Elite Screens ChromaFlux User Manual
User Guide
Elite Screens Inc | Elite Screens China Corp. | Elite Screens Europe GMBH | Elite Screens France S.A.S | Elite Screens Taiwan Ltd. | Elite Screens Japan Corp.
Table of Contents
I. Roller-type instructions .................................................................................. 1
• Product Specifications ...................................................................... 6
II. Spray-related instructions ............................................................................. 7
• Product Specifications ...................................................................... 10
III. Diffusion layer coatings ................................................................................. 12
• Product Specifications ...................................................................... 14
Contact Information:
Contact information and product-related information should be directed to the Web site the query, you will get the most
complete information content.
www.elitescreens.com/chromaflux
Warranty
A. Elite Screens Inc provides a standard 2 year warranty for ChromaFlux Screen Paints
B. Elite Screens Inc does not assume any responsibility if application procedures and/or methods are not followed
according to the user guide
C. Elite Screens Inc is not responsible for any damage during shipping or any other responsibility besides the product itself
D. If any damages and/or unusual sediments are found, contact Elite Screens immediately
E. Any product that is determined to be defective will be replaced
F. Upon verification of a genuine Elite Screens Inc ChromaFlux product, Elite Screens reserves the right to decline
product replacement and/or product service
G. Elite Screens has the exclusive right to further explain this warranty and other associated product documentations
I. Roller-type Instructions
1. Uses
A. Allows theater-level 3D to be enjoyed in the comfort of your own home
2. Applications
A. DIY home-theaters
B. Professional/commercial
3. Instructions for the Roller-type paint
A. Prepare the following items:
Item Article Notes
1. Paint stirring stick
2. Roller We recommend using synthetic covers
3. Paint tray
4. Linen gloves
5. Masks
6. Low-adhesive painters tape For borders and details
7. Masking film Use liberally to avoid spills and drips
8. Long-sleeve protective clothing Unwanted clothing in case of stains
9. Dry-wall putty if the wall is not flat when preparing
10. Dry-wall knife If the wall is not flat when preparing
11. Latex-primer
12. Sandpaper 500 grit
B. Make sure the area is well ventilated. Keep windows open if present.
C. Check to see that the surface is not deteriorating and that cracks are not present.
(This will drastically affect the image quality)
D. If the surface is not uniformly smooth, apply dry-wall mud and smoothen it with a dry-wall
knife.
E. Sand the surface with 500-grit sandpaper.
F. A clean, free-of-dust surface is desired, so, using a clean, damp cloth, wipe the sanded
area until dust is completely removed.
(Wait for the surface to dry completely)
G. While waiting for the surface to dry, you can use this time to cover nearby furniture and
belongings with cardboard, newspaper or masking film to avoid unwanted spills.
H. Using masking tape, tape off the border of the desired size and shape of your projection
screen.
(Suggestion: Using your projector, project an image onto the surface. Aim, zoom and
focus the image until the desired size and location is obtained. Mask the outside
perimeter of this image.)
I. Apply appropriate primer and let dry
- 1 -
www.elitescreens.com/chromaux
I. Roller-type Instructions (continued)
I. Put on protective gear: gloves, mask, and long-sleeve clothing.
J. Open the paint, and, using the paint stirring stick, stir the paint for 3-5 minutes.
(If there is a separation of the paint and its pigment, there is no need to worry as this is
normal. Stirring will greatly reduce the amount of separation.)
K. If this is your first time using ChromaFlux, we recommend that you take the time to
become familiar with the equipment and paint. Find a scrap piece of cardboard or
plywood and test to learn the consistency of the paint.
L. Use your gloves to sweep off the any lint or excess threads off of your roller cover, and
then place the roller cover onto your roller.
M. Pour the paint into a paint bucket or tray.
- 2 -
www.elitescreens.com/chromaux
I. Roller-type Instructions (continued)
N. Immerse the roller into the paint. Using either a filter or tray, roll the brush back and forth in
an attempt to get the paint as evenly spread on the cover as possible.
O. Brush the first coat horizontally from left to right. Wait about 5-10 minutes before applying
the second coat vertically from top to bottom. Use uniform pressure and speed while
rolling the paint.
P. After 30 minutes, remove the painters tape.
(In order to avoid the deterioration of the painters tape, do not wait longer than 8 hours
to remove.)
Q. Paint will take 12 hours to dry completely; however, the solvents will take 3-5 days to set in
a ventilated environment.
R. After completion, discard any newspaper, film or cardboard used to shield furniture, walls,
or appliances.
- 3 -
www.elitescreens.com/chromaux
I. Roller-type Instructions (continued)
S. If there is leftover paint after the project, pour it back into the can and close tightly. Keep
this away from excess heat and sources of ignition. This can be used for repair within the
next 6 months.
4. Safety Precautions:
A. This product is flammable and should be kept away from sources of ignition. Please store
this in a dry, cool place. Do not smoke near this product during application or storage.
B. Please ensure that the area of application is well-ventilated. In conditions, such as
basements, measures to strengthen air circulation should be taken.
C. It is recommended to wear glove, mask and protective clothing to avoid excess contact
and inhalation of this paint.
D. If this product makes contact with eyes, rinse immediately with water and contact a
physician immediately.
E. Keep out of reach of children.
F. The use of this product will produce strong odors. These odors should gradually dissipate
within 3-5 days.
G. If ingested, do not induce vomiting. Drink and gargle large amounts of water and
contact a physician immediately.
H. If in the course of using this product an allergic reaction should occur, discontinue the use
of the product and contact a physician immediately.
I. Avoid the puncturing of this products container.
J. For more details, please refer to the ChromaFlux Material Data Safety Sheet.
- 4 -
www.elitescreens.com/chromaux
Loading...