Elkay Allure Installation Instructions Manual
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2007 Elkay
(Rev. B 7/07)
A-55335
elkay.com
LK6165
LK6166
LK6175
LK6176
How to Install
Allure®Faucets
ELKAY • 2222 CAMDEN COURT • OAK BROOK, IL 60523
SAVE FOR CONSUMER
Limited Lifetime Functional and Finish Warranty
Elkay warrants to the original consumer purchaser that the
Elkay faucet purchased will be free from defects in material and
workmanship for as long as the original consumer purchaser
owns the faucet. Elkay will, at its option, supply replacement
parts (or if no longer available a comparable product) if the
faucet fails due to a defect in material or workmanship. This
warranty does not apply in the event of product surface damage caused by abuse, misuse or improper care and maintenance. This warranty excludes damage caused by harsh or
abrasive cleaners and/or materials. This warranty excludes all
industrial, commercial and business use, whose purchasers are
hereby extended a limited lifetime on mechanical parts and
5 years on finish. Product replacement does not include transportation cost or labor installation cost. Elkay reserves the right
to examine product in question and its installation prior to
replacement.
OTHER WARRANTY CONDITIONS ON FAUCETS
Our warranty does not cover product failure or damage caused
by abusive treatment, misuse, environmental factors, improper
care and cleaning, or damage due to handling or faulty installations. This warranty is extended only to the original consumer purchaser of the product. This warranty does not cover
shipping costs, labor costs, or any other charges for such items
as installation or replacement of the sink, diagnosis or replacement of any faucet or component part, or any other expense or
loss.
All incidental or consequential damages are specifically
excluded. No additional warranties, express or implied are
given. Any implied warranty, including one of merchantability or fitness for a particular purpose, is limited to the
duration of this written warranty.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an
implied warranty lasts, so the above limitations or exclusions
may not apply to you.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
TO OBTAIN SERVICE UNDER WARRANTY
1. Write to: Elkay
Attention: Consumer Services
2222 Camden Court
Oak Brook, IL 60523
2. Include a letter containing the following information:
a. Date of purchase and installation
b. Description of nature of defect
c. Model number or description of model and/or com-
ponent part if possible.
ELKAY LIMITED LIFETIME FAUCET WARRANTY ON RESIDENTIAL FAUCETS
IMPORTANT CONSUMER INFORMATION
Care and Cleaning Instructions
Your Elkay faucet has been constructed of the finest materials, however,
certain precautions must be taken to maintain the lustrous decorative finish.
Do not use abrasive cleansers or harsh chemical cleansers on this product
which could damage the finish.
A warm water wash with a wipedown using a soft cloth will generally remove
dry water spots. Never use alcohol or other organic solvents.
A high quality wax, which does not contain abrasives, should be applied
periodically to preserve the fine finish of your faucet.
Replacement Cartridge
These faucets use cartridge A54236R.
LK6155
Installation Instructions
NOTE: DUE TO THE WEIGHT OF THE ALLURE FAUCETS, ELKAY
RECOMMENDS THESE FAUCETS BE INSTALLED TO AN 18 GAUGE
STAINLESS STEEL SINK (OR HEAVIER) OR TO A SOLID SURFACE
COUNTERTOP.
Maximum thickness for solid surface countertop is 1-1/2".
Installation Instructions for LK6155
1. Place the faucet base in the faucet hole. Make sure O-ring is placed
between the faucet and the sink (or countertop).
2. Slip the shaped rubber washer over the supply pipes and fasten by fixing
the claw and the mounting nut to be tightened on the bolt.
3. Connect the flexible supply tubes to water supply.
4. Place the washer and drain in faucet hole. Washer (1) to be in between drain
and sink.
5. Place other washer (2) on top of body and screw onto the drain.
6. Fix the horizontal rod (with ball) to the drain. The horizontal rod must be perpendicular to the wall.
7. Insert the vertical rod in the hole in the back of the faucet and connect it to
the horizontal rod with the clamp.
8. Connect shank extension to mounting shank using 2 copper gaskets.
Then attach diverter housing to bottom of shank after inserting a 3/4" fiber
washer. Note: Ensure white retaining sleeve remains in diverter housing.
9. Connect check valve adaptor to diverter housing and diverter return hose
to adaptor using two 7/16" fiber washers.
10. Attach spray hose adaptor to bottom of diverter using a 1/2" fiber washer.
Installation Instructions for
LK6165, LK6166, LK6175 and LK6176
1. Insert the spout into the faucet body and lock it with set screw. (Some models
are pre-assembled.)
2. Position base sleeve into faucet body. Place plastic washer onto base.
3. Attach 2 supply hoses to faucet body, passing through faucet base.
4. Attach mounting shank to faucet body in similar manner. Attach diverter
return hose in similar manner.
5. Pass hoses throough hole in deck, making sure plastic ring is positioned
between faucet base and deck.
6. If required position support bracket underneath deck.
7. Slip rubber C washer and C bracket over shank and around hoses. Secure
faucet assembly with mounting nut.
1. Place side spray escutcheon through deck hole. Ensure o-ring remains in
position under escutcheon.
2. Place metal washer on shank and secure escutcheon with nut.
3. Slip hose through escutcheon and attach spray hose to side spray adaptor
using a 1/2" fiber washer.
4. Check that all fittings are tight. Check for leaks.
1
2
3
Diverter
Return Hose
Mounting Shank
Plastic Deck Ring
Support Bracket
Rubber “C” Pad
“C” Bracket
Mounting Nut
2 Copper Gaskets
Shank Extension
(2) 7/16" Fiber
Washers
Check Valve
Adaptor
Spray Hose
Diverter Housing
3/4" Fiber Washe
r
(2) 1/2" Fiber
Washer
Spray Hose
Adaptor
Loading...