Elkay EDFAC11PBC User Manual
S P E C I F I C AT I O N S
GENERAL
18 gauge (1.2mm), type 304, nickel bearing stainless steel wall
drinking fountain and cuspidor, designed to meet all sanitary
codes. Unit has embossed bubbler pad and built-in stream
splitter on drinking fountain side. Finish is hand blended to a
lustrous satin finish.
Fountain/ Cuspidor Combination
Fully Recessed Wall Mount
Model EDFBC212C
EDFBC212C: Fount ain/cuspidor comb ination furnished
complete with Flexi-Guard
®
safety bubbler, fully assembled
front push bar, flow regulator provides constant stream from
20 to 105 psi water pressure and domed strainer. No traps
furnished.
NO LEAD DESIGN
THIS DRINKING FOUNTAIN COM PLIES WITH THE LEADFREE DEFINITION IN THE SAFE DRINKING WATER ACT OF
1986 AND LEAD CONTAMINATION CONTROL ACT OF 1988.
CONSTRUCTION
Exclusive Flexi-Guard
®
Safety Bubbler: Innovative design
utilizes a pliable polyester elastomer to prevent accidental
mouth injuries. Flexes on impact, then returns to original position. Strong. Abrasion-resistant. Anti-sweat. Keyed in location
to prevent rotation.
ALSO AVAILABLE
Model EDFBC12PBC: Cuspidor only with pushbar control.
Does not include fountain.
ACCESSORIES
MB24 Mounting Box is available as an optional accessory. For
the fountain/cuspidor combination model EDFBC212C, two
mounting boxes are required.
STANDARDS
This fountain is certified by WQA to lead-free compliance
including NSF/ANSI 61 and 372.
Model EDFBC212C
In keeping with our polic y of continuing p roduct improvement, Elkay reserves the right to change
produc t specific ations without notice. Please visit elkayusa.com for most current spec sheet.
Elkay
elkayusa.com
2222 Camden Court
Oak Brook, IL 60523
This specification describes an Elkay p roduct wit h design, quality and functional benefits t o the
user. When making a comparison of other produc ers’ offerings, b e certai
overlooked.
Printed in U.S.A.
©2012 Elkay
(Rev. 8/12) 14-17J
n these features are not
Fountain/ Cuspidor Combination
TION OF QUICK CONNECT FITTINGS
PUSHING TUBE IN BEFORE
ULLING IT OUT HELPS TO
VICE STOP
NOT FURNISHED)
3/8" O.D. TUBE CONNECT
RELEASE TUBE
11-3/4"
(298mm)
WALL
OPENING
19"
(483mm)
16-1/2"
(419mm)
WALL OPENING
19"
(483mm)
17"
(432mm)
WALL OPENING
2" (51mm)
MINIMUM
18" (457mm)
MAXIMUM
BETWEEN
WALL OPENINGS
10-11/16"
(272mm)
WALL
OPENING
1/2"
(13mm)
LEGEND FOR LEFT FOUNT
T
ASTE OUTLET LOCA
W TION.
ALL HANGER - 12" (305mm) x 1" (25mm) FURNISHED LOOSE.
W
2" (51mm)
LEGEND FOR LEFT FOUNT
AIN:
A =
CUSPIDOR W
ASTE OUTLET LOCA
TION.
1-1/4" O.D. DRAIN (TRAP NOT FURNISHED)
B =
W
ALL HANGER - 12" (305mm) x 1" (25mm) FURNISHED LOOSE.
C =
MOUNTING HOLES FOR 1/4" DIA. (6mm) SCREWS.
Fully Recessed Wall Mount
Model EDFBC212C
RELEASE TUBE
P
BA
C
TUBE TO ATTACH
IN POSITION
TO RELEASE TUBE
SIMPLY PUSH IN
TUBE IS SECURED
PUSH IN COLLET
(
DIRECTION
SER
NOTE: WATERFLOW
OPERA
3/8" O.D. UNPLATED COPPER TUBE.
MATERIAL. SHUT OFF VALVE (NOT FURNISHED) TO ACCEPT
ARE MANUFACTURED OF COMPLETELY LEAD FREE
AND VALVE INCLUDING ALL CONNECTING FITTINGS WHICH
INLET
TO COOLER
COLD WATER SUPPLY
BUILDING WATER
WATER INLET
THIS DRINKING FOUNTAIN IS FURNISHED WITH A BUBBLER
1/4" O.D. TUBE
INSTALLER NOTE
INSTALLER NOTE
THIS DRINKING FOUNTAIN IS FURNISHED WITH A BUBBLER
AND VALVE INCLUDING ALL CONNECTING FITTINGS WHICH
ARE MANUFACTURED OF COMPLETELY LEAD FREE
MATERIAL. SHUT OFF VALVE (NOT FURNISHED) TO ACCEPT
3/8" O.D. UNPLATED COPPER TUBE.
1/4" O.D. TUBE
WATER INLET
TO COOLER
S P E C I F I C AT I O N S
3/8" O.D. TUBE CONNECT
COLD WATER SUPPLY
BUILDING WATER
INLET
OPERATION OF QUICK CONNECT FITTINGS
D = MOUNTING HOLES FOR 1/4" DIA. (6mm) SCREWS.
C = WALL HANGER - 12" (305mm) x 1" (25mm) FURNISHED LOOSE.
C =MOUNTING HOLES FOR 1/4" DIA. (6mm) SCREWS.
1-1/4" (32mm) O.D. DRAIN (TRAP NOT FURNISHED)
C = MOUNTING HOLES FOR 1/4" DIA. (6mm) SCREWS.
B =W
B = FOUNTAIN WASTE OUTLET LOCATION.
B = WALL HANGER - 12" (305mm) x 1" (25mm) FURNISHED LOOSE.
1-1/4" O.D. DRAIN (TRAP NOT FURNISHED)
3/8" (10mm) O.D. UNPLATED COPPER TUBE CONNECT.
1-1/4" (32mm) O.D. DRAIN (TRAP NOT FURNISHED)
A =CUSPIDOR W
A A
A = WATER INLET LOCATION.
A = CUSPIDOR WASTE OUTLET LOCATION.
AIN: T
LEGEND FOR RIGHT FOUNTAIN:
LEGEND FOR LEFT FOUNTAIN:
FINISHED FLOOR LINE
REQUIREMENT
ADA
(454mm)
(454mm)
*
RIM HEIGHT
17-7/8"
17-7/8"
(661mm)
(788mm)
(661mm)
(864mm)
26"
* 31"
* 26"
(699mm)
* 34"
(775mm)
(775mm)
* 27-1/2"
(216mm)4"(102mm)
(216mm)
(108mm)
* 30-1/2"
* 30-1/2"
(699mm)
8-1/2"
8-1/2"
4-1/4"
* 27-1/2"
(17mm)
(17mm)
(11mm)
(11mm)
(195mm)
11/16"
11/16"
7/16"
7/16"
(195mm)
7-11/16"
7-11/16"
(81mm)
D
3-3/16"
RIM HEIGHT
(1016mm)
(149mm)
40"
(25mm)
(149mm)
5-7/8"
PUSHPUSH
1"
5-7/8"
(3mm)
(3mm)
A
B
1/8"
1/8"
OF DRAIN
OF DRAIN
A
CENTERLINE
CENTERLINE
OPENING
OPENING
(676mm)
(676mm)
WALL
WALL
26-5/8"
26-5/8"
(749mm)
(749mm)
29-1/2"
29-1/2"
(826mm)
(826mm)
B
32-1/2"
32-1/2"
C
(146mm)
(146mm)
(146mm)
(146mm)
(17mm)
(17mm)
(273mm)
(13mm)
5-3/4"
5-3/4"
5-3/4"
5-3/4"
11/16"
11/16"
10-3/4"
1/2"
CENTERLINE
OF DRAIN
A
7-11/16"
(195mm)
30-1/2"
(775mm)
SIMPLY PUSH IN
TUBE TO ATTACH
11-3/4"
(298mm)
WALL
OPENING
10-3/4"
(273mm)
TUBE IS SECURED
IN POSITION
BA
1/2"
5-3/4"
(13mm)
(146mm)
32-1/2"
(826mm)
*
26-5/8"
(676mm)
5-7/8"
(149mm)
26"
(661mm)
1/8"
(3mm)
11/16"
(17mm)
(102mm)
B
4"
PUSH IN COLLET
TO RELEASE TUBE
C
PUSHING TUBE IN BEFORE
PULLING IT OUT HELPS TO
19"
(483mm)
16-1/2"
(419mm)
WALL OPENING
8-1/2"
(216mm)
17-7/8"
(454mm)
5-3/4"
(146mm)
1"
(25mm)
11/16"
(17mm)
MINIMUM
18" (457mm)
MAXIMUM
BETWEEN
WALL OPENINGS
11/16"
(17mm)
29-1/2"
(749mm)
WALL
OPENING
(1016mm)
RIM HEIGHT
27-1/2"
(699mm)
(864mm)
RIM HEIGHT
11/16"
(17mm)
40"
34"
5-3/4"
(146mm)
29-1/2"
(749mm)
WALL
OPENING
7/16"
(11mm)
27-1/2"
(699mm)
C
D
NOTE: WATERFLOW
19"
(483mm)
17"
(432mm)
WALL OPENING
P U S H P U S H
8-1/2"
(216mm)
17-7/8"
(454mm)
DIRECTION
5-3/4"
(146mm)
(11mm)
4-1/4"
(108mm)
A
1/8"
(3mm)
3-3/16"
(81mm)
7/16"
26-5/8"
(676mm)
5-7/8"
(149mm)
26"
(661mm)
(13mm)
32-1/2"
(826mm)
SERVICE STOP
(NOT FURNISHED)
1/2"
31"
(788mm)
10-11/16"
(272mm)
WALL
OPENING
CENTERLINE
OF DRAIN
7-11/16"
(195mm)
B
30-1/2"
(775mm)
LEGEND FOR LEFT FOUNTAIN:
A = CUSPIDOR WASTE OUTLET LOCATION.
1-1/4" (32mm) O.D. DRAIN (TRAP NOT FURNISHED)
B = WALL HANGER - 12" (305mm) x 1" (25mm) FURNISHED LOOSE.
C = MOUNTING HOLES FOR 1/4" DIA. (6mm) SCREWS.
Elkay
14-17J (Rev. 8/12)
2222 Camden Court
Oak Brook, IL 60523
elkayusa.com
FINISHED FLOOR LINE
LEGEND FOR RIGHT FOUNTAIN:
A = WATER INLET LOCATION.
3/8" (10mm) O.D. UNPLATED COPPER TUBE CONNECT.
B = FOUNTAIN WASTE OUTLET LOCATION.
1-1/4" (32mm) O.D. DRAIN (TRAP NOT FURNISHED)
C = WALL HANGER - 12" (305mm) x 1" (25mm) FURNISHED LOOSE.
D = MOUNTING HOLES FOR 1/4" DIA. (6mm) SCREWS.
Printed in U.S.A.
©2012 Elkay
Loading...