Elite Prime Vision Peregrine A4k series, Special Edition A4K series User Manual

Acoustically Transparent

Important Safety and Warning Precautions

carefully to ensure proper maintenance and safe

Frame Screen

nging the screen up, please

furniture, ladders, windows, etc., occupy the s

2. Regardless if the screen is hung on or installed into the wall;

ight is supported appropriately by a strong and structurally sound surface

e should.

nt speci

ade of high quality velo

er the screen with a fur

hen cleaning, use a soft cloth moistened with w

pt to use any solutions, che

maging the screen, avoid touching it directly with your fingers,

f reach of small childre

de of high

ater to

een material, never attem

een itself, and never attem

Fixed Frame Projection Screen

& Special Edition A4K

such as power switches, outlets,

e screen.

he proper

inum and should be handled with care.

rom dirt, gri

arks on the fra

u

ousehold sa

inum alloy and should be handled

een material surface.

t to use any solutions, chemicals, or abrasive

th your fingers or sharps/abrasive

Peregrine A4k

Please follow these instructions

Acoustically Transparent Fixed

1. When ha

are used and that the we

large and heavy picture fram

(Please consult a home improveme

3. Frame parts are m

4. When not in use, cov

User’s Guide

make sure that no other objects –

pace designated for your Fixed-Fram

make sure that t

alist for the best advice on installation.)

ur-surfaced alum

niture sheet to protect it f

Series

ty with your

mounting anchors

just as any

me, paint, or any other

impurities.

5. W

surface.

6. Never attem

7. In order to avoid da

other sharp or abrasive objects.

8. Spare parts should be placed out o

CAUTION:

The projection screen frame is ma

Use a soft cloth with warm w

To avoid damaging the scr

cleaners on the scr

objects.

arm water to remove any m

micals, or abrasive cleaners on the screen s

n in accordance with h

-quality alum

remove any spots on the scr

p

pt to touch the screen wi

me or screen

rface.

wri tin g tools, or any

fety guidelines.

with care.

Push

PARTS LIST

1. Frame Parts x 6 pcs

(4 top/bottom frame pcs. + 2 side frame pcs)

9. M5x15Screws x 16 pcs

2. Tension Rods x 6 pcs

(4 top/bottom rods + 2 side rods)

10. User Guide x 1 pc

11. Center Support Bar x 1 – 2 pcs

3. Screen Material x 1 pc

(depending on model/size)

12. Support joiner x 2 – 4 pcs

4. Center joints x 2 pcs

5. Elbow Joints x 4pcs

6. Wall brackets x 2-4pcs

7. Wood Screws x 8pcs

8. Drywall anchors x 8pcs

(depending on model/size)

13. Fix Plates x 50 – 90 pcs

(depending on model/size)

14. Rubber hammer (mallet) x 1 pc

15. Screw driver x 1 pc

Note: Please make sure all parts are included in your package before proceeding to assemble your Elite
Screens fixed frame projection screen.

ASSEMBLING THE FRAME

1. Insert the center joint connector to the horizontal frame piece and then fasten it with 2screws.

2. Insert the other horizontal frame piece to the center joint connector and then fasten it with 2 screws.

Make sure the frame piece lines up correctly before you tighten the screws completely.

Rev.082416-MZ 0 www.EPVscreens.com

1/2Long frame

3. Insert both elbow joint connectors into the long horizontal frame (fig.1).

Push

Long frame

Push

Joint

M5×15 Screws

4. Join all four frame parts together following the steps showed below. After making sure that all four corners join

at right angles to form a perfect rectangle, fasten the four angles together by using the (x8) joint screws

included (fig.2).

Push

Short frame

( fig.1)

Push

Short frame

Push

Insert the exposed ends of the joint connectors
into the short (vertical) frame and align the four
corners so that they meet at perfect right angles

M5×15 screws

Push

Rev.082416-MZ 1 www.EPVscreens.com