ELITEGROUP COMPUTER SYSTEMS TE70SA3 Users Manual

Quick Start Guide
For Android Tablet
TE70SA3
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
1
RF Exposure Information (SAR)
This device meets the government’s requirem ents for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power le vel in different channels.
The highest SAR value for the device as reported to the FCC is
1.39 W/kg when placed next to the body.
CAUTION
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
Attention: Teachers, Parents and Adult Supervisors
This product is an educational tool designed for school children, ages 6 and up. There must be supervision by an adult on school children under 10 when using this tablet. It is a must to have a thorough explanation to students on safe and proper handling of the tablet, power supply, battery pack, and power cord.
2
Be sure to keep the power cord away from younger children
Please ensure that students understand the following:
As with all electrical products, precautions should be
observed during handling and use to prevent electric shock. The power supply (adapter) should not be handled by the children.”
Emphasize to students that this device is an educational
tool and not a toy. The tablet, power supply, battery pack or power cord should not be dropped, crushed, stepped on or otherwise abused.
Ensure students understand the safe and proper
handling of power cord and power suppl y. Misuse could result in serious injury.
T he teacher, parent or adult supervisor should
periodically inspect the tablet; power supply and power cord for damage and replace it, if necessary.
Students should report any damage or loose parts to their
teacher, parents or adult supervisor, immediately.
Do not leave the tablet plugged in or “on” when enclosed
in a non-vented container, such as a school backpack, as overheating may occur.
It is recommended that students should take a 5-minute
break every 30 minutes of use.
3
Safety Precautions
The following are lists of precautionar y measure the students must understand before using this tablet inside the classroom or home environment:
1. Do not place near t he fire or o ther sourc es of heat.
2. Do not expose to magnetic fi elds.
3. Do not expose to dir ec t sunli ght.
4. Do not expose to rai n or m ois ture.
5. Do not place heavy obje cts t o a dd heavy pressur e on t he tablet.
6. Do not drop the tab let.
4
Package contents
Carefully unpack your box and take out the items listed below. If any of the items are missing or damaged, please contact your dealer immediately:
• One tablet • One AC adapter
• One USB cable • This guide
5
Tablet layout
No.
1 Power lock button 4 Touchscreen
2 Volume up/down 5 Microphone
3 Front facing camera
Name No.
Name
6
No.
1 Volume up/down 4 Speaker
2 Power lock button 5 Headphone jack
3 Rear facing camera 4 Micro USB 2.0/DC-in
Name No.
Name
7
Charging your tablet
If your tablet is just being unpacked from the box, you need to charge the tablet first. It will take around 4 to 5 hours to be fully charged.
1. Place your tablet with the screen facing up, and the
provided USB cable.
2. Plug the USB
head of the
cable into the
adapter, and
the micro-USB
head of the
cable into the
micro-USB
port on your
tablet.
3. Plug the
adapter into a
wall-socket.
8
Powering ON/OFF your tablet
To power on your tablet
Press and hold the power button down until the screen
turn on.
To power off your tablet
To turn off your tablet, follow these steps:
1. Press and hold the Power Lock button.
2. Touch Power off from the menu as shown below..
3. Touch OK to power down your tablet.
9
Specifications
Processor
Memory
Storage
Wireless
LCD
Touchscreen
Camera
Battery
Input/Output
Speaker & Mic
Intel® AtomTM DC  1.x GHz, 64bit
DDR3- 1600 1 GB eMMC v4.4.1 8 GB Wi-Fi 802.11 b/g/n, Bluetooth 4.0
7-inch TN LCD Resolution: 600 x1024 pixels
5-point multi-touch and
Capacitive multi-touch support
Front: 0.3M Rear: 2.0M (Flash LED optional)
1 Cell Li-polymer 2800 mAh
1 x micro-USB 2.0 OTG port
(type B)
1 x mic/head phone jack combo
Build-in Speaker x 1 Internal analog MIC x 1
10
USB-Charger
Dimension (mm)
Weight
DC Output: 5V/2A/10 Watt Input Voltage: 100 – 240VAC Input Frequency: 47 – 63Hz
188.2 x 108 x 10.4
0.4 kg
11
Loading...