Elite Screens Insta-RP2 User Manual

Self-Adhesive Rear Projection Screen Film

Insta-RP Screen Series

User’s Guide

Rev.022111-AS

www.elitescreens.com [e-mail]

1

Please make sure all parts listed below are included before proceeding with the installation.

Parts List

QTY

a. Insta-RP Screen Material

1

b. Microfiber cleaning cloth

1

c. Scraper

1

Parts List for Insta-RP Series

a. b. c.

Caution Notes:

1. This product is an adhesive rear-projection screen that can be applied to various surfaces such

as transparent glass or acrylic.

2. This product is made for one-time permanent application. It has a non-reusable adhesive film

that bonds firmly to a window surface. If the surface has any layer treatment such as tinting, it is
likely that the layering will be damaged upon removal of the material.

3. To ensure an even and “bubble –free” installation. Make sure that the window surface is clean

and evenly moistened previous to the installation.

4. Do not fold the Insta-RP material. Folding will result in a permanent crease that cannot be

removed.

5. Avoid touching the material with any hard or sharp objects that may cut scratch or otherwise

deface the screen.

6. The Insta-RP material is applied to a moist surface. This can impact the installation of the

material by possibly creating slight ripples or bubbles. These will disappear within the first few
weeks as the micro-droplets of water trapped in the adhesive evaporate.

Rev.022111-AS

www.elitescreens.com [e-mail]

2