Elins Audio Mille User Manual

USER MANUAL

MILLE

STEREO SYSTEM

MANUFACTURER

ELINSAUDIO MANUFACTURE S.C.
41-200 SOSNOWIEC, 38 PIŁSUDSKIEGO ST.
POLAND

©2013 ELINS AUDIO MANUFACTUREMILLE USER MANUALPAGE 2

We have the great pleasure to present
you with our reference stereo system
MILLE. ElinsAudio came into existence in
order to pursue the perfect sound. From
the very beginning, our purpose was to
create such equipment that would fully
satisfy the needs of the most fastidious
listeners. The MILLE stereo set is the ­nal outcome of this pursuit. It is ideal for
the famously demanding magnetostatic
and dynamic loudspeakers, as it aims at
achieving maximum parfection of sound
in an acoustically challenging environ­ment. Remarkable design and unforgetta­ble sound are guaranteed by our long ­standing experience and constant striving
for perfection in the most minute detail.
Components supplied by internationally
renowned top-tier producers combined
with hundreds of hours of sound tests,
constitute the uniqueness of stereo sys­tem manufactured by elinsAudio.

We wish you lots of positive emotions.
THE ELINSAUDIO MANUFACTURE TEAM

©2013 ELINS AUDIO MANUFACTURE MILLE USER MANUAL PAGE 3

DESCRIPTION

MILLE

AMPLIFIER

MILLE is an uncompromising construc­tion that consists of a preampilier and
two monoblocks with power ampliers.
Despite the division of the amplier ele­ments into two separate chassis, the am­plier should be treated as an integral
whole, therefore it is impossible to pur­chase the preamplier or the power am­pliers separately. Such approach ensu­res full control over the nal sound effect,
which for us is a priority.

BASIC FEATURES

of the preamplier

- input impedance 10 KΩ

- non-linear distortion below 0,01 %

- bandwidth 10 Hz - 150 kHz ± 0 dB

- volume adjustment with a 41 position step-

ped attenuator

- hybrid power supply
(mains - or battery power)

BASIC FEATURES

of the power amplier

- transistor - based construction, working

in class ”D” (ICEpower Bang&Olufsen)

- 1000 W power with 4 Ohm load

- 500 W power with 8 Ohm load

-

full power bandwidth range 10 Hz - 40 kHz

- dynamic range 118 dB

- Damping Factor

≥ 1000

- THD+N distortion with 1 W = 0,007 %