Elite Screens Insta-DE User Manual

Parts List

QTY

a. Insta-DE Screen Material

1

b. Pen Holder

1

c. Double-sided tape

1

d. Whiteboard markers

2

e. Elite special high density eraser

2

f. 4.5mmx30mm Screw

1

Insta-DE Series

Soft-padded Dry-erase Whiteboard Projection Screen

User’s Guide

Product Features

 Award winning and GREENGUARD certified VersaWhite material.
 1.1 gain with 160 degree wide viewing angle.
 Special anti-scratch layer to ensure long use as a dry-erase

projection screen.

Application Advantages

 Instantly converts flat surfaces/walls into a dry-erase whiteboard projection screen.
 Includes dry-erase pens, eraser, and pen holder.
 Perfect dry-erase and projection solution for today's short throw projectors.
 Ideal and effective instructional presentation tool in the classroom, boardroom, and training

facilities.

What’s in the package Pad

Please make sure all parts listed below are included. If anything is missing please contact us immediately.

a. b. c. d. e. f.

Notes:

1. For best results and maximum product longevity, ONLY

use Elite Screens high density whiteboard Eraser

2. Please use a microfiber cloth and clean water to cleanse

the surface every 2-4 weeks to maintain a fresh and clean
projection surface.

Commercial use installation recommendation

If you would like your screen to have a professional-grade finish that is flat, durable, and free from imperfections

– Elite Screens strongly recommends hiring a professional wallpaper installer, and using a stronger adhesive

material such as Shur-Stik Heavy Duty Clay Wallcovering Adhesive. You can purchase this product easily online,
or consult with your wallpaper installer for other options.

020614-JA www.elitescreens.com 1

Pre-Installation Notice:

Wall

Tape strip
completely
removed

Double-sided tape

1. Make sure the surface of the wall has been properly patched, sanded, and primered.

2. Remove anything from the wall that may puncture the Insta-DE material.

3. Please consult with a professional wallpaper installer for further assistance. We strongly recommend

two or more people for this installation.

Installation

Watch the Installation video at: www.elitescreens.com/ide-install

1. Clean the location whe r e the Insta-DE Screen will be installed.

2. Measure and mark the top-right and bottom-right corner of the installation location

3. Apply double-sided film tape all around the edges of the Insta-DE back padding.

4. Then, apply vertical double-sided film tape from top to bottom every 3-4 inches.

5. Completely peel the first vertical tape strip and peel off a 1-inch length tape film at the top of the double-

side tape on the rest of the vertical strips.

6. Attach the Insta-DE Screen to the top-right and bottom-right corner of the location

020614-JA www.elitescreens.com 2