Service Sink, Wall Mounted
With Drainboard and Sensor Faucet
AC / Battery, Models ESS4924RSACC,
ESS4924RSACMC and ESS4924RSACTMC ®
SPECIFICATIONS
GENERAL
ESS4924R #14 gauge, type 304 (18-8) stainless steel service
sink with right hand 30" (762mm) drainboard. 1/4" (6mm) radius
vertical and horizontal coved cor ners. 1-1/2" (38mm) rolled rim.
Full length backsplash with 45° sloped top. Exposed surfaces
are hand blended to a uniform satin luster finish. Furnished with
wall hanger and stainless steel support brackets. Carries NSF
International Certification.
(CHECK MODEL SPECIFIED)
MIXING
MODEL FAUCET DRAIN VALVE
ESS4924RSACC LKB722C LK18B NONE
ESS4924RSACMC LKB722C LK18B LK724
ESS4924RSACTMC LKB722C LK18B LK723
LKB722C Sensor-operated, non-mixing (tempered water),
Model ESS4924RSACC
backsplash-mounted gooseneck faucet with adjustable sensor
eyes. A continuous beam is emitted from sensor. The sensor
faucet is activated by user placing hands under the spout.
Tempered water will flow as long as hands remain within sensor range. When hands are removed, the water stops automatically based on shut off delay settings. The sensor then resets
and is ready for the next user. Chrome-plated solid brass body
construction with 2.0gpm laminar flow control on spout end.
Includes water-resistant sensor control module and power cables.
Features dual power options: AC plug-in and battery holder with
four AA batteries. Slow-closing piston operated solenoid valve,
in-line filter with clean-out trap and flexible supply hose.
Control circuit is solid state, has adjustable sensor range of 7/8"
(22mm) to 6-3/4" (171mm), shut-off delay preset to 1 second and
field adjustable to 2 seconds (to prevent sink overflow).
LK18B Stainless steel perforated grid strainer with 1-1/2"
(38mm) O.D. stainless steel tailpiece.
LK723 Anti-scald thermostatic mixing valve with nickel-plated
brass body 1/2" (13mm) SWT inlets and outlet connections,
check valves on inlets and a mixed temperature range of
80°- 120°F. Certified under ASSE1016.
LK724 Mechanical mixing valve with C.P. brass body, 3/8"
(10mm) compression inlets and outlet connections, and check
valves on inlets.
DIMENSIONS
Model
Number in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
ESS4924 R 49
A B C D E F G H I
1
/
2 1257 24 610 18 457 20
1
/
2 521 10
1
/
2 267 12
1
/
4 311 30 762 8 203 10 254
2"
(51mm)
B
D
(38mm)
RIM
Elkay
www.elkay.com
A
3-1/2" (89mm)
DIA. HOLE
E
1/4" R
(6mm)
C G
3-1/2"
(89mm)
36"
TO
FLOOR
(304mm)
H
10"
1/4" R
(6mm)
(381mm)
15"
FLOOR LINE
I
(25mm)
12"
(254mm)
1" (25mm)
1-1/2"
(38mm)
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
F
(914mm)
(38mm)
RIM
2222 Camden Court
Oak Brook, IL 60523
1 HOLE
ST
BRACKETS
28-1/2"
(724mm)
1/2" (12mm)
TURNDOWN
7/16" (11mm) x
3/4" (19mm) SLOT
7/16" (11mm)
DIA. HOLE
3"
(76mm)
Printed in U.S.A.
©2010 Elkay
(Rev. 4/10) 3-39B
Service Sink, Wall Mounted
With Drainboard and Sensor Faucet
AC / Battery, Models ESS4924RSACC,
ESS4924RSACMC and ESS4924RSACTMC
ROUGH-IN DIMENSIONS
LONG SLOT (6 PLACES)
OUTLINE OF SINK
7/16" (11mm) x 3/4" (19mm)
LONG SLOT (3 PLACES)
7/16" (11mm) DIA. HOLE
3/16" (5mm) DIA. HOLE
1/2" (13mm) IPS SUPPLY INLET
NOTE:
ALL F ASTENERS
SUPPLIED BY OTHERS
(3 PLACES)
(3 PLACES)
(2 PLACES)
(102mm)
6-1/2"
(165mm)
7-1/2"
(191mm)
(19mm)
4"
1-5/8"
(41mm)
(203mm)
SINK
7-1/2"
(191mm)
9-1/4"
(235mm)
2"
(51mm)
1-31/32"
(50mm)
8"
1/8" (3mm)
SINK
(254mm)
21"
(533mm)
10"
IPS W ASTE
3-15/16"
(100mm)
13-7/16"
(341mm)
10"
(254mm)
10"
(254mm)
25"
(635mm)
4"
(102mm)
WALL HANGER
8-5/16"
(211mm)
10"
(254mm)
41-13/16" (1062mm)
(PROVIDES 36" [914mm]
FINISHED FLOOR
TO RIM HEIGHT)
7/8"
(22mm)
FINISHED FLOOR
FOR ESS4924RSACMC
STOP VALVES,
FITTINGS &
3/8" (10mm)
SUPPLY LINES
(NOT SUPPLIED)
FOR ESS4924RSACTMC
LK723
THERMOSTATIC
MIXING VALVE
Elkay
3-39B (Rev. 4/10)
TEMP .
ADJUST
LK724 – MANUAL
MIXING VALVE
TEMP .
ADJUST
COMPRESSION TO SWEAT
ADAPTER 3/8" (10mm) x 1/2" (13mm)
(3-REQ’D) & 1/2" (13mm) SUPPLY
TUBE (NOT SUPPLIED)
90 DEGREE ST. EL.
(2 REQ’D) NOT SUPPLIED
STOP VALVES, FITTINGS
& 3/8" (10mm) SUPPLY LINES
(NOT SUPPLIED)
.313
8 mm
NOTE:
USE TEFLON TAPE FOR
ALL WATER CONNECTIONS.
DO NOT USE PIPE DOPE.
2222 Camden Court
Oak Brook, IL 60523
10.87 ±.13
276 mm ±
3
25.50 ±.25
648 mm ±6
6.63 ±.13
168 mm ±3
7.50 ±.13
190 mm ±3
Printed in U.S.A.
©2010 Elkay