Elite Security Products HDVIP4R2TB, HDVIP116R12TB, HDVIP8R4TB, HDVIP4R4TB, HDVIP32R116TB User guide
...Page 1
NVR Quick Start Guide
The latest product manual and software is available online:
https://www.espuk.com/technical_support/
www.espuk.com
Page 2
Connection Diagram
Please Note: The below diagram covers the complete ESP range, there may be slight differences
dependent on the model specified.
345
9
1
2
6
8
7
10
1. IP Camera Connection (POE)
2. Router Connection
3. Line In
4. Audio Out
5. External HDD Connection (to backup files stored on the NVR)
6. VGA Monitor Output
7. HDMI Monitor Output
8. USB Port for USB Drive and Mouse Connection
9. Alarm In, Alarm Output, RS485 Connection
10. USB Port for USB Drive and Mouse Connection
11. Power Switch On/Off
12. Power Input Socket (Use only the PSU supplied)
11
12
Startup Wizard
A connection to a monitor is required for the NVR to complete the
general setup.
When power is applied to the NVR the Startup Wizard takes the
user through the general setup.
22
Page 3
Network Connection
Date and Time Setting
System Password
To remotely view the system the NVR requires a
connection to a network.
If the network allows and has DHCP function enabled,
then the network details will automatically be assigned
if the LAN cable is connected to the router.
If the network does not allow DHCP, then the network
details will need to be applied manually by competent
persons.
It is important to set the time and date in order to
review recorded data.
If the NVR is networked an NTP (Network Time
Protocol) address can be entered to insure consistently
high degrees of accuracy.
It is a requirement to set a password immediately in order to protect the system and privacy.
Record the user name and password and save in a secure place.
IP Cameras
The system will recognise auto configured IP cameras
once connected.
The user can select which IP cameras to add to
the system.
3
3
Page 4
Disk
Resolution
The Disk menu displays information from the installed
Hard Drive Disk.
On first use the HDD will need to be formatted.
To benefit from the best display picture quality, the
resolution of the HDMI output can be adjusted to suit
the system monitor’s highest resolution.
Mobile : APP Connectivity
Once the NVR has been networked, the system is
remotely accessible via APP.
From APP store (IOS/play) download the ESP IPView
APP. The user scans the QR code to add the unique ID
of the NVR in the setup.
4
Page 5
Summary
Live Screen Overview
The last menu of the Wizard start-up feature.
Review settings before selecting ‘Finish’.
5
Page 6
Search and Play Recordings
Backup Function
6
Page 7
7
Page 8
Mobile : APP Connectivity
1. Search ESP IP View from Google Play Store for android devices or App Store or iOS devices
and install.
2. Run the app to display the live view
3. Touch the icon to open the menu.
4. Select ‘Device List’
5. Select ‘ADD’ and scan the QR code
located on the NVR.
QR Code
6. Enter the NVR’s password and
select ‘Save’
After all settings are completed the
APP will turn to Live view display
with camera images.
8
Page 9
PC: Software Connectivity
The system can be accessed remotely via PC software.
To remotely access the NVR with the supplied software, please review the full product manual
to insure PC settings and requirements are met.
Disclaimer
(i) As with all software and hardware dependent devices, ESP are unable to guarantee that
every device will be compatible with the supplied product and software.
Specific models of phone, tablet or other devices, the hardware it contains, the service
provider, the types of data services offered and variations in version numbers can affect
the performance.
(ii) IP enabled devices should always be installed by competent /experienced persons.
9
Page 10
Notes
10
Page 11
Notes
11
Page 12
Elite Security Products
Unit 7, Target Park,
Shawbank Road, Lakeside,
Redditch B98 8YN
Telephone: 01527 51 51 50
Fax: 01527 51 51 43
Email: info@espuk.com
www.espuk.com
E&OE - Errors and omissions excepted.I19
www.espuk.com
Loading...