Elite Screens OMS90H2, OMS100H2, OMS110H2, OMS120H2, OMS135H2 Service Manual

Yard Master 2 Series

Indoor/Outdoor Portable Projection Screen

User’s Guide

Thank you for choosing the Yard Master 2 portable projection screen! Please read through this user guide
beforeutilizing the screen. Correct usage and maintenance will ensure a long product life

Care & Use Instructions

◆ Please be sure to distinguish between the front and back of the screen fabricwhen setting up the

projection screen. CineWhite (front projection) has a black backing and WraithVeil (rear projection) is

labeled front, back.

◆Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the

points below to prevent that from occurring:

1. Do not touch the projection surface with your hands

2. Do not write or draw on the projection surface

3. Do not use fingers or sharp objects to point on the projection surface; this will damage the screen material.

4. Use a soft-damp clothto clean the projection surface; do not use chemical cleaning agents or alcohol.

5. Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.

◆After using the screen, disassemble it and store it in the carrying bag provided.

◆To avoid damage and injury, the screen should only be operated by adults.

Product Description

Design: The aluminum frame is designed to be light weight and easily operated making it easy to carry,

assemble and disassemble.

Screen Fabric: The screen fabric is attached to the rectangular frame and held in place by several press

studs, which ensure an evenly stretched and flat surface. The CineWhite (front projection) and WraithVeil

(rear projection) screen materials are durable and can be folded many times without causing damage or

distortion to the surface.

061616 www.elitescreens.com 1

Parts Diagram

Fig. 5

A. Folding frame x1

D. Projection screen material x1

G. Rope x2

B. Left and right folding legs x2

E. Knob screw x2

H. Carrying Bag x1

C. Screen material bag x1

Note: The parts list above is subject to change without notice.

Correct usage of the projection screen will ensure better viewing results.

For front projection, assemble and view the screen as indicated in Fig.1.

For rear projection, assemble and view the screen as indicated in Fig.2.

F. Eyebolt x2

I. Stake x4

Frame Assembly and Screen Material Attachment

1. Take the folding frame (A) out of the carrying bag (H) and place it on a flat surface. Unfold the longer sections

first as shown in Fig.3-4.

2. Unfold the frame until the latch on the hinge "clicks" into place. Repeat the procedure for the shorter sections.

(Fig. 5-6)

Fig. 3 Fig. 4

Fig. 6

061616 www.elitescreens.com 2