ELITEGROUP COMPUTER SYSTEMS 223XIBGX Users Manual

Safety Precautions for Model 223X

This section is designed to assist you in identifying potentially unsafe conditions while
working with this product. Required safety features have been installed in the computer to
protect you from injury. However, you should use good judgment to identify potential safety
hazards:

1. Please read these safety instructions carefully.

2. Please keep this User's Manual for later reference.

3. Please disconnect this equipment from AC outlet before cleaning. Don't use liquid

or sprayed detergent for cleaning. Use moisture sheet or cloth for cleaning.

4. For pluggable equipment, that the socket-outlet shall be installed near the

equipment and shall be easily accessible.

5. Please keep this equipment from humidity.

6. Lay this equipment on a reliable surface when installed. A drop or fall could cause

injury.

7. Make sure to use the right voltage for the power source when connecting the

equipment to the power outlet.

8. Place the power cord in such a way that people can not step on it. Do not place

anything on top of the power cord.

9. All cautions and warnings on the equipment should be noted.

10. If the equipment is not use for a long time, disconnect the equipment from the main

power outlet to avoid being damaged by transient overvoltage.

11. Never pour any liquid into the opening, this could cause fire or electrical shock.

12. Never open the equipment. For safety reason, the equipment should only be opened

by a qualified service personnel.

13. If on the following situations arises, get the equipment checked by a service

personnel:

a. The Power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment has not worked well or you cannot get it work according to the

user's manual.

e. The equipment has dropped and damaged.
f. If the equipment has obvious sign of breakage.

14. Do not leave this equipment in an environment unconditioned, storage temperature

above 60°C (140°f), it may damage the equipment.

15. The unit can be operated at an ambient temperature of max. 35°C.

16. The sound pressure level at the operators position according to IEC 704-1: 1982 is

equal or less than 70 dB(A).

17. Power Cord Requirements

The power cord set used with the AC adaptor must meet the requirements of the
country where you use the AC adaptor, whether it is 100-120 or 200-240 Vac. The
following information explains the requirements for power cord set selection.

• The cord set must be approved for the country in which it is used.

• The appliance coupler must have a configuration for mating with a

CEE22/EN6032/IEC 320 appliance inlet.

A. For U.S. and Canada:

• The cord set must be UL Listed and CSA Certified.

• The minimum specifications for the flexible cord are No. 18 AWG.

B. For Japan:

• All components of the cord set must bear a “ T ” mark and registration

number in accordance with the Japanese Dentori Law.

• The minimum specifications for the flexible cord are .75m ㎡ conductors.

C. For Other Countries:

• The cord set fittings must bear the certification mark of the agency

responsible for evaluation in a specific country.

• The flexible cord must be of a HAR (harmonized) type H03VV-F.

• The cord set must have a current capacity of a least 2.5 Amperes and

voltage rating of 125 or 250 Vac.

18. When using your telephone equipment, basic safety precautions should always be

followed to reduce the risk of fire, electric shock and injury to persons. These

precautions includes the following:

• Do not use this product near water, for example, near a bathtub, washbowl,

kitchen sink or laundry tub, in a wet basement or near a swimming pool.

• Avoid using a telephone (other than a cordless type) during an electrical storm.

There may be a remote risk of electric shock from lightning.

• Do not use the telephone to report a gas leak in the vicinity of the leak.

• Use only the power cord indicated in this manual.

19. Do not use the AC adapter near open water or other liquids. Never spill liquid into

the AC adapter.

20. Laser Warning: Laser Class I Product Caution - Invisible laser radiation when open

avoid exposure to beam.

21. Danger of explosion if battery is incorrectly replaced. Replace only with the same

or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer's instructions. Never remove the battery pack while
the power is on as this may result in data loss when the system loses power.