Elite Fitness ITM 4600-E Owner's Manual

Deluxe Heat & Massage Inversion Table

Leave adequate space to

Model ITM 4600-E

CAUTION:

WARNING: Do not use this
inversion table without a
physician’s approval.

Do not let children use the
inversion table unsupervised.

Read all instructions carefully
before using.

Tighten all bolts before using
equipment.

properly invert.

Questions/ Comments

PLEASE DO NOT CONTACT THE
STORE

Elite Fitness is committed to
providing the very best of quality
and customer satisfaction for all of
the products we distribute. If for
any reason , you are dissatisfied
with the product you have
purchased or need assistance in
any way, please do not hesitate to
contact our knowledgeable support

staff at: 623-888-6379

Mon.-Fri 9:00 am – 5:00 pm Mountain Time

Owner’s Manual Version:041713

Photo may differ from actual product

1

BEFORE BEGINNING ASSEMBLY…

Take a few moments to familiarize yourself with the specific parts and hardware included with your
product. Make sure all the parts and hardware are included in the carton and examine them for any
damage that may have occurred in transport. Some parts may be pre-assembled and pre-installed.

CAUTION

WARNING:

Before starting any exercise program, consult your physician.

Read all instructions very carefully before using equipment

Tighten all bolts securely before using equipment

Product Warranty

Limited Liability

Elite Fitness warrants that this product will be free from defects in materials and workmanship for a period
of 90 Days from date of purchase. This warranty applies only to the original purchaser when purchase of
the product is from an authorized retailer and is for personal or household use, but not when the sale is for
commercial use. This warranty is not transferable.

EXCEPT FOR THE LIMITED EXPRESS WARRANTY STATED HEREIN, Elite Fitness DISCLAIMS ALL
OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOME
STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

Elite Fitness, will not be liable for any loss or damage, including incidental or consequential damages of
any kind, whether based upon warranty, contract or negligence and arising in connection with the sale, use
or repair of the product.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER
RIGHTS THAT VARY FROM STATE TO STATE.

In the event of failure of this product to conform to this warranty during the warranty period, please call Elite
Fitness Customer Service Number at 623-888-6379 for assistance in the repair or replacement of the
product or any covered part. Elite Fitness will repair or replace, at its own option, the product or any
covered part, except that this warranty does not cover damage caused by accident ( including transit) , or
repairs or attempted repairs by any person not authorized by Elite Fitness, or by vandalism, misuse, abuse,
or alteration. The Warranty Period is based on the purchase date of the product validated by the
Authorized Retailers Register Receipt, or valid copy of transaction statement. Shipping and Handling is not
included.

If you require service under this warranty, please call Customer Service at ( 623-888-6379)

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE

2

Parts Listing

13

Foam leg Rollers

443Washer

-￠18x￠6.5x1.5

1

Part# Description QTY Part# Description QTY

1 Bottom Front Tube 1 29 Bolt-M8x20mm 4

2 Backrest Support Tube 1 30 Oval End Caps-Foot Rest 2

3 Body Height Adjustment Tube 1 31 Base Frame End Caps- 4

4 Foot Rest Plate 1 32 Hexagonal Bolt-M8x65mm 2

5 Adjustable Leg Hold Tube 1 33 Square End Cap-for Part3 1

6 Handlebar-RIGHT 1 34 Stopper 1

7 Handlebar-LEFT 1 35 EVA Space Pad 1

8L Base-frame-REAR-LEFT 1 36 Round End Caps 4

8R Base-frame-REAR-RIGHT 1 37 Leg Tube Adjustment Knob 1

9L Base-frame-FRONT-LEFT 1 38 Height Adjustment Knob 1

9R Base-frame-FRONT-RIGHT 1 39

10 Leg Tube-REAR 1 40 Bolt-M8x45mm 1

11 Connecting Bracket 2 41 Metal Support Plate 100x38x2.5mm 2

Metal Bushing for Rear Leg Tube
8mm

1

12 Cross Bar 1 42 Bolt-M6x40mm 1

14

15 Round Spring Insert 1 45 Plastic Washer-￠20x￠9.5x2.5 4

16 Spring 1 46 Round End Cap-for handlebars 2

17 Plastic Spacer 4 47 Backrest Pad 1

18 Plastic Round End-cap 2 48 Head Pad 1

19 Flat Washer ￠16x￠8.5x1.5 23 49 Wrench-#13/#17 2

20 Bolt-M8x55mm 8 50 Hex Wrenches 1

21 Nut M8 16 51

22 Bolt-M8x50mm 1 52 Bolt-M8x40mm 1

23 Bolt-M8x30mm 6 53 Bottom Rear Tube 1

24 Square End Cap 6 54 Hexagonal Bolt-M8x50mm 2

25L Handlebar Grip-LEFT 1 55 Bottom Rear Tube End Cap-￠38 2

25R Handlebar Grip-RIGHT 1 56

26 Ball Pin-￠8x72.5mm 2 57 Power Adaptor 1

Incline Adjustment Bolt

13.8x88mm

￠

1 44 Nut M6 1

Metal Bushing for Rear Leg Tube

5.5mm

Backrest Heat & Massage Lumbar Pad

1

1

27 Bolt-M8x60mm 2 58 Hand Controller 1

28 Hexagonal Bolt-M8x20mm 2

3

Exploded View

4

Base Frame and Handlebar Assembly

Attach the Cross Bar(12) to the

STEP 1- Base Frame

Unpack Base frame from Carton.

Attach the Bottom Front Tube(1)
to the Front Baseframe(9) using
2-Bolts(32). Insert two Base
Frame End Caps (31) into the
Bottom Front Tube (1).

Attach the Bottom Rear Tube(53)
to the Front Baseframe(9) using
2-Bolts(54). Insert two Bottom
Rear Tube End Caps (55)

into the Bottom Rear Tube (53).

Parts Needed

Front Baseframe(9) using
4-Bolts(20) and 2-Metal Support
Plate(41),4-Flat Washers(19) and
4-Nuts(21).

Unfold Base frame- Front ( 9) from
Base frame-Rear (8),
Insert Ball Pin (26) through right
side hole between the 2 frames.

Step 2- Installing Handlebars

Note:

Handlebar

Right (6)

5