Elkay EDFP19C-B Installation Manual
EDFP19C*B
Installation/Care/Use Manual
Semi-Recessed Wall Mount Fountain with FLEXI-GUARD
1
SEE FIG. 3
SEE FIG. 4
®
Installer
T o assure you install this model easily and correctly , PLEASE READ THESE SIMPLE
INSTRUCTIONS BEFORE ST ARTING THE INST ALLATION. CHECK YOUR INSTALLATION FOR COMPLIANCE WITH PLUMBING, ELECTRICAL AND OTHER APPLICABLE
CODES. After installation, leave these instructions inside the fountain for future reference.
IMPORTANT
ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON
IMPORTANT! INSTALLER PLEASE NOTE.
THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO
WA TER LINES IS A COMMON PROCEDURE. THIS GROUNDING MA Y BE IN THE BUILDING OR MA Y
OCCUR A WA Y FROM THE BUILDING . THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACK
INTO A FOUNT AIN, CREA TING AN ELECTROLYSIS WHICH CAUSES A METALLIC T ASTE OR AN
INCREASE IN THE METAL CONTENT OF THE WATER. THIS CONDITION IS A VOIDABLE BY USING
THE PROPER MA TERIALS AS INDICA TED. ANY DRAIN FITTINGS PROVIDED BY THE INST ALLER
SHOULD BE MADE OF PLASTIC TO ELECTRICALL Y ISOLA TE THE FOUNT AIN FROM THE BUILDING
PLUMBING SYSTEM.
1/4" O.D. TUBE
WATER INLET
TO COOLER
FIG. 1 FIG. 2
3/8" O.D. UNPLATED
COPPER TUBE CONNECT
COLD WA TER SUPPLY
NOTE: WA TER FLOW
DIRECTION
BUILDING WA TER INLET
SERVICE STOP
(NOT FURNISHED)
98655C (Rev. A - 1/11)
LEGEND:
A = RECOMMENDED W A TER SUPPL Y LOCA TION,
3/8 O.D. UNPLA TED COPPER TUBE CONNECT.
B = RECOMMENDED LOCA TION FOR
WASTE OUTLET, 1-1/4” O.D. DRAIN.
C = 1-1/4” TRAP NOT FURNISHED.
D = MOUNTING HOLES FOR BASIN
HANGER STRAP.
E = MOUNTING HOLES FOR FOUNT AIN
(V ANDAL RESISTANT INSTALLA TION ONLY).
EDFP19C*B
F = MOUNTING HOLES FOR FOUNT AIN
(EASY ACCESS INSTALLATION ONLY).
FINISHED FLOOR
98655C (Rev. A - 1/11)
PAGE 2
Loading...