ELK 800 Specsheet

10 Watt Audio Amplier

ELK-800

The ELK-800 is a great compact audio amplier
It may be connected to an audio source, i.e.
microphone, telephone system paging output,
etc., even an ordinary single line phone set.
The audio source is amplied up to 10 watts,
adjustable from an on-board volume control.
Remotely installed, it saves money by requiring
only 22 - 24 gauge telco or alarm type wire. It
operates on 12 -24 volts A.C. or D.C. and can
also drive multiple speakers.

Features

• Small, Compact Public Address Amplier.

• Expanded Telephone System Paging.

• Amplied Telephone Ringer (where speaker tone signaling is available)

• Built-in Volume Control.

• Does Not Require 25 or 70 Volt Line Transformers.

• Drives Ordinary Horn or Cone Speakers.

• Requires only 22-24 gauge telco wire.

• Compact Size.

• Surface Mount ABS Enclosure with Snap-On Cover.

• Lifetime Limited Warranty.

Specications

• Output Rating: 10 Watts.**

• Power Input: 12 to 24 Volts A.C. or D.C.**

• Speaker (Output) Load: 2 to 16 Ohms.**

• Current Draw: 50 to 800mA (depending on load and volume setting)

• Input Impedance: 1000 Ohms Nominal.

• Enclosure Size: 4.5” x 3” x 1.2” (111.8mm x 76.3mm x 29.2mm).

PO Box 100 • Hildebran, NC 28637 • 800-797-9355 • 828-397-4200
Fax [phone] • www.elkproducts.com • [e-mail]