Elkay CR250 User Manual
GENERAL
Good quality sink formed of #20 gauge, type 304 (18-8) nickel
bearing stainless steel. Self-rimming.
DESIGN FEATURES
Bowl Depth: 7" (large bowl), 6-7/8" (small bowl).
Coved Corners: 3" vertical radius, 2-1/4" horizontal radius.
Bowl and Faucet Deck Recess: 3/16" below outside edge of
sink.
Finish: Exposed surfaces are polished to a lustrous, highlighted
Celebrity bright satin finish.
Underside: Fully undercoated to dampen sound and prevent
condensation.
OTHER
Drain Opening: 3-1/2".
NOTE: Unless otherwise specified, sink is furnished with 4 faucet
holes as shown.
OPTIONAL ACCESSORIES
Rinsing Baskets: LKWRB1318SS (large bowl), LKWRB1316SS
(small bowl), LKWERBSS (either bowl).
Utensil Caddy for Rinsing Basket: LKWUCSS.
Bottom Grid: LKWBG1415SS (small bowl).
Cutting Board: CBR1316 (large bowl), CB1516 (small bowl).
This sink complies with ASME A112.19.3.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2007 Elkay
(Rev. 5/07) 1-11G
elkayusa.com
Model CR2504
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT
TO MILLIMETERS MULTIPLY BY 25.4.
Celebrity®Double Bowl Sink
Model CR250
®
SPECIFICATIONS
This sink is listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
Model CR2504 Illustrated
4" 4"
4-1/4"
7"
14"13-1/2"
33"
2-1/4" R
15-3/4"
22"
2-3/4"
3" R
18"
15"
4"
6-7/8"
CR2501
CR250S2
CR2502
CR2504
CR2503
HOLE DRILLING CONFIGURATIONS
4"
4" 4"
4" 4" 4"
12"
SINK DIMENSIONS (INCHES)*
*Length is left to right. Width is front to back.
Cutout in
No. of
Countertop
1
1
/2" Dia.
Inside Inside (1
1
/2" Radius
Faucet Minimum
Model
Overall Left Bowl Right Bowl Corners)
Holes Cabinet
Number L W L W D L W D L W 4" Center Size
CR250 33 22 131/2 18 7 14 153/4 67/8 323/8 213/8 1, 2, S2, 3, 4 36
Loading...