Elkay EDFPB114C Specifications

S P E C I F I C AT I O N S

GENERAL

Wall mounted drinking fountain basin constructed of #18 gauge,
300 series stainless steel polished to a lust rous satin
finish with high shined outer edge. #16 gauge, type 304
tubular stainless steel support arm incorporates a recess to be
integrated with basin.

Contoured basin minimizes splashing and has exclusive Flexi-

®

Guard
Keyed in location to prevent rotation. Fully functional, vandal­resistant front push button is easy to operate. Flow regulator
provides constant stream from 20 to 105 psi water pressure.

THIS WATER COOLER COM PLIES WITH THE REQUIRE­MENTS OF A.D.A. (AMERICANS WITH DISABILITIES ACT).

NO LEAD DESIGN

THIS DRINKING FOUNTAIN COMPLIES WITH THE LEAD­FREE DEFINITION IN THE SAFE DRINKING WATER ACT OF
1986 AND LEAD CONTAM INATI

Elkay Drinking Fountains are manufactured with a waterway
system utilizing copper components and completely lead-free
material. These waterways have no lead because all leaded
materials, such as leaded brass, have been removed.

This fountain is certified by WQA to lead-free compliance including

NSF/ANSI 61 and 372.

safety bubbler to prevent accidental mouth injuries.

ON CONTROL ACT OF 1988.

No Lead SwirlFlo®Drinking Fountain

Fully Exposed Wall Mount

Barrier-Free Access

Model EDFPB114C

Model EDFPB114C

CONSTRUCTION

EDFPB114C furnished complete with Flexi-Guard
assembled front push button, flow regulator (20 to 105 psi). No
trap furnished.

ACCESSORIES

MPW101 In-wall mounting plate carrier accessory.
ML100 Optional in-wall support legs for use with MPW101.

®

, fully

DIA.

(41mm)

(863mm)

REQUIREMENT

ALSO AVAILABLE

EDFPBV114C includes a one-piece construction, heavy-duty,
vandal-resistant bubbler.

(467mm)

In keeping with our polic y of continuing pro duct imp rovement, Elkay reserves the right to change
produc t specifications w ithout notic e.

Elkay

elkaypro.com

2222 Camden Court
Oak Brook, IL 60523

FINISHED FLOOR

WEIV EDISWEIV TNORF

This specification describes an Elkay prod uct w ith design, quality and functional b enefits to the
user. When making a com parison of other pro ducers’ off erings, be certain thes
overlooked.

Printed in U.S.A.
©2014 Elkay

(Rev. 1/14) 14-43D

e features are not

1-1/4" I.P.S. WASTE

(LEFT OR RIGHT).

WASTE IS SHOWN

IN WALL, BUT MAY

BE BEHIND WALL.

3/8" I.P.S. SUPPLY

(LEFT OR RIGHT)

COM-
TION OF QUICK CONNECT FITTINGS

USHING TUBE IN BEFORE

PULLING IT OUT HELPS TO

VICE STOP

(NOT FURNISHED)

3/8" O.D. TUBE CONNECT

WASTE ELBOW,

EXTENSION AND

TRAP BY OTHERS
PANEL AND FRAMING

NOTCH STUDS 1/8" (3mm) DEEP

MOUNTING PLATE MUST BE

FLUSH WITH STUDS WHEN

FINISHED WALL MATERIAL

MUST BE NOTCHED

TO ACCOMMODATE LAG

WASTE 1-1/4" I.P.S.

LEFT OR RIGHT SIDE.

WASTE IS SHOWN

IN WALL BUT MAY

BE BEHIND WALL.

SUPPLY 3/8" I.P.S.

LEFT OR RIGHT SIDE

FINISHED FLOOR LINE

NOTE

WALL PLATE MUST BE SUPPORTED SECURELY.

ADD FIXTURE SUPPORT CARRIER IF WALL

WILL NOT PROVIDE ADEQUATE SUPPORT.

NOTCH STUDS 1/8" (3mm) DEEP

FRONT VIEW

SIDE VIEW

No Lead SwirlFlo®Drinking Fountain
Fully Exposed Wall Mount
Barrier-Free Access
Model EDFPB114C

FRONT VIEW

SIDE VIEW

(419mm)
16-1/2"
(362mm)
(546mm)
14-1/4"

(203mm)
21-1/2"
8"
(102mm)
(645mm)

(730mm)

4"
25-3/8"

28-3/4"
(203mm)
(743mm)
8"
29-1/4"

BY OTHERS
(OR EQUIVALENT)
LAG SCREW
5/16" (8mm)
(127mm)

BOLT HEADS

(152mm)
5"

6"
(3mm)
(13mm)
1/8"
1/2"
INSTALLED

LEFT OR RIGHT SIDE

(19mm)
SUPPLY 3/8" I.P.S.

BE BEHIND WALL.

3-4"
IN WALL BUT MAY
(203mm)
WASTE IS SHOWN
8"
LEFT OR RIGHT SIDE.
(406mm)

WASTE 1-1/4" I.P.S.
16"

SUPPORT PREPARATION

FINISHED FLOOR
OR FROM REAR ACCESS
FRONT ACCESS PANEL
MADE THRU OPTIONAL
INSTALLATION CAN BE

(349mm)

NOTE

13-3/4"

REQUIREMENT
ADA

(OPTIONAL)
BY OTHERS

(686mm)

ACCESS PANEL
(419mm)

SHUT OFF

27"

AP99
16-1/2"

RECOMMENDED
(546mm)
(863mm)

21-1/2"

SUPPLY
NOT SHOWN

33-15/16"
(229mm)
(730mm)
9" SQ
28-3/4"

OPTIONAL ACCESS
WASTE
(41mm)

(467mm)
1-5/8"

18-3/8"
DIRECTION

UNPLATED COPPER TUBE.

RELEASE TUBE
SER
NOTE: WATERFLOW
NISHED) TO ACCEPT 3/8" O.D.
P
SHUT OFF VALVE (NOT FUR-
AB

C
PLETELY LEAD-FREE MATERIAL.
ARE MANUFACTURED OF
CONNECTING FITTINGS WHICH
AND VALVE INCLUDING ALL
TUBE TO ATTACH

IN POSITION

TO RELEASE TUBE
FURNISHED WITH A BUBBLER

SIMPLY PUSH IN

TUBE IS SECURED

PUSH IN COLLET
TO COOLER

INLET
THIS DRINKING FOUNTAIN IS

COLD WATER SUPPLY

WATER INLET

BUILDING WATER

INSTALLER NOTE

OPERA

1/4" O.D. TUBE

INSTALLER NOTE

THIS DRINKING FOUNTAIN IS
FURNISHED WITH A BUBBLER
AND VALVE INCLUDING ALL
CONNECTING FITTINGS WHICH
ARE MANUFACTURED OF COM­PLETELY LEAD-FREE MATERIAL.
SHUT OFF VALVE (NOT FUR­NISHED) TO ACCEPT 3/ 8" O.D.
UNPLATED COPPER TUBE.

OPERATION OF QUICK CONNECT FITTINGS

SIMPLY PUSH IN

TUBE TO ATTACH

A B

TUBE IS SECURED

IN POSITION

R O U G H - I N D I M E N S I O N S

PUSH IN COLLET

TO RELEASE TUBE

C

PUSHING TUBE IN BEFORE
PULLING IT OUT HELPS TO

RELEASE TUBE

1/4" O.D. TUBE
WATER INLET
TO COOLER

3/8" O.D. TUBE CONNECT
COLD WATER SUPPLY

NOTE: WATERFLOW

DIRECTION

BUILDING WATER

INLET

SERVICE STOP
(NOT FURNISHED)

9" SQ

(229mm)

RECOMMENDED
SHUT OFF
BY OTHERS

NOTE

INSTALLATION CAN BE
MADE THRU OPTIONAL
FRONT ACCESS PANEL
OR FROM REAR ACCESS

ACCESS PANEL

(OPTIONAL)

13-3/4"

(349mm)

AP99

SUPPORT PREPARATION

WASTE 1-1/4" I.P.S.
LEFT OR RIGHT SIDE.
WASTE IS SHOWN
IN WALL BUT MAY
BE BEHIND WALL.

6"

(152mm)

25-3/8"

(645mm)

(127mm)

8"

(203mm)

14-1/4"

(362mm)

5"

(102mm)

(13mm)

4"

(203mm)

1/2"

WASTE

SUPPLY

16"

(406mm)

8"

8"

(203mm)

3-4"

(19mm)

1-5/8"

(41mm)

33-15/16"

(863mm)

OPTIONAL ACCESS
PANEL AND FRAMING
NOT SHOWN

27"

(686mm)

ADA

REQUIREMENT

18-3/8"

(467mm)

FINISHED FLOOR

NOTE

WALL PLATE MUST BE SUPPORTED SECURELY.
ADD FIXTURE SUPPORT CARRIER IF WALL
WILL NOT PROVIDE ADEQUATE SUPPORT.

SUPPLY 3/8" I.P.S.
LEFT OR RIGHT SIDE

29-1/4"

(743mm)

28-3/4"

(730mm)

5/16" (8mm)
LAG SCREW
(OR EQUIVALENT)
BY OTHERS

1/8"

(3mm)

1-1/4" I.P.S. WASTE
(LEFT OR RIGHT).
WASTE IS SHOWN
IN WALL, BUT MAY
BE BEHIND WALL.

3/8" I.P.S. SUPPLY
(LEFT OR RIGHT)

28-3/4"

(730mm)

21-1/2"

(546mm)

16-1/2"

(419mm)

MOUNTING PLATE MUST BE
FLUSH WITH STUDS WHEN
INSTALLED

FINISHED WALL MATERIAL
MUST BE NOTCHED
TO ACCOMMODATE LAG
BOLT HEADS

21-1/2"

(546mm)

16-1/2"

(419mm)

WASTE ELBOW,
EXTENSION AND
TRAP BY OTHERS

WASTE 1-1/4" I.P.S.
LEFT OR RIGHT SIDE.
WASTE IS SHOWN
IN WALL BUT MAY
BE BEHIND WALL.

SUPPLY 3/8" I.P.S.
LEFT OR RIGHT SIDE

FINISHED FLOOR LINE

Elkay

14-43D (Rev. 1/14)

2222 Camden Court
Oak Brook, IL 60523

elkaypro.com

Printed in U.S.A.
©2014 Elkay