Elite Screens PC45W User manual

PicoScreen™ Series
35”/45” Diagonal Portable Table-top Projection Screen
Quick Setup Guide
What’s included?
Canvas bag x 1 PicoScreen x 1
Setup
Hold the unit with one hand and with the other hand, grip the handle and pull out the screen to the desired height.
Retract
Gently push down the top center of the screen and retract back into housing. Do not attempt to retract from the left or right side to avoid the material from rolling unevenly and permanently damaging the product.
Attention:
Surface can be cleaned with mild soap and water. Avoid screen material contact with any hard or sharp objects.
To avoid any injury, please press the screen slowly until it is fully retracted.
Rev. 142417 www.elitescreens.com 1
Tilt Adjustment Instructions Guide
If, in rare instances, your PicoScreen™ does not stand perfectly straight, please follow the steps below to adjust.
1. Front Tilted 2. Rear Tilted 3. Normal
Setup
1. Fully deploy the screen from the case.
2. Using one hand to keep hold of the base, use the other hand to gently pull the screen towards the appropriate direction to bring it back to a normal position. See figures be low.
1. Front Tilted 2. Rear Tilted
For more information, technical support or your local Elite Screens contac t,
please visit www.elitescreens.com
Rev. 142417 www.elitescreens.com 2
Loading...