Hand Wash-Up Sink with Side Splashes
Type 304
Models CHS1716LRSC and CHS1716LRS
SPECIFICATIONS
GENERAL
CHS1716LRSC Type 304 (18-8) stainless steel hand wash-up
sink with 7" (178mm) high right and left side splashes. Basin
has 1-3/4" (45mm) radius coved corners. Full length 7"
(178mm) high backsplash. Exposed surfaces have a brushed
finish. Furnished with a wall hanger and integral stainless steel
support brackets. Carries NSF International Certification.
FURNISHED COMPLETE WITH:
SUPPLY: LK499A Chrome plated gooseneck spout faucet with
AE13A aerator.
DRAIN: LK8 Chrome plated stamped brass perforated strainer
grid. 1-1/2" (38mm) O.D. x 4" (102mm) tailpiece.
TRAP: LK500 Chrome plated cast brass 1-1/2" (38mm) O.D.
“P” trap with cleanout, 1-1/2" (38mm) O.D. waste arm
to wall, and wall flange.
FOLLOWING MODEL DOES NOT INCLUDE FAUCET AND
FITTINGS:
CHS1716LRS
SPECIFY FAUCET DRILLINGS AND LOCATION.
(See other side for standard faucet hole drilling configurations.)
®
Model CHS1716LRSC
15-1/2"
(394mm)
8-1/2"
(216mm)
1-1/2"
(38mm)
2-3/8"
(60mm)
2"
(51mm)
3-7/8"
(98mm)
9-1/4"
(235mm)
2-3/8"
(60mm)
7"
(178mm)
(152mm)
(152mm)
16-3/4"
(425mm)
(305mm)
1-3/4" R
(45mm)
3/8" (10mm) x 1-1/4" (32mm)
LONG SLOT
6"
6"
1-3/4" R
(45mm)
(381mm)
12"
15"
2-3/8"
(60mm)
2-3/16" DIA. HOLE
(56mm)
RAISED RIM AT
FRONT & SIDES
WALL HANGER
12" (305mm) LONG
BACKSPLASH SLOPED
AT 45° ANGLE
SEE OTHER SIDE FOR FAUCET
HOLE DRILLING CONFIGURATIONS
2-3/4"
(70mm)
3-1/4"
(83mm)
STAINLESS STEEL
BRACKETS WITH
HEMMED EDGE
3/8"
(10mm)
40°
SECTION THROUGH RIM
1/8" R
(3mm)
1-1/2"
(38mm)
8-1/2"
(216mm)
7"
(178mm)
Elkay
www.elkay.com
1-1/2" (38mm)
I.P.S. WASTE
Model CHS1716LRSC Illustrated
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
2222 Camden Court
Oak Brook, IL 60523
PART NO. 74180184
Printed in U.S.A.
©2013 Elkay
(6/13) 4-17B
Hand Wash-Up Sink with Side Splashes
Type 304
Models CHS1716LRSC and CHS1716LRS
SPECIFICATIONS
HOLE DRILLING CONFIGURATIONS
®
7"
(178mm)
7"
(178mm)
4"
(102mm)
4"
(102mm)
8-3/8"
(213mm)
4-3/8"
(111mm)
8-3/8"
(213mm)
CHS1716LRS1
8"
(203mm)
1-1/4" (32mm) DIA.
1 HOLE
4-3/8"
(111mm)
1-1/2" (38mm) DIA.
2 HOLES
Elkay
4-17B (6/13)
7"
(178mm)
(162mm)
4"
(102mm)
2222 Camden Court
Oak Brook, IL 60523
CHS1716LRS2
6-3/8"
CHS1716LRS4
4"
(102mm)
6-3/8"
(162mm)
1-1/4" (32mm) DIA.
2 HOLES
Printed in U.S.A.
©2013 Elkay