Elite Screens Elite Home User Manual
Ez-Electric Screen
Elite Home series
Ver. 1.5
Users Guide
www.elitescreens.com/ eliteinfo@elitescreens.com
b
b
l
Accessory for Home series
①IR ②RF
Green
Red
+12V
④12V trigger
0V
⑤
Eye receiver
Please always point to the eye
receiver when using the IR remote
③Wall box
⑥Battery
⑦ Bu
le leve
www.elitescreens.com/ eliteinfo@elitescreens.com
t
b
t
t
Important Safety and
Warning Precautions
1. Be sure to read this manual before use and follow theprocedures specified:
☆
Please retain this manual for future reference.
☆
To avoid any damage, do not use any accessories not recommended by the manufacturer.
Handle the device carefully during transportation to avoid impact.
☆
Do not put the device on uneven or inclined surfaces.
☆
☆
Do not put heavy objects on the power cord; affix the power cord properly to avoid
someone tripping over it.
Never over load the power cord to prevent electrical shock or fire.
☆
Guard the device from any liquid or foreign object to avoid electrical shock or f ire due to
☆
loose contact or shor
2. If any accessories need to
circuit.
e replaced, be careful to avoid shortcircuit.
3. There are no user serviceable parts in the device. Nobody except authorized technicians can open
this device. To prevent the risk of electrical shock or fire, protect against moisture and rain.
Make sure tha
T he rating label on the product indicates the rated voltage.
Do not handle the power plug when your hands are wet or your feet are in contact with water.
the power source this device is connected to has a continuous power flow.
4. Do no
use this device under the following circumstances:
1) Disconnect the power cord under the condition of heavy wind, rain, thunder or lightning.
2) Avoid direct sunshine, rain shower or moisture.
3) Keep away from fire sources and high temperature to prevent this device from overheating.
4) Cut off the power supply first before transportation or maintenance.
www.elitescreens.com/ eliteinfo@elitescreens.com
W
NOT
E
t
t
p
arning
Individual mod ification s to this product are prohibited and will void the user’s warranty. Please
contact the Service Department for any questions.
This equipment has been tested and found to comply with the limits for a Class B digital device,
These limits are designed to provide reasonable protection against harmful interference in a
residential installat ion. This eq uipment generates uses a nd can radiate radio frequency energy and ,
if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
:
ursuant to Part 15 of the FCC Rules.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
To ensure safe and reliable operation, direct connection to a properly grounded power source is advised.
The power outle
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consul
supplying power to the unit shouldbe close to the unit and easily accessible.
the dealer or an experienced radio/TV technician for help.
www.elitescreens.com/ eliteinfo@elitescreens.com
Loading...