![](/html/02/028a/028a1366565d1a99aadc269bc7a74a1b6c74b20358bb88f409eb91b07c2cad87/bg1.png)
37-3/4"
(959 mm)
1-5/8"
(42 mm)
18-1/16"
(459 mm)
7-7/8"
(200 mm)
6-3/4"
(171 mm)
27"
(686 mm)
ADA REQUIREMENT
FINISHED FLOOR LINE
2-15/16"
(74 mm)
37-3/4"
(959 mm)
1-5/8"
(42 mm)
18-1/16"
(459 mm)
7-7/8"
(200 mm)
6-3/4"
(171 mm)
27"
(686 mm)
ADA REQUIREMENT
FINISHED FLOOR LINE
2-15/16"
(74 mm)
Wall Mount – Fully Exposed Barrier-Free Access
S P E C I F I C AT I O N S
ENERAL
G
With a contemporary look and smooth, rounded lines, this wall
mounted drinking fountain is constructed of a premium composite, polyester material. Available in White Granite.
Contoured basin minimizes splashing and has exclusive
Charcoal Gray colored Flexi-Guard
accidental mouth injuries. Easy to operate, fully functional,
chrome plated push buttons are vandal-resistant. Bottom
cover plate included. Flow regulator provides stream from 20 to
105 psi water pressure.
HIS DRINKING FOUNTAIN COMPLIES WITH THE
T
EQUIREMENTS OF A.D.A. (AMERICANS WITH DISABILI-
R
IES ACT) WHEN PROPERLY INSTALLED.
T
NO LEAD DESIGN
THIS DRINKING FOUNTAIN COMPLIES WITH THE LEADFREE DEFINITION IN THE SAFE DRINKING WATER ACT OF
1986 AND LEAD CONTAMINATION CONTROL ACT OF 1988.
Elkay Drinking Fountains are manufactured with a waterway
system utilizing copper components and completely lead-free
material. These waterways have no lead because all leaded
materials, such as leaded brass, have been removed.
CONSTRUCTION
EDFP220RC furnished complete with Flexi-Guard
fully assembled front push buttons, flow regulator (20 to 105
p.s.i.), and drain and trap assembly. Bottom cover plate fastened
with vandal-resistant screws.
®
safety bubblers to prevent
®
bubblers,
No Lead Dual Station Drinking Fountain
Model EDFP220RC (White Granite)
Model EDFP220RC
Care and Maintenance of Elkay Composite Fountains
The premium composite fountain provides an extremely durable, nonporous surface which resists staining. Care is very simple. Routine
cleaning with a soft sponge or cloth, or with water or non-abrasive
aerosol foam cleaner, is all that is normally needed to give many years
of trouble free service. Cleaners left standing on the fountain surface
can dull the surface finish. Be certain to rinse all cleaning agents completely and polish with a soft cloth.
Harsh abrasive cleaners are not required and should not be used.
Mild abrasives such as liquid automotive cleaning compound or
baking soda paste will remove simple scratches and stains. Cigarette
burns can normally be removed without noticeable effect. Deeper
scratches or gouges can be corrected with fine grit sandpaper (240
grit then 400 grit) or a green scotchbrite pad.
To maintain or regain luster and make cleaning easier, periodic
appli cations of automobile wax or like products will keep the finish
looking like new.
STANDARDS
This fountain is certified by WQA to lead-free compliance
including NSF/ANSI 61-ANNEX G, AB 1953.
ACCESSORIES
MPW201 In-wall carrier mounting plate.
ML100 Support columns for MPW201.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
Elkay
elkayusa.com
2222 Camden Court
Oak Brook, IL 60523
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Printed in U.S.A.
©2011 Elkay
(Rev. 5/11) 14-33C
![](/html/02/028a/028a1366565d1a99aadc269bc7a74a1b6c74b20358bb88f409eb91b07c2cad87/bg2.png)
INSTALLER NOTE
THIS DRINKING FOUNTAIN IS FURNISHED WITH A BUBBLER
AND VALVE INCLUDING ALL CONNECTING FITTINGS WHICH
ARE MANUFACTURED OF COMPLETELY LEAD FREE MATERIAL.
SHUT-OFF VALVE (NOT FURNISHED) TO ACCEPT 3/8" O.D.
UNPLATED COPPER TUBE.
OPERATION OF QUICK CONNECT FITTINGS
SIMPLY PUSH IN
TUBE TO ATTACH
TUBE IS SECURED
IN POSITION
PUSH IN COLLET
TO RELEASE TUBE
P
USHING TUBE IN BEFORE
P
ULLING IT OUT HELPS TO
R
ELEASE TUBE
A
B
C
NOTE: WATERFLOW
DIRECTION
SERVICE STOP
(NOT FURNISHED)
3
/8" O.D. TUBE CONNECT
C
OLD WATER SUPPLY
1
/4" O.D. TUBE
W
ATER INLET
T
O COOLER
B
UILDING WATER
I
NLET
INSTALLER NOTE
THIS DRINKING FOUNTAIN IS FURNISHED WITH A BUBBLER
AND VALVE INCLUDING ALL CONNECTING FITTINGS WHICH
ARE MANUFACTURED OF COMPLETELY LEAD FREE MATERIAL.
SHUT-OFF VALVE (NOT FURNISHED) TO ACCEPT 3/8" O.D.
UNPLATED COPPER TUBE.
OPERATION OF QUICK CONNECT FITTINGS
SIMPLY PUSH IN
TUBE TO ATTACH
TUBE IS SECURED
IN POSITION
PUSH IN COLLET
TO RELEASE TUBE
P
USHING TUBE IN BEFORE
P
ULLING IT OUT HELPS TO
R
ELEASE TUBE
A
B
C
NOTE: WATERFLOW
DIRECTION
SERVICE STOP
(NOT FURNISHED)
3
/8" O.D. TUBE CONNECT
C
OLD WATER SUPPLY
1
/4" O.D. TUBE
W
ATER INLET
T
O COOLER
B
UILDING WATER
I
NLET
16"
406mm
28-1/4"
718mm
30-7/8"
784mm
32-1/4"
819mm
32-5/8"
829mm
32-7/8"
835mm
WALL SCREW HOLE
LOCATION FOR
SECURING FOUNTAIN
TO WALL
16"
406mm
3"
76mm
8"
203mm8"203mm
1-1/2"
38mm
3/8" I.P.S.
WATER
SUPPLY
1-1/4" I.P.S. WASTE
FINISHED FLOOR
DETAIL 1
WASHER REQUIRED TO
MINIMIZE BREAKAGE OF
FOUNTAIN (TYPICAL ALL
7 MOUNTING BOLTS)
SEE
DETAIL I
16"
406mm
28-1/4"
718mm
30-7/8"
784mm
32-1/4"
819mm
32-5/8"
829mm
32-7/8"
835mm
WALL SCREW HOLE
LOCATION FOR
SECURING FOUNTAIN
TO WALL
16"
406mm
3"
76mm
8"
203mm
8"
203mm
1-1/2"
38mm
3/8" I.P.S.
WATER
SUPPLY
1-1/4" I.P.S. WASTE
FINISHED FLOOR
DETAIL 1
WASHER REQUIRED TO
MINIMIZE BREAKAGE OF
FOUNTAIN (TYPICAL ALL
7 MOUNTING BOLTS)
SEE
DETAIL I
No Lead Dual Station Drinking Fountain
Wall Mount – Fully Exposed Barrier-Free Access
Model EDFP220RC (White Granite)
ROUGH-IN DIMENSIONS
Elkay
14-33C (Rev. 5/11)
2222 Camden Court
Oak Brook, IL 60523
elkayusa.com
Printed in U.S.A.
©2011 Elkay