Elkay CUSL-31 User Manual

LIST PRICE CUSL-31

Effective: December 4, 2006
Supersedes CUSL-30

TERMS AND CONDITIONS

Pricing

All prices and product specifications are subject to change without
notice. Prices are F.O.B. factory. No freight allowance.

Taxes

All Federal, State or Local Taxes when appropriate to be added.

Electronic Data Interchange (EDI)

Elkay supports the following EDI transaction sets: Inbound Purchase
Orders (850), Outbound Invoices (810), Advanced Ship Notice
(856), Inbound Remittance Advice (820) and Outbound Order
Acknowledgement (855). Please contact Elkay’s EDI Coordinator at
[phone] to discuss the list of current transaction set versions
and your implementation requirements.

Cancellation

On custom made models designed to customer’s specifications,
an engineering charge will be assessed if order is cancelled before
fabrication has commenced. If cancellation is after fabrication is
started, cancellation charge will be dependent on extent of work
performed.

Return Goods

No returns allowed on custom made products.

Limited Warranty

All Elkay products are warranted to be free from manufacturing
defects. If item is defective due to faulty materials or workmanship,
a new item or like type and size will be supplied. (This warranty
does not cover installation charges.)

Loss and/or Damage in Transit

Our liability ceases upon delivery of the goods to the carrier at our
factory. Claims for damage and/or loss in transit to be made by the
consignee against the carrier. We will assist and cooperate in the
processing of such claims upon customer’s request.

Payment Terms

2% 10th prox.

ARCHITECTURAL SPECIFICATIONS

Custom made stainless steel sink tops and countertops shall be of
sizes and dimensions as shown on plans, and be as manufactured
by ELKAY MANUFACTURING COMPANY, Broadview, Illinois and
shall be fabricated as follows:

Shall be made of #18 gauge, Type 304, 18-8 stainless steel
bonded to and reinforced with #14 gauge steel plate welded to
3/4"x3/4"x1/8" angle iron. 1 1/2" thick wood strips provided for
fastening to cabinets. One-piece construction of drainboards, rims,
back and return end/s with intersections of 1/4" radius. Drainboards
with fan-shaped drain area. Sink bowls with 1 3/4" radius for
horizontal and vertical corners integrally and seamlessly welded
into top. Overlapping or soldered edges not permitted. Underside
sound-deadened. Exposed surfaces blended to an Elkay satin
finish.

Custom Made
Stainless Steel
Sink Tops and Countertops

Elkay’s reputation for attention to fabricating details and
superior craftsmanship in working with corrosion resistant
stainless steel extends well over 80 years. Elkay will also
counsel in the design and layout planning of your requirements.

Elkay Phone: [phone]
2222 Camden Court Fax: [phone]
Oak Brook, Illinois 60523 U.S.A. Customer Service: [phone]
elkayusa.com

All dimensions are in inches. To convert to millimeters, multiply inches by 25.4.

Illustration A

ELKAY POINTS OF SUPERIORITY

1. Elkay “Lusterton” Custom Cabinet Sink and Countertops are fabricated of
#18 gauge nickel bearing (18-8, Type 304) stainless steel bonded to, and
reinforced with, #14 gauge steel plate and 3/4"x3/4"x1/8" angle iron.

2. Intersections where sink bowls meet drainboards are rounded to
sanitary radii.

3. Drainboard, sink bowls, raised rims and backsplash are welded,
ground and polished smooth to a one-piece seamless appearance.

4. All corners in sink bowls (horizontal and vertical) are rounded to
1 3/4-inch radii.

5. Drainboards have large, fan-shaped areas pitched to drain. To incorporate
pitch, drainboard must be minimum 15" long.

6. Entire underside of sink top and bowl is fully undercoated to dampen sound
and prevent condensation.

7. Superior surface finish and satin luster achieved through special hand
polishing operations by master craftsmen.

HOW TO PRICE

For Basic Counter Tops up to 25" wide

1. Add all wall dimensions to determine total linear inches of counter. From
Schedule for Countertops on page 3 locate total inches column one. Under
proper backsplash height column, read total price of basic counter.

2. When sink bowl is desired, add to price of basic counters, the price of sink
model chosen, as shown on pages 4 and 5 (custom sizes are available).

3. Add the price of all special features applicable, as shown on pages 6 and 7.

HOW TO ORDER

1. When ordering Elkay custom made stainless steel sink and countertops,
accuracy of dimensions is of the utmost importance.

2. Furnish a sketch of sink or counter arrangement marked with proper
dimensions, and special features. Remember, you cannot give too

much information.

3. Always include the following information:
a) Show dimension from end of counter to center line of single

compartment sink models…or

b) Show dimension from end of counter to center line of partitions of two or

more compartment sink models.

c) Specify model number of faucet and other trim desired, if not included

with the sink model chosen.

d) Indicate manufacturer’s name and complete model number of range unit

to be installed if applicable.

e) Indicate and locate all cutouts or special conditions you require.

(See pages 6 & 7.)

HOW TO MEASURE

1. Measure, in inches, along wall or walls where top is to be installed.

2. Establish overall counter width, front to back, (standard is 25"), including
backsplash thickness.

3. Determine height of backsplash (measured from top of raised rim.)*
(Standard is 4") Determine thickness of backsplash, (Standard is 1 1/2").

4. Determine sink bowl size and its location. (See pages 4 and 5.)

5. List special features such as range cutout, return ends, rounded corners,
etc. (See pages 6 and 7.)

* Explanatory Note:

Elkay Custom Sink Tops and Countertops are provided with our standard
5/32" raised rim. Flat rim is available at no additional charge. For rims other
than 5/32" or flat, please refer to Custom Feature #17 on page 7.

Wall Dimensions (4" Backsplash)
96"+ 126"+ 60"= 282":

Base 156" . . . . . . . . . . . . . . . .$ 3,041.00

Additional 126" @ $18.00 . . . . . . . . . . . . . . .2,394.00

(a) Field Joint w/4" back . . . . . . . . . . . . . . . . . .903.00

(b) “U" Weld w/4" back . . . . . . . . . . . . . . . . . . .722.00

(c) LR3722 Double Bowl . . . . . . . . . . . . . . . .1,621.00

(d) 12" Radius Calculations

Base 3" . . . . . . . . . . . . . . . . . . . .135.00

Additional 9" @ $26.00 . . . . . . . . . . . .252.00

(e) Range Cutout . . . . . . . . . . . . . . . . . . . . . . .304.00

(f) Partial Column Cut . . . . . . . . . . . . . . . . . . .311.00

(g) Full Column Cut . . . . . . . . . . . . . . . . . . . . .549.00

TOTAL LIST PRICE . . . . . . . . . . . . . . . . . . .$10,232.00

Limitation profile of sink when
wall faucets are used.

* 1 1/4" top thickness can be furnished when specified at no additional cost.

Limitation profile of sink when
deck faucets are used.

This is an example of pricing a
custom made unit. The sink is
Model LR3722, double
compartment, top has 4" high
backsplash and top has a flat rim.

List Price CUSL-31

Effective: December 4, 2006
(Supersedes CUSL-30)

Illustration B

Underside view of construction detail

Illustration C

2

HEIGHT OF BACK

FROM TOP OF

RAISED RIM

HEIGHT OF BACK

FROM TOP OF

RAISED RIM

BOWL INSIDE

2" MIN.

2" MIN.

3 3/4"

MIN

3/4" OR

MORE

(1 1/2" STD.)

*1 1/2"

1 1/2" MIN.

*1 1/2"

BACKSPLASH

USUALLY 1 1/2"

THICK TO ALLOW

FOR SUPPLY LINES

14 GA. STEEL PLATE

REINFORCING

18 GA. STAINLESS STEEL TOP

WOOD STRIP

UNDERSIDE IS FULLY UNDERCOATED TO
DAMPEN SOUND AND PREVENT CONDENSATION.

STAINLESS STEEL TOP

WOOD STRIP

3/4" X 3/4" X 1/8"

ANGLE IRON

BOWL

EXCEEDS 1/8"

THICKNESS

126"

63"

2 1/8"

8"

12"

54"

96"

25"

25"

60"

8"

4"

WELD

(b)

FIELD JOINT

(a)

12"

12" RADIUS

(d)

PARTIAL

COLUMN CUT

(f)

FULL

COLUMN CUT

(g)

(c)

(c)

RANGE

CUTOUT

(e)

DROP-IN

CCuussttoomm MMaaddee SSiinnkk PPrroodduuccttss

List Price CUSL-31

Effective: December 4, 2006
(Supersedes CUSL-30)

All dimensions are in inches. To convert to millimeters, multiply inches by 25.4.

• List prices on this page cover countertops only.

• For in-between sizes use price of next longer size.

• Length, inches are total wall measurement (straight, L or U shape).

• Prices shown are for countertops up to 25" wide.
For tops over 25" wide, see Illustration D.

• Pages 4 and 5 show sink bowls and list prices.

• Pages 6 and 7 show prices for additional custom features.

For Tops Exceeding 25" Wide

For sink and/or countertops wider than 25"…
add the desired width of top (A) to height of back (B) and use following:

a) When total of A plus B is 29" or less, use price column under 4" back.
b) When total of A plus B is over 29" to 33" inclusive, use price column

under 8" back.

c) When total of A plus B is over 33" to 37" inclusive, use price column

under 12" back.

d) When total of A plus B is over 37" to 41" inclusive, use price column

under 16" back.

For tops with field joint

(For site assembly)
For straight, “L” or “U” shaped units requiring field joint (because of structural

limitations) add for each field joint:

Unit with no back (up to 25" wide) add . . . . . . . . . . . . . . . . . . . . . . . $ 810.00

Unit with 4" back or less add . . . . . . . . . . . . . . . . . . . . . . . . . . . . 903.00

Unit with back over 4" add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,128.00

For welded one piece tops...“L” or “U” shapes.

In pricing tops use full wall dimensions and add for each weld as follows:

Unit with no back (up to 25" wide) add . . . . . . . . . . . . . . . . . . . . . . . .$ 647.00

Unit with 4" back or less add

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .722.00

Unit with back over 4" add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .897.00

BACKSPLASH HEIGHTS

Length in Inches No Back 4" Back 8" Back 12" Back 16" Back

15" $ 426.00 $ 462.00 $ 492.00 $ 515.00 $ 548.00
18" 478.00 518.00 553.00 583.00 625.00
21" 530.00 574.00 614.00 652.00 699.00
24" 583.00 628.00 675.00 720.00 774.00
27" 635.00 683.00 736.00 790.00 850.00
30" 689.00 737.00 798.00 858.00 927.00
33" 773.00 793.00 859.00 926.00 1,030.00
36" 830.00 847.00 921.00 995.00 1,106.00
39" 845.00 902.00 964.00 1,064.00 1,181.00
42" 878.00 957.00 1,043.00 1,132.00 1,256.00
45" 915.00 1,012.00 1,104.00 1,201.00 1,332.00
48" 951.00 1,067.00 1,165.00 1,269.00 1,407.00
51" 987.00 1,121.00 1,226.00 1,338.00 1,483.00
54" 1,022.00 1,177.00 1,287.00 1,406.00 1,558.00
57" 1,074.00 1,232.00 1,349.00 1,474.00 1,634.00
60" 1,122.00 1,285.00 1,410.00 1,544.00 1,709.00
63" 1,147.00 1,341.00 1,471.00 1,612.00 1,784.00
66" 1,170.00 1,396.00 1,532.00 1,681.00 1,861.00
69" 1,265.00 1,450.00 1,594.00 1,749.00 1,936.00
72" 1,313.00 1,505.00 1,654.00 1,818.00 2,011.00
75" 1,361.00 1,554.00 1,716.00 1,889.00 2,089.00
78" 1,408.00 1,616.00 1,777.00 1,957.00 2,167.00
81" 1,457.00 1,670.00 1,838.00 2,026.00 2,265.00
84" 1,505.00 1,725.00 1,900.00 2,095.00 2,323.00
87" 1,570.00 1,780.00 1,961.00 2,164.00 2,401.00
90" 1,634.00 1,835.00 2,021.00 2,232.00 2,475.00
93" 1,698.00 1,890.00 2,083.00 2,306.00 2,559.00
96" 1,762.00 1,944.00 2,144.00 2,380.00 2,641.00

99" 1,828.00 1,999.00 2,205.00 2,454.00 2,721.00
102" 1,880.00 2,053.00 2,266.00 2,527.00 2,802.00
105" 1,932.00 2,109.00 2,327.00 2,601.00 2,883.00
108" 1,986.00 2,165.00 2,389.00 2,675.00 2,963.00
111" 2,039.00 2,219.00 2,450.00 2,749.00 3,044.00
114" 2,092.00 2,274.00 2,511.00 2,823.00 3,124.00
117" 2,145.00 2,328.00 2,572.00 2,896.00 3,206.00
120" 2,198.00 2,383.00 2,634.00 2,976.00 3,290.00
123" 2,250.00 2,437.00 2,695.00 3,055.00 3,374.00
126" 2,304.00 2,493.00 2,756.00 2,134.00 3,459.00
129" 2,357.00 2,548.00 2,817.00 3,212.00 3,543.00
132" 2,410.00 2,602.00 2,878.00 3,292.00 3,627.00
135" 2,463.00 2,657.00 2,939.00 3,372.00 3,712.00
138" 2,516.00 2,712.00 3,001.00 3,451.00 3,796.00
141" 2,569.00 2,767.00 3,062.00 3,530.00 3,881.00
144" 2,623.00 2,823.00 3,123.00 3,608.00 3,965.00
147" 2,675.00 2,876.00 3,184.00 3,688.00 4,050.00
150" 2,729.00 2,932.00 3,245.00 3,767.00 4,134.00
153" 2,782.00 2,986.00 3,307.00 3,847.00 4,218.00
156" 2,836.00 3,041.00 3,368.00 3,926.00 4,302.00

Over 156" add for

18.00 19.00 20.00 27.00 29.00

each inch*
*Extra charge for

length weld for Tops 647.00 722.00 897.00 954.00 1,031.00
over 156" long

Approx. ship wt. per

22# 24# 26# 28# 30#

linear foot

* Note: For dimensions in fractions of an inch, round up to next full inch to calculate price.

Illustration D

A

B

WELD

WELD

STEEL ANGLES

SCHEDULE FOR COUNTERTOPS

Illustration E

Illustration F

3

CCuussttoomm MMaaddee CCoouunntteerrttooppss