Manually operated (non-motorized) retractable front projection screen with integrated
mounting solutions allowing it to be installed on the wall or ceiling suspended. The
Manual Screen is for commercial or residential front projection presentations. It is an
ultra affordable, high performance, manual pull-down projection screen.
1.2 How does it work?
The manual screen utilizes a spring loaded auto-locking system for variable height
adjustments. Pulling the lanyard or center handle brings down the screen material to the
desired height. Gently stopping on the downward pull and guiding the material as it rises
a few inches into its locked position. A gentle pull on the center handle or lanyard will
cause the locking mechanism to disengage allowing the spring loaded retraction
mechanism to draw the screen back up into the casing.
Section 2: Product Features .
2.1 Characteristics
Screen Material
• MaxWhite™ B screen material is durable and easy to clean
• 4K Ultra HD and Active 3D ready
• 180° wide viewing angle for commercial presentations or residential home cinema
• Black backed screen material eliminates light penetration for superior color reproduction
• Standard 4-side black masking borders
Design and Installation
• Available in 100” diagonal sizes in 1:1, 4:3, 16:9, and 16:10 aspect ratio, 120” diagonal in
4:3, 16:9, and 16:10, and 135” diagonal in 4:3 ad 16:9
• Screen lanyard for easy operation included – allows screen’s pull down handle to be
reached from high areas
• Dual wall and ceiling installation design
• Optional 6” and 12” L brackets available
• 2-year warranty
2.2 Certifications
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
1
Page 2
PRODUCT WHITE PAPER
http://www.elitescreens.com
2.3 Model Numbers
Model
Number
M100S 100" 1:1 71.0 71.0 MaxWhite B 1.0 White 12.2 14.5 89.0" x 4.7" x4.7"
M100V 100" 4:3 60.0 80.0 MaxWhite B 1.0 White 12.3 15.0 96.0"x 4.7" x 4.7"
M100H 100" 16:9 49.0 87.0 MaxWhite B 1.0 White 10.6 13.0 79.2" x 4.7" x 4.7"
M100X 100" 16:10 53.0 84.5 MaxWhite B 1.0 White 11.8 14.4 93.6"X4.7"X4.5"
M120V 120" 4:3 72.0 96.0 MaxWhite B 1.0 Black 21.6 25.4 114.7"x5.5"x5.5"
M120H 120" 16:9 58.8 104.6 MaxWhite B 1.0 Black 21.7 25.7 112.0"X5.5"X5.5"
M120X 120" 16:10 63.6 101.8 MaxWhite B 1.0 Black 21.4 24.7 106.1"x5.5"x5.5"
M135V 135” 4:3 81.0 108.0 MaxWhite B 1.0 White 30.3 37.6 118.0"x6.5"x6.0"
Diagonal
Size
Aspect
Ratio
View
Height
(in)
View
Width
(in)
Screen
Material
Gain
Case
Color
Net
Weight
(lbs)
Gross
Weight
(lbs)
Packaging Dimensions
(LxHxW)
M135H 135” 16:9 66.2 117.2 MaxWhite B 1.0 Black 32.1 41.4 128.0"x6.3"x6.0"
Section 3: Screen Material Specifications .
3.1 Characteristics
Elite’s MaxWhite™ B material is a matte white
material formulated to meet our conventional
screens that delivers optimal picture quality. Its
neutral 1.0 gain allows for the widest possible
viewing angles of 180° (90° Left and Right). The
matte surface of the MaxWhite™ B offers superb
diffusion uniformity while delivering radiant
image and color reproduction. The screen surface
has black-backing to avoid light penetration and
can be cleaned safely with mild soap and water.
• Surface can be cleaned with soap, water and a soft cloth
• Multi-Layer Weave and Textured
• Surface Coating
• Mildew Resistance
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
2
Page 3
PRODUCT WHITE PAPER
Specifications
Thickness
0.36 mm
Weight
350 g/m2
Maximum Height
3.2 M (10 ft)
On-axis Gain
1.0
Half-Gain Angle
Does not reach half gain
Ceiling Installation
Wall Installation
http://www.elitescreens.com
3.2 Gain and Viewing Angle Chart
Section 4: Execution .
4.1 Installation Methods
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
3
Page 4
PRODUCT WHITE PAPER
Side view
http://www.elitescreens.com
Flush Wall Installation
1. Measure the distance of the keyholes on the end caps and mark the location of where
the screen is to be installed for the pre-drilled hole.
2. After marking the area and drilling the hole, insert the proper screw into the drilled
hole and leave about 1/8” of an inch from the wall to mount the screen.
3. Mount your screen from the keyhole located on back of screen’s left and right end caps.
Note: Do not remove the end caps to mount the screen to the wall.
Removing the end caps will release the tension of the internal spring mechanism.
U-bolts included with Manual B series for hanging from the
ceiling using chains and S-hooks. (Chains and S-hooks not
included)
Keyhole located on
back of end cap.
Note: No hardware is included with this screen for installation. For wall mounting in to drywall, drywall
anchors and screws will suffice to sustain the weight of this screen. For any other type of wall mounting,
please consult with your local hardware store to obtain the proper hardware.
Ceiling Installation
Screen Operation
1. Pull the screen down from the lanyard or from the handle only
ata 90-degree angle. The screen is designed to lock at 2 inch
intervals. To achieve this, make sure to pull straight down and
allowing the screen to come up to lock into place. Do not attempt
to pull the screen down by the surface or touch the screen, as it
will damage the screen and void the warranty.
2. To retract the screen, simply pull the screen down more than 2
inches with a quick snap of the wrist and guide it back up in to the
housing without releasing the handle.
Attention: When retracting, always pull the screen down at a 90-degree
angle and do not let go until the screen is entirely inside the housing. If ever the screen feels stuck, keep in mind
that the screen’s mechanism is new and needs to be run up/down a few times to loosen up. If this happens,
carefully, with a little force, yank the screen straight down to unlock the mechanism.
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
4
Page 5
PRODUCT WHITE PAPER
Models: 100
”-120”
D-ring
Front view
of screw holes
Example shown is the end cap
for the 100”
– 120” models.
Models: 135
” and above*
http://www.elitescreens.com
4.2 R-TYPE Installation Methods
A. Flush Wall Installation
1. Measure the distance of the keyholes on the end caps and mark the location of where
the screen is to be installed for the pre-drilled hole.
2. After marking the area and drilling the hole, insert the proper screw into the drilled
hole and leave about 1/8 of an inch from the wall to mount the screen.
3. Mount your screen from the keyhole located on the back of the screen’s left and right end
caps.
B. Flush Ceiling Mounting (only for models 135” and above)
Keyhole located on
back of end cap
1. Measure the distance between the top screw holes located on the top of the end caps.
2. Mark the location of where the screen is to be installed for the pre-drilled hole.
3. Drill your hole, use a hollow wall anchor if needed
4. Insert the proper screw into the drilled hole and secure the screen to the ceiling.
C. Suspended Ceiling Installation(for models 100”-120”)
1. You can hang the screen from the ceiling by using
chains (not included) and hooking them to the D-ring
loops on models 100”-120”, which are located on each end
of the end cap.
For models 135”- and above, D-ring or U-bolts (not
included) are required to create loops for hanging the
screen with chains from theend caps’ flanges.
Note: Please consult with a hardware store professional for
proper screws for your specific wall or ceiling installation.
The installer must ensure that proper mounting hardware and
fasteners used are of adequate strength and suitable for the mounting surface.
Side view
Flange with a pair
*U-bolts and D-ring not included.
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
5
Page 6
PRODUCT WHITE PAPER
Weight
Unit: Inches
Unit: mm
M120X
120" 2761
2585
2661
2741
1907
1615
114 1812
62
2731
38 38
http://www.elitescreens.com
Screen Operation
1. Pull the screen down from the lanyard or from the handle only at
a 90-degree angle. The screen is designed to lock at 2 inch intervals.
To achieve this, make sure to pull straight down and allowing the
screen to come up to lock into place. Do not attempt to pull the
screen down by the surface or touch the screen, as it will
damage the screen and void the warranty.
2. To retract the screen, simply pull the screen down more than two
inches with a quick snap of the wrist and guide it back up in to the
housing without releasing the handle.
Attention: When retracting, always pull the screen down at a 90-degree
angle and do not let go until the screen is entirely inside the housing. If ever the screen feels stuck, keep in mind
that the screen’s mechanism is new and needs to be run up/down a few times to loosen up. If this happens,
carefully, with a little force, yank the screen straight down to unlock the mechanism.
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
9
Page 10
PRODUCT WHITE PAPER
http://www.elitescreens.com
5.5 Pictures
Manual B Series White Casing – Closed
Casing Close Up of 100” and 120” models
Weight Bar Detail
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
10
Page 11
PRODUCT WHITE PAPER
http://www.elitescreens.com
Case Detail
Manual B Series Aspect Ratios
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
11
Page 12
PRODUCT WHITE PAPER
http://www.elitescreens.com
Manual B Series in Meeting Room
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
12
Page 13
PRODUCT WHITE PAPER
http://www.elitescreens.com
Life Style
Section 6: About Elite Screens .
6.1 Company Description
Elite Screens Inc. is a California based company that specializes in making quality commercial
and home-theater projection screens for the retail and custom install sales channels. Our
company began as an innovative venture into the projection market by manufacturing veterans
from the AV/IT industry. Elite Screens quickly established itself as an entry level commercial and
home theater screen manufacturer. This was accomplished by making a quality product cost
effective with a focus on mass-producing screen material, sizes and aspect ratios that were
most commonly preferred by AV customers in general. We focused on uniformity with what
would match the mainstream demographic while including extra features that are not usually
included by other manufacturers. In time, we progressed from just retail sales into the realm of
custom installer/integrator manufacture as our numerous reviews and awards will attest. We
stand behind our product and are so certain of customer satisfaction with the quality of our
product that we offer a 2-year manufacturer's warranty which is twice the industry standard.
In our continued devotion to excellence in products and service, we are committed to
implementing green practices with our production. We have adopted manufacturing methods
that promote conservative regulation of our energy needs. Our simple product designs
combined with the expertise of our permanent staff ensures that our entire line of products are
made by experienced hands devoted to the high standards of today’s audio-video consumer.
###
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
13
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.