mm)
FINISHED FLOOR
1-1/2" (38mm)
IPS WASTE
NOTE:
ALL FASTENERS
SUPPLIED BY OTHERS
7-1/2"
(191mm)
3/4"
(19mm)
4"
(102mm)
4"
(102mm)
9-1/4"
(235mm)
10"
(254mm)
10"
(254mm)
7-1/2"
(191mm)
1/4" (6mm) x 1" (25mm)
LONG SLOT (6 PLACES)
OUTLINE OF SINK
3/16" (5mm) x 5/8" (16mm)
LONG SLOT (2 PLACES)
7/16" (11mm) x 3/4" (19mm)
LONG SLOT (3 PLACES)
7/16" (11mm) DIA. HOLE
(3 PLACES)
5-7/16"
(138mm)
16"
(406mm)
10"
(254mm)
25"
(635mm)
21"
(533mm)
7/8"
(22mm)
8-5/16"
(211mm)
10"
(254mm)
41-13/16" (1062mm)
(PROVIDES 36" [914mm]
FINISHED FLOOR
TO RIM HEIGHT)
WALL HANGER
FOR ESS4924RSBTMC
FOR ESS4924RSBMC
10-1/4"
(260mm)
5-3/8"
(137mm)
MOUNTING
HARDWARE
CONTROL BOX
WITH LK729
BATTERY HOLDER
& BATTERIES INSIDE
2-1/2"
(64mm)
30"
(762mm)
MAX
NOTE:
USE TEFLON TAPE FOR
ALL WATER CONNECTIONS.
DO NOT USE PIPE DOPE.
SENSOR
3/8" (10mm)
SUPPLY LINE
(NOT SUPPLIED)
SOLENOID VALVE
IN-LINE FILTER
NYLON WASHER
8-3/4"
(222mm)
SINK
BACKSPLASH
MOUNTING
BOLT
LK724 – MANUAL
MIXING VALVE
TEMP.
ADJUST
STOP VALVES,
FITTINGS &
3/8" (10mm)
SUPPLY LINES
(NOT SUPPLIED)
COMPRESSION TO SWEAT
ADAPTER 3/8" (10mm) x 1/2" (13mm)
(3-REQ’D) & 1/2" (13mm) SUPPLY
TUBE (NOT SUPPLIED)
90 DEGREE ST. EL.
(2 REQ’D) NOT SUPPLIED
STOP VALVES, FITTINGS
& 3/8" (10mm) SUPPLY LINES
(NOT SUPPLIED)
LK723
THERMOSTATIC
MIXING VALVE
TEMP.
ADJUST
LK726
LAMINAR
FLOW CONTROL
2.0 GPM
With Drainboard and Sensor Faucet
Battery Powered, Models ESS4924RSBC,
ESS4924RSBMC and ESS4924RSBTMC
ROUGH-IN DIMENSIONS
Elkay Manufacturing Company
3-40 (3/01)
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2001 Elkay Mfg. Co.
Loading...