Elite Prime Vision EDGE FREE Dark Star eFinity Series, EDGE FREE Dark Star eFinity 9 User Manual

JA08292018 www.epvscreens.com U-00121 1

Dark Star eFinity Series

EDGE FREE® Ambient Light Rejecting Fixed Frame Screen

USER’S GUIDE

Congratulations on your new Dark Star eFinity purchase! The screen material included is our ISF certified
Dark Star 9 which is a reference quality front projection material, precisely formulated for environments with
minimal control over room lighting. It was designed to enhance picture brightness, offer accurate color fidelity,
and improve contrast levels. The Dark Star 9 is best for family rooms, educational facilities, conference rooms
or any applications in which incident light is a factor.

Cautionary notice for the Dark Star 9 material

The Dark Star 9 Screen material is composed of high quality sensitive multi-layer projection material. Please
follow the precautions below for proper care procedures and to prolong the life of your screen.
Failure to use [these safeguards] will result in voiding your warranty

1. Avoid using any chemical compounds or harsh abrasives which will result in permanently damaging the
screen material.

2. Use only a soft microfiber cloth with mild soap and water to clean the screen material.

3. Please wear a pair of clean, powder-free glove in the process of installing and operating the screen to keep
hand oil and dirt from being transferred to the viewing surface.

4. Be very careful when unrolling and handling the material. Lay the material flat only to avoid permanently
creasing the material.

5. Do not rub the cloth with force when cleaning to avoid permanently scratching the surface.

6. Do not touch the screen surface with sharp objects or allow the screen surface to come in contact with
anything other than the frame.

7. Use only a soft feathered brush to remove dust.

8. Dark Star 9 material damaged in handling, installation, or use is not covered under warranty.

JA08292018 www.epvscreens.com U-00121 2

1. Frame and Edge Trim Parts List

Qty

item

2 pcs

Main Frame Parts

Qty

item

2 pcs

Edge Trim Parts

Part

A.

vertical frame

Part

D.

Part

B.

½ horizontal frame

Part

E.

Part

C.

½ horizontal frame

Part

F.

2. Hardware Parts List

a.

b.

c.

d.

e.

f.

g.

h.

i

j.

k.

l.

m.

n.

E.

E.

F.

F.

D.

D.

A.

A.

B.

B.

C.

C.

JA08292018 www.epvscreens.com U-00121 3

Frame Assembly

Step 1: Place the soft padded EPE sponge on clean area on the ground where the screen will be assembled.
Step 2: Position the pieces of the frame on the EPE sponge in the arrangement shown below

Step 3: Remove the tape on all frame ends before assembling the frame.

Step 4: Insert the center joint (a) connectors into one-half of the horizontal frame (b/c) and secure with the

M4x6 screws (c).

Item

Parts List Qty

EF108H-DS9

EF124H-DS9

EF158C-DS9

a.

Center Joints (1)

4 4 4

b.

Elbow Joints (2)

8 8 8

c.

M4x6 Screws

60

60

60

d.

Spring Hook

2 2 2

e.

Spring

96

116

132

f.

Top wall brackets

2 2 2

g.

Φ5x50 Wall Screws

6 6 6

h.

Hollow Wall anchors

6 6 6

i.

Bottom wall brackets

2 2 2

j.

Angle cover

4 4 4

k.

LED light strip clip

8 8 8

l.

Center Support Bar

1 1 2

m.

white gloves

2 2 2

n.

rods

6 6 6