Elite Screens Home120IWH2-A, Home90IWH2-A, Home135HW2-A, Home150HW2-A, Home100IWH2 User Manual

Ez-Electric Screen

Elite Home series

Ver. 1.5

Users Guide

www.elitescreens.com/ [e-mail]

b

b

l

Accessory for Home series

①IR ②RF

Green

Red
+12V

④12V trigger

0V

⑤

Eye receiver

Please always point to the eye
receiver when using the IR remote

③Wall box

⑥Battery

⑦ Bu

le leve

www.elitescreens.com/ [e-mail]

t

b

t

t

Important Safety and

Warning Precautions

1. Be sure to read this manual before use and follow theprocedures specified:

☆

Please retain this manual for future reference.

☆

To avoid any damage, do not use any accessories not recommended by the manufacturer.

Handle the device carefully during transportation to avoid impact.

☆

Do not put the device on uneven or inclined surfaces.

☆
☆

Do not put heavy objects on the power cord; affix the power cord properly to avoid
someone tripping over it.

Never over load the power cord to prevent electrical shock or fire.

☆

Guard the device from any liquid or foreign object to avoid electrical shock or f ire due to

☆

loose contact or shor

2. If any accessories need to

circuit.

e replaced, be careful to avoid shortcircuit.

3. There are no user serviceable parts in the device. Nobody except authorized technicians can open
this device. To prevent the risk of electrical shock or fire, protect against moisture and rain.

Make sure tha

T he rating label on the product indicates the rated voltage.

Do not handle the power plug when your hands are wet or your feet are in contact with water.

the power source this device is connected to has a continuous power flow.

4. Do no

use this device under the following circumstances:

1) Disconnect the power cord under the condition of heavy wind, rain, thunder or lightning.

2) Avoid direct sunshine, rain shower or moisture.

3) Keep away from fire sources and high temperature to prevent this device from overheating.

4) Cut off the power supply first before transportation or maintenance.

www.elitescreens.com/ [e-mail]

W

NOT

E

t

t

p

arning

Individual mod ification s to this product are prohibited and will void the user’s warranty. Please
contact the Service Department for any questions.

This equipment has been tested and found to comply with the limits for a Class B digital device,

These limits are designed to provide reasonable protection against harmful interference in a
residential installat ion. This eq uipment generates uses a nd can radiate radio frequency energy and ,
if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.

:

ursuant to Part 15 of the FCC Rules.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

To ensure safe and reliable operation, direct connection to a properly grounded power source is advised.

The power outle

 Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

 Consul

supplying power to the unit shouldbe close to the unit and easily accessible.

the dealer or an experienced radio/TV technician for help.

www.elitescreens.com/ [e-mail]

r

②

Connection

inside of case

pins

1. 12V Trigger

:

12V trigger for your new Elite Home2

-----allows your screen to synchronize its drop and rise
with the projectors power cycle. The screen drops when
the projector powers up and retracts when the projector
powers down.

To Projector

Video Projection Interface

Red DC12V

Green

0V

2. IR (Infrared) Wall Box Kit and Eye Receiver: The Wall Box Kit contains an IR receiver and enables the

consumer to use either the IR remote or hard wire controls to operate the screens drop/rise capabilities. The IR eye
protrudes from the bottom of the casing to present a low profile line-of-sight control option for your IR remote. It is a low­visibility alternative to using the wall box kit and its ability to protrude from the bottom of the screen, allows line-of-sight
control even in a recessed ceiling installation.

Connectionpins

of

inside

case

Connectionpins

of

case

inside

Senso

Wall- mounted Receiver
(Extension Sensor)

Transmitter

Sensor

3. Bubble Level: Included with the installation package is a small bubble level that can be useful in

determining if the screen is perfectly level when installing.

Bubble

NOTE: ① Please use the Down sign side as the bottom.

The Bubble should be in the middle position to determine that it is level.

www.elitescreens.com/ [e-mail]

P

A

lease read this guide prior to installation.

●Make sure the current rating is equal to that of the appliance rating when an extension cord is used.

●Do not use any accessories not provided by the manufacturer with this screen. We will not be responsible for any

risks of fire, electric shock, or injuries resulting from the misuse of this product with accessories not designed for it.

●Make sure the screen is mounted in a horizontal level. We suggest consulting with a professional if you are unsure on
how to perform a proper installation.

INSTALLATION
MOUNTING INSTALLATION

Wall Mounted Ceiling Mounted Ceiling Recessed Mounted

*

I. Masonry Anchors are used on concrete/masonry wall/ceilings; Plastic drywall anchors are included for drywall mounting

II. Wood screws are to be used for wooden wall/ceiling studs on screen sizes less than or equal to 120 inches (diagonal).
Masonry anchors should be used for wall/ceiling installations of screen sizes greater than 120 inches (diagonal).

III. Install the Aluminum Extruded Hanger Set onto the slide channel and move to the desired position before locking
it by tightening the connecting bolt.

MOUN T IN G ACCE SS OR I

ES

llow 2” of spacing between the front and back of the screen casing.

Upon assembly thebracket will slide into
the casing rails for mounting.

A

B

C

A

Warning: Standard screws x 2 for each ty pe

B

C

D

D

These are standard accessories included with the ceiling/wall brackets. Models may vary
and anchors will not support all models.

www.elitescreens.com/ [e-mail]

R

The IR receiver will be connected from the screen

8 0m m i n w id th

The 3 prong cable will be
connected from the outlet to

11.65 mm. in width

the case.

Although the IR remote requires a direct line of sight with the IR sensor to
function, case can be hidden from sight and operated using the RF remote.
When depressing the directional buttons you should hear a faint click
signifying that the mechanism is working properly.

I

UP

Stop

RF

Down

This is the IR (Infra-Red) remote with a

range of 15 Ft. Battery size AAA

** Please remember to always point to the infra-redreceiver when using the IR remote. The IR remote can also workwith
a Universal Learning Remote Control usually by programming the Screens IR codes in your Universal Learning Remote.

www.elitescreens.com/ [e-mail]

This is the RF (Radio Frequency) remote

with a range of 30 Ft. Battery size AAA

N

m

p

d

1. Q: Why does my screen no longer function?

A: There are a few

A.) Make sure your wall plug has power and that the screen is properly plugged in.

B.) Please check the fuse to y our screen. (Call Tech support for location of fuse)

C.) If screen works well with the line switch but not with the remote control, make sure the remote control has goo
batteries in it.

ossible things you could check:

D.) Our electric screens with a tubular motor installed are equipped with a Thermal relay. This would
include all Home (2, 3), Tension (1, 2, 3) series, and VMAX screens with a diagonal size above 180". This
feature will automatically shut off screen in the event the motor becomes too hot, preventing overheating of
the motor. To correct this, let screen alone for 10-15 minutes and try again.

2. Q: How is the screen material cleaned?

A: The screen material can be cleaned with mild soap and water.

3. Q: What type of batteries do the remote controls require?
A: The IR and RF remote controls use AAA alkaline batteries

4. Q: Can you manually pull down the screen?
A: No, manually pulling down the screen will damage the electronic motor rolling system.

5. Q: How could I setup my Screens IR receiver to work with my learning remote control system? Do you have any IR
codes I can use to achieve this?

A: Our IR remote controls have been evaluated and entered in to the databases of some Universal remote control

manufacturers. Please contact the manufacturer of your remote to inquire about your remotes ability to function with
ours. If they have not evaluated our remote control then the following list of Binary codes will be used for most remote
setups.

For Spectrum, VMAX2 (Plus), Home2(3) and Tension2(3) Series
Up: 1111 0000 0001
Stop: 1111 0000 0010
Down: 1111 0000 0100

6. Q: What is the gain on the matte white screen material?

A: The matte white material has a gain of 1.1. For detailed specs, info please check our web-site for more detail

ote: For more Updated FAQ, please visit www.elitescreens.co

www.elitescreens.com/ [e-mail]

p

Two (2) year warranty parts and labor from purchase date as follows (except for refurbished units
as specified below):
Refurbished units carry a 90-day parts and labor warranty.
Demo units or open box items are AS IS items and do not carry a warranty.
Each party will be responsible for one way shipping during the warranty period.
DOA (Defective On Arrival): Must be reported within 7 business days of receipt. An RMA
(Return Merchandise Authorization) number must be issued in order to process a replacement.
Elite Screens will replace the DOA (Defective On Arrival) unit with a brand new replacement
*(see exceptions below) after the DOA unit is received and/or confirmed defective. Once the

roduct is received, Elite Screens will send out a new* unit to the customer by ground service
(based on stock availability). Should a problem be reported after the 7-day grace period, the item
must be shipped to us for warranty repair.
Missing Parts must be reported within the 7-day (DOA) grace period. If reported after 7 days,
customer will be only responsible for shipping and handling fees. If reported after 30 days of
receipt, customer is responsible for cost of the parts and shipping & handling fees.

*A new or refurbished replacement will be sent out to the customer depending on the type of purchase (new or
refurbished) or based on stock availability.

Please do not return any unauthorized items to Elite Screens, as they will be refused.

The RMA number must be included on the outside label of your shipping box and shipping documents. Our
warehouse is not authorized to accept returns without an RMA number on the shipping label. RMA numbers are
valid for 45 days from the date of issue.

● All shipping damages must be reported within 7 business days upon receipt of the Product. After 7 days Customer is
responsible for all incurred costs

● Inspect all shipments upon arrival. If damage or loss is apparent upon delivery do not accept the shipment until you
make a notation of the damage on all copies of the carrier's delivery receipt and have the driver sign all copies to
acknowledge the damage. Do not sign a clear receipt for damaged or missing items or there will be no basis for a
claim. Ask the carrier to make a detailed inspection of the damage. File a claim with the carrier. Cooperate and
follow up as necessary to secure final settlement

● Immediately advise Elite Screens of all damages or problems. Do not return merchandise to Elite Screens. File your
claim with the carrier enclosing copies of the bill of lading (signed by the driver) and inspection report as support. Keep
all packing materials and boxes with the damaged product. DO NOT throw any thing away. Although Elite Screens will
provide any assistance possible we can not be responsible for the actual filing of claims on the carrier or accept liability
for non-collectable freight claims

For Warranty and Service requests please fill out a RMA /Service Form at:

http://www.elitescreens.com/service_form.htm

Please Visit this link for full Warranty information:
http://www.elitescreens.com/service.htm

For Customer Service and Technical questions, please contact Elite Screens at:
Telephone: [phone] Fax: [phone]

.

www.elitescreens.com/ [e-mail]

__

___ _ _ _ _ ____

y

_

___

____

____

____

____

____

__

____

____

___

_

____

____

__

_

_

____

____

_

__ ____

_

____

__

____

_ ____

___

_

_

_ _ _ _ ____

___

pp

___

__

_ _

___

_ _

__

_

y

_

_ _

___

__

_

y

Two ways to register your warranty with Elite Screens Inc.

A. On Line (F aster and Easier) www.elitescreens.com/register.htm
B. Fill out & Fax to [phone], Attn: Customer Service Dept.
*Your Name:
Address:
Cit

/State/Zip:

*Email Address:
*Phone: _ _
*Screen Model:

*Serial Number:
*Date of Purchase:
*Dealer/Reseller Purchased from (name of the reseller):
What is your Projector Model:

_

_

_ _

_ _ _ _

_ _ _ _

_ _ _ _

_ _ _ _

_ _ _ _

_ _ _

_ _ _ _

_ _ _ _

_ _ __

_ _ _

_ _ _

_ _

_ _ _ _

_ _ _

_

A

lication:

How would

Comments:

If

ou have pictures of your screen you'd like to share with us, please email your pictures to:

For any technical inquiries, please email to:
[e-mail]

For any warranty claim inquires, please email to:
[e-mail]

Home __ _ Education

Others

ou rate this screen?

or 877-511-1211 Customer Service Div.

or 877-511-1211 Customer Service Div.

Corporation

Excellent

[e-mail]

Or call us at 877-511-1211 Sales and

Good _ _ Ok

Marketing Div.

Government

Improvement needed

www.elitescreens.com/ [e-mail]

www.elitescreens.com/ [e-mail]