Elite Screens Pop-Up Cinema Series User Manual

A. Carrying Bag x1

B. Screen x1

C. Net Base x1

D. Support Bar x2

E. Stake x4

Installation Set-Up:

1) Take out the screen and net base from the
carrying bag and expand them.

2) Connect the Screen to the net base.

Projection Screen
Net Base

Velcro Connection

Pop-Up Cinema Series

Indoor/Outdoor Portable Pop-up Projection Screen

User’s Guide

Thank you for choosing the Pop-Up Cinema portable projection screen! Please read through this user
guide before utilizing the screen. Correct usage and maintenance will ensure a long product life.

Parts List

Note: The parts list above is subject to change without notice.

070114-ESA www.elitescreens.com 1

3) Insert the support bar behind the screen and then
connect the rod sections so that it is at maximum
length.

4) Ground the net base with the stakes.

Disassembling the screen

1) Step on the back end of the screen and bring
middle part of screen or net base towards you

approximately 12” from your foot and hold that

down stepping on it with your other foot.

3) Bring the right side in toward your left foot and
bring the left side towards your right foot.

2) While holding the material down with both feet,
lean forward and grab the left and right side.

4) With your feet in position, bring both left and
right sides in towards the ground.

Support
Bar

Connector

Support Bar

Screen

Net Base

Stake

Stake

12”

Screen

Screen

1

2

Screen

070114-ESA www.elitescreens.com 2