Elkay EDF214WC User Manual
18-3/16"
(462 mm)
FINISHED FLOOR LINE
27" (686 mm)
7-1/8" (181 mm)
1-5/8"
(42 mm)
13-3/4"
(349 mm)
2-5/16"
(59 mm)
2-15/16" (75 mm)
S P E C I F I C AT IO N S
ENERAL
G
Wall mounted drinking fountain constructed of durable, nonporous composite gel coated material. Available in Shadow
White color.
Contoured basin minimizes splashing and has LK142 pushbutton bubbler. Bottom cover plate included. Flow regulator
provides constant stream from 20 to 105 psi water pressure.
NO LEAD DESIGN
THIS DRINKING FOUNTAIN COMPLIES WITH THE LEADFREE DEFINITION IN THE SAFE DRINKING WATER ACT
OF 1986 AND LEAD CONTAMINATION CONTROL ACT OF
1988.
Elkay Drinking Fountains are manufactured with a waterway
system utilizing copper components and completely lead-free
material. These waterways have no lead because all leaded
materials, such as leaded brass, have been removed.
This fountain is certified by WQA to lead-free compliance including NSF/ANSI 61-ANNEX G, AB 1953.
CONSTRUCTION
EDF214WC furnished complete LK142 pushbutton bubbler,
low regulator (20 to 105 psi), and drain and trap assembly.
Bottom cover plate included.
ACCESSORIES
MPW101 In-wall carrier mounting plate.
ML100 Support columns for MPW101.
No Lead Drinking Fountain Soft Sides
Wall Mount – Fully Exposed
Model EDF214WC (Shadow White)
Model EDF214WC
Care and Maintenance of Elkay Composite Fountains
The composite fountain provides an extremely durable, nonporous
surface which resists staining. Care is very simple. Routine cleaning
with a soft sponge or cloth, or with water or non-abrasive aerosol foam
cleaner, is all that is normally needed to give many years of trouble free
service. Cleaners left standing on the fountain surface can dull the
surface finish. Be certain to rinse all cleaning agents completely and
polish with a soft cloth.
Harsh abrasive cleaners are not required and should not be used.
Mild abrasives such as liquid automotive cleaning compound or
baking soda paste will remove simple scratches and stains. Cigarette
burns can normally be removed without noticeable effect.
To maintain or regain luster and make cleaning easier, periodic
appli cations of automobile wax or like products will keep the finish
looking like new.
®
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
Elkay
elkayusa.com
2222 Camden Court
Oak Brook, IL 60523
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Printed in U.S.A.
©2011 Elkay
(Rev. 4/11) 14-28D
OPERATION OF QUICK CONNECT FITTINGS
INSTALLER NOTE
THIS DRINKING FOUNTAIN IS FURNISHED WITH A BUBBLER AND
VALVE INCLUDING ALL CONNECTING FITTINGS WHICH ARE
MANUFACTURED OF COMPLETELY LEAD FREE MATERIAL. SHUT
OFF VALVE (NOT FURNISHED) TO ACCEPT 3/8" O.D. UNPLATED
COPPER TUBE.
SIMPLY PUSH IN
TUBE TO ATTACH
TUBE IS SECURED
IN POSITION
PUSH IN COLLET
TO RELEASE TUBE
PUSHING TUBE IN BEFORE
PULLING IT OUT HELPS TO
RELEASE TUBE
AB
C
N
OTE: WATERFLOW
DIRECTION
SERVICE STOP
(
NOT FURNISHED)
3
/8" O.D. TUBE CONNECT
COLD WATER SUPPLY
1/4" O.D. TUBE
W
ATER INLET
TO COOLER
BUILDING WATER
INLET
3"
(76 mm)
4"
(102 mm)
1-1/2"
(38 mm)
2-5/8"
(66 mm)
WASHER REQUIRED
TO MINIMIZE BREAKAGE
OF FOUNTAIN
DETAIL 1
5-1/8"
(130 mm)
3/8" (10 mm) I.P.S.
WATER SUPPLY
5-1/8"
(130 mm)
31-1/4"
(794 mm)
1-5/16"
(34 mm)
4"
(102 mm)
1-1/4" (32 mm) I.P.S. WASTE
FINISHED FLOOR LINE
WALL SCREW HOLE
LOCATIONS FOR
SECURING FOUNTAIN
TO WALL
SEE DETAIL 1
OPERATION OF QUICK CONNECT FITTINGS
INSTALLER NOTE
THIS DRINKING FOUNTAIN IS FURNISHED WITH A BUBBLER AND
VALVE INCLUDING ALL CONNECTING FITTINGS WHICH ARE
MANUFACTURED OF COMPLETELY LEAD FREE MATERIAL. SHUT
OFF VALVE (NOT FURNISHED) TO ACCEPT 3/8" O.D. UNPLATED
COPPER TUBE.
SIMPLY PUSH IN
TUBE TO ATTACH
TUBE IS SECURED
IN POSITION
PUSH IN COLLET
TO RELEASE TUBE
PUSHING TUBE IN BEFORE
PULLING IT OUT HELPS TO
RELEASE TUBE
AB
C
N
OTE: WATERFLOW
DIRECTION
SERVICE STOP
(
NOT FURNISHED)
3
/8" O.D. TUBE CONNECT
COLD WATER SUPPLY
1/4" O.D. TUBE
W
ATER INLET
TO COOLER
BUILDING WATER
INLET
3"
(76 mm)
4"
(102 mm)
1-1/2"
(38 mm)
2-5/8"
(66 mm)
WASHER REQUIRED
TO MINIMIZE BREAKAGE
OF FOUNTAIN
DETAIL 1
5-1/8"
(130 mm)
3/8" (10 mm) I.P.S.
WATER SUPPLY
5-1/8"
(130 mm)
31-1/4"
(794 mm)
1-5/16"
(34 mm)
4"
(102 mm)
1-1/4" (32 mm) I.P.S. WASTE
FINISHED FLOOR LINE
WALL SCREW HOLE
LOCATIONS FOR
SECURING FOUNTAIN
TO WALL
SEE DETAIL 1
No Lead Drinking Fountain Soft Sides
Wall Mount – Fully Exposed
Model EDF214WC (Shadow White)
®
RO U G H - I N D I M EN S I O N S
Elkay
14-28D (Rev. 4/11)
2222 Camden Court
Oak Brook, IL 60523
elkayusa.com
Printed in U.S.A.
©2011 Elkay
Loading...