Elkay DPMSR12722PD User Manual
Dayton® Premium Single Bowl Sink
SPECIFICATIONS
GENERAL
S
ink formed of #18 (1.2mm) gauge, 300 Series
nickel-bearing stainless steel. Universal mount.
DESIGN FEATURES
Slim Rim: Ultra thin edge that virtually eliminates the barrier between the
sink and countertop, allowing for a universal (top or undermount) installation
option.
Bowl Depths: 8” (203mm).
Coved Corners: 1-3/4" (44mm) horizontal and vertical radii.
Finish: Exposed surfaces are polished to a Premium Satin finish.
Underside: Fully undercoated to reduce condensation and
dampen sound.
Perfect Drain: Seamlessly welded stainless steel collar eliminates the gap
between a traditional drain and the sink for a sanitary and gap free installation.
Each sink shipped with one LKPD1 drain kit, or a garbage disposer
can be installed on the sink bowl for user convenience.
Patent Pending
OTHER
Drain opening: 3-3/8" (86mm)
Waste Fitting complies with ASME A112.18.2/CAN/CSA-B125.2
Sink complies with ASME A112.19.3/ CSA B45.4
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
C
OPTIONAL ACCESSORIES
Bottom Grid: GBG2416SS
Cutting Board: CB1713, CBS1316
Mounting Hardware: LK364
Rinsing Basket: LKWRB2416SS, LKWERBSS
Utensil Caddy for Rinsing Basket: LKWUCSS
with Slim Rim
Model DPMSR12722PD
Model DPMSR12722PD
Top Mount Installation
Silicone Caulk
(Not Furnished)
Countertop
Screw
(Included)
Undermount Installation
Countertop
Mounting
Bracket
(Model LKUMB8
sold separately)
Designed to affix to the underside of any solid surface countertop.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for most current version of Elkay
product specification sheets.
Fastener
(Not Furnished)
Elkay
elkay.com
Sink
Clip
(Included)
Silicone Caulk
(Not Furnished)
Sink
2222 Camden Court
Oak Brook, IL 60523
3-1/2"
(89mm)
7-9/16"
(192mm)
Sink with Drain
Kit Installed
This specification describes an Elkay produc t w ith d esign, quality and functional b enefits to the
user. When making a comparison of o ther produc ers’ offerings, be c ertain these features are not
overlooked.
©2015 Elkay
(Rev. 01/15) SPEC00017
SPECIFICATIONS
SINK DIMENSIONS*
Model Number
DPMSR12722PD
*Length is left to right. Width is front to back.
(686mm)22(559mm)
22"
(559mm)
(406mm)
(203mm)
9-1/2"
(241mm)
Overall Inside Bowl
L W L W DD
27
9-1/2
(241mm)
16"
1-3/4" R
(44mm)
8"
1-3/4" R
(44mm)
24
(610mm)
16
(406mm)
24"
(610mm)
27"
(686mm)
(203mm)
8"
(203mm)
8
Cutout in
Countertop
1
/2" [38mm]
(1
Radius Corners)
L W
26-3/8
(670mm)
(543mm)
Dayton® Premium Single Bowl Sink
with Slim Rim
DPMSR12722PD
™
21-3/8
1
No. of 1
(38mm) Dia.
Faucet Holes
4" (102mm)
Center
1, 2,MR2,3,
4, or 5
Model
/2"
Minimum
Cabinet
Size
30
(762mm)
Elkay® Perfect Drain
sinks are designed and
approved for compatible
disposers manufactured by
InSinkErator
Quick Lock
utilizing the
®
mounting
®
conguration. Use of
non-approved disposers
may void Elkay warranty.
InSinkErator, Quick Lock
and the mounting
collar conguration
are trademarks of
Emerson Electric Co.
Hole Drilling Configurations
"
(38mm) Diameter Faucet Holes
1-1/2
1
MR2 3
4 5
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for most current version of Elkay
product specification sheets.
Elkay
elkay.com
2222 Camden Court
Oak Brook, IL 60523
2
This specification describes an Elkay produc t w ith d esign, quality and functional b enefits to the
user. When making a comparison of o ther produc ers’ offerings, be c ertain these features are not
overlooked.
©2015 Elkay
(Rev. 01/15) SPEC00017
Loading...