eLine Technology SIP-MVD-R User Manual

Download

Page 1

NETWORK CAMERA GUIDE

Install

Browse

Use

01.BSM.11.0086701

Product Made in China under ISO9001 & ISO1400 standards

Manual Printed in China v1.0

Network Camera setup and installation guide. Browser setup with settings explained.

Page 2

CAUTION

RISK OF ELECTRIC SHOCK

CAUTION: TO REDUCE THE RISK OF ELECTRI C SHOCK DO

NOT

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

eLineTechnology.com

IR Mini Vandal Dome IP

Camera

DO NOT

OPEN

Instruction

English Version 1.0

Manual

REMOVE COVER.NO USER SERVICABLE PART S

The

lightning flash with arrowhead symbol, within an equilateral triang le, is intended to alert the user to the presenceof un-insulated "dangerous voltage" within the product’s enclosure that constitute a risk of electric shock.

The

exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the

accompanying

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO EXPOSE THIS UNIT TO RAIN OR

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF THE PLUG TO THE WIDE SLO T AND FULLY

literature

may be

the appliance.

MOISTURE.

INSIDE.

of sufficient magnitude to

NOT

INSERT.

Page 3

eLineTechnology.com

Important

In addition to the careful attent ion

video

product, safety is a major factor in the design of

your your responsibility too. This sheet lists impor tant information that will help to assure your enjoyment and proper use of the carefully before operating and using your

Installation

Read and Follow Instructions-All the safety and

operating instructions should be video

product is operated.Followalloper

ins

uctions.

Retain Instructions-The

instructions should be retained for future

Heed Warnin gs-Comply with all warnings on the

video

product and inthe operating ins

Polarization-Do not defeat the

4. safety purpose of the polarized grounding-type plug. A polarized plug has two blades with one wider t han the A grounding typepl ug hastwo

and

a third ground ing prong.

blades The wideblade or the t hird prong are provided for If the providedpl ug doesnot fit into consult an electrician for replacement of th e obsolete outlet.

PowerSources-This

5. operatedonly from the type ofpower indicated on the marking label. If the type of power supply toyour your

video

dealer orlocal products intended to operatefrom battery power, other s ources,

Overloading-Do not overload wall outletsof

extension cordsas this can or electric shock.

fray

ed powercords,

cords, insul ation, and broken plugs are

result

in a shockorfire hazard.Periodically

may examine the cord, damage or deteriorated insulation, by yourservicete

Power Cord Protection-Power supply cordsshould

be routed so that theyare not or pinc hedby item s placed upon or against them, paying

particular attention to cords at plugs, conveniencereceptacles, exit from the

Safeguards

safety and operating

other.

yoursafety.

video

product should be

power

refer

to the operating ins

result

Overloaded AC

damagedorcrackedwire

and if its

appearance

chnician.

likelyto be walked on

and the point where they

videoproduct.

devoted

video

product and

ead before

ating

refer

tru

ctions

youroutlet,

sour

you

are not sure of

loca

tion,consult

company.

For video

tru

ctions

in the r isk of

outlets, extension

dangerous.

indicat

haveitreplac

to quality standards in the manufacturing process of

video

the

ence.

fire

They

every

instrument.

However,

accessory

product.

equipment. Please read them

Ventilation-Slots and openingsin the caseare

provided

for

ventilation to ensure reliable operat

video

product and to protect itfrom

of the

These openings

overheating. covered. The

openings should never be blocked by

video

placing the other similar surface. T his neverbe placed near or over a radiator or heat

This video

ess

proper ventilation is provided or the video

un product manufacturer’s instructions fo

llow

ed.

Attachments-Do not usea ttachments

ecommendedbythe

cause

they may

10.

Camera ExtensionCa bles–Check

your extension your

localauthority regulationsprior to inst

11. Water

and Moisture-Do not useth is

near water. For example, neara bath tub, wash bowl, kitchen si nk or laundry tub, in aw basement, near aswimming pool and the

Caution: Maintain elec trical safety. operated

equipm ent or accessories connected to this uni t should bear the ULlisting mark of C SA certification mark on the not be modified s oas to defeat the safety This

will

help electr ical shoc kor f ire. If in doubt, contact qualified service personnel.

12.

ccessories-Do not placethis

video

equipm ent on anunstabl cart, stand, tripod, or table. T he video

equipment may fall, causing

damage

serious product. Use this only with a cart, stand, bracket, or tablerecommendedbythe manufacturer or sold wit h the mounting of the p roduct should manufacturer’s instructions and use amount ing accessoryreco

must not be blocked

equipm ent on abed, sofa, rug,

video

product should notbeplaced in a

bookcaseorrack

video

product manufacturer as

a h

azard.

cable(s)

to verify compliance with

accessory

avoid any

potential hazard

to the video

videoproduct

tripod,

video

mmended by the manufacturer.

safety is

product should

have

unl

the rating of

videoproduct

Powerline

itself

and shou

from

product. Any

follow the

been

ess

lik

fea

allation

tures.

Service

13.

Servicing-Do not attempt to servicethis video

equipment yourself asopening may

expose

you to dangerousvoltage or other

Referall servicingt o qualified service

hazards. personne

Conditions Requiring Service-Unplug this video

14. product from the qual

ifi ed servicepersonnel under thefollowing

cond

itions:

•

When

ion

the power supply cord or plug is damaged.

•

If liquid has

been

the

videoproduct.

•

If the

video

product has been

water

•

If the

video

product

foll

owingthe oper ating instructions. Adj ust only those controls that are covered byth e operatin instructions. Improper adjustment of othercontr

result

damage

may

work by aqual

extensive the

video

product to its normal operation

•

If the

video

product

has been damaged.

•

When

the

video

in performance. This i ndicates an eed

15.

Replacement

Parts-When

required,

have

the serv icetechnician ver ify that the

s used

replacement characteristics as the original parts. Use of replacements specified by the manufacturer can prevent fire, other hazards.

16.

Safety Check-Upon completion of

repairs to this

video technici an to perform safety checks by the manufacturer to determ ine tha t the video product is in safe operating

17. Wall or

Ceiling Mounting -The cameras provided

should be mounted to a w instructed in this guide,using the p rovided

acke

mounting

18. Heat

The productshould be situated heat sources suchas radiators, heat stoves,

or other products (including amplifiers) that

produce

heat.

orremoving covers

walloutlet and

product exhibits a distinct change

ts.

refer

spilled or objects

has beendropped

have

product, ask the service

havefallen

exposed torain or

does

not operate normally by

and

will

oftenre

ified techniciantorestor

replacemen t partsare

the same safety

videoproduct

elec

tric

any

eco

ndition.

allor ceilingonly

regis

servicing to

quir

or theca binet

for

shockor

service

mme

awayfrom

service.

ter

nded

Use

19.

Cleaning-Unplug the

outletbeforecleaning.Donot useli aerosolcleaners. Usea damp cloth

Product and

Cart

20. combinat ion should bemoved withcare. stops, causet he

verturn.

Object and Liquid Ent ry-Never push objects of any

21. kind into this they mayto uch dangerousvol tagepoints

int

“short-out” elec video produc

22.

Lightning

product during a lightnin g storm, or when it is unattended andunused

unplug it antenna

ols

to the su

Combination-Video

excessive

force, and

video

product and cart combinationto

video

product through openingsa s

parts that could

tric

shock. Never

- For

added

from

the wall outlet anddi sconnect the

orcablesystem. This

video

product due tolightning and power line

ges.

video

product from the

quidcleanersor

forclea

uneven

surfaces may

result

in a fire

spill

liquid of any kind on the

protection

for

this video

forlong

periods of time,

willpreventdamage

andca

Quick

ning.

wall

left

Precautions

Page 4

eLineTechnology.com

General

1. All warnings and instructions in this manual should befollowed.

4. During lightning storms, or when the unit is not used for a

FCC CLASS A

Precautions

Remove

the plug from the outlet before cleaning.Donot use liquid aerosol detergents.

dampened

enough

cloth for cleaning.

space

around the unit for ventilation. Slots and openingsin the stor

ong

time, disconne ct the power

sur

water Keep

should not beblocked.

supply, antenna, and cables to protect the un it from elect rical

NOTICE

ge.

NOTE

This equi pment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. Th ese limits are designed to provide r easonable protectio n against interf erence wh en the equipmen t is operated in a commercial enviro nment. This equ ipment gener ates, uses, and can radiate radi o frequency energy and, if not installed and used in accordance wit h the manu instruction manual, may in a residentia interf erence at your own expen se.

cause

lareais likely to cause harmful interferen ce, in which case you wil l be req uired to correctthe

harmful i nterference with radio communications.

Operation

of thi sequipmen t

This

equipment

has been

certified

and

LVD.

Therefore, it is

cause

interference with othe r applianceus age.

However, usage which may result in damag e to the unit, electrical shock and fire hazard injury.

In order to improve the feature functions to

change

designatedtoprovide

it is imperative that the user follows the guidelines in this manual to

without notice f rom time to time.

found to comply with the limits regulated

reasonable protection against interference

and

quality of this product, the specifications are

by FCC, EMC,

avoid

Use

age

cabinet

rmful

facturer’

and

will not

improper

subje

Features

and

•HDCMOS

•

720p or 1080p models with

•

Triple-streaming

•

Future proof

•

Compatible with popular third party

•

Power-over-Ethernet

•

Backup options: micro SDcard

•

Mobile Apps: iPhone®, iPad®, Android™

•

Supports two-way audio

•

Compact size 4” x

•

Simple 2 screw insta

•

3.6mm wide anglele

•

30 ft. (9m) IR Night

•

IP66

•

Multi-browser support:

•

3-axis gimbal

Progressive Scan

(H.264/MJPEG)

ONVIF 2.1

compliance

(PoE)

2”

llation ns, optional lens size up to 6mm

Vision,TrueDay/Night (TDN)

Weatherproof and IK7

IE,

for versatile mounting

real-time

operation,

(25/30

fps)

(1.02

backwardsco

VMS

softwar

14Watt max/12V

, FTP, NAS,loca

Vandal

Resistant

Firefox, Safari, Chrome

mpatibl

operation

Check Onvif c ompliance on for your software.

Page 5

eLineTechnology.com

TABLE OF

Getting

Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . 1

CONTENTS

1.1 Default Camera Username, Password, and Ports . . . . . . . . . ..1

1.2 Camera Interior Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2.1

Functions of Status LED’s . . .. . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . .. . . . . . . . . . . . .

1.3

ONVIF

Compatibility and Included Software Overview . . . . . . ..3

1.3.2

1.3.3 CD Conten ts

Connection Camera

3. Finding

NVMS . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . .. . . . . . . .. . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

the

Camera’sIPAddress

. . . . . . . . . . . . . . . . . . 8

4.1 Finding the Camera’s IP Address Using NVMS . . . . . . . . . . . . ..9

4.2 Finding the Camera’s IP Address using

UPnP

4.3 Finding the Camera’s IP Address using Bonjour® in Mac OS®

4.4 Finding the CameraIP using the BNC Test Cable . . . . . . . . . . .

Configuring Remote

5.1

Connecting

Web Configuration

to a

Connection

DDNS

address using NVMS . . . . . . . . . . . . . ..15

. . . . . . . . . . . . . . . . . . 12

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

6.1 Supported Browsers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..17

6.2 Chrome, Firefox, and Safari Setup . . . . . . . . . . . . . . . . . . . . . .

6.3 Internet Explorer® Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.4

Web

Interface/Live

6.4.1

Live

Video

Menu . . . . . . . .. . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .

Configuring Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . .. . . . . . . . .

6.4.2

6.5

Device

Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..23

Video Overview

. . . . . . . . . . . . . . . . . . . . . ..21

6.6 Stream Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.7

Device

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..25

6.7.1

Local Network . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . .

Port . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . . . .. . . . .

6.7.2 Device

Camera . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . .

6.7.3

Date & Time . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . .. . . . . . . . . .

6.7.4

OSD . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . .. . . . . . . . . . ..

6.7.5

Microphone . . . . . . . . . . . .. . . . . .. . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .

6.7.6

in Windows® 7. .

6.7.7 BNC Video

6.7.8

6.8 Alarm Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.8.1

6.8.2

6.9 Local Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 3

21 22

26 27 28 28 30 31

6.9.1

6.9.2

6.10

Privacy Masking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.11

Network Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.11.1

6.12 Service

6.12.1 SMTP

6.13

Privilege Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.13.1

6.13.2

6.13.3

6.14

Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.14.1

6.15 Device

6.16

Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.17

Sensor Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.17.1

6.17.2

6.17.3 Gain

6.17.4

6.17.5

6.17.6

6.17.7 AE

6.17.8 WB

6.17.9

6.17.10

6.17.11

ResettingtoFactory

Dimensions Troubleshooting

Output . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .. . . . . . . . ..32

Language . . . . . . . . . .. . . . . . . . . . . . . . . . . . .. . . . . . . . . . . .. . . . . . . . . .. . . . . . . . ..32

Disk Alarm . . . . . . .. . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...33

Motion Alarm . . . . . . . .. . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..34

Record Directory . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..36

Record Policy . . . . . . . . . . . . . . . .. . . . . . . . . .. . . . . . . . . . . .. . . . . . . . . . . . . . . . . . ..41

DDNS . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . .. . . . . . . . . .. . . . . . . . . . . . . ..44

Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(Email Alert Setup) . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .. . . . . . . . ..45

Group . . . . . . . . . . . . .. . . . . . . .. . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . .. . . . ..47

User . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .. . . . . . . . ..48

Unlocking User Accounts . . . . . . . . . . . . . . .. . . . . . . . .. . . . . . . . . .. . . . . . . . . .. ..49

Protocol . . . . . .. . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . . .. . . . . . . . .. . . . . . . . ..50

Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

50 51

Image Adjust . . . . . . . . . . . . . . . . . .. . . . . . .. . . . . . .. . . . . . . . . . . . . . . . . . . . . . . ..52

Shutter Control . . . . .. . . . . . . . . . . . .. . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . ..52

Mode .. . . . . . . . . . . .. . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . ..53

Day/Night Mode . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..53

Auto Iris . . . . . .. . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..54

Gamma . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..54

Meter

Mode

. . . .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..55

Setting . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..55

WDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...56

Mirror . . . . . . . . . . . . . . . .. . . . . . . . . . . . . .. . . . . . .. . . . . . . . . . . . . . . . . . .. . . . ..57

Noise Filter . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . ..57

Defaults . . . . . . . . . . . . . . . . . . . 58

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Page 6

eLineTechnology.com

GETTING

The

system comes with the following

components:

•

1 x Camera

•

1 x Mounting Screw

•

1 x Allen Key

•

1 x

RJ45

•

1 x

BNC

Test Cable

•

1 x Mounting Template

•

1 x Quick Start Guide

•

1 x Instruction Manual

•

1 x Software/Documentation CD

STARTED

Kit

Coupler

1.1

Default Camera Username, Password, and

Username: admin

Password: admin

Ports: 80

(HTTP),

30001

(Control/Streaming), 8080

IP Address: address)

DHCP Enabled by Default

NOTE:

Once

you

have recommendedto IP addresschanging in the Local Network” on page 26.

completed the basic setup of the camera, it is

configureastaticIPaddress. This

event

BNC Test

(Router will automatically assign IP

of a power failure. For details,

Mounting Screw

•

2 x

mounting screws

(PA4

30mm)

•

2 x drywall anchors

Allen Key

Cable

(RTMP),

willprev

Kit:

RJ45

Coupler

Ports

554 (RTSP)

ent theca

see

mer

“6.7.1

1.2

Camera

Mounting screw hole

Interior Overview

Termination cables

BNC

analog output

Status LED’s

microSD card slot (m ax. 64GB supported; SanDisk™/Kingston™ memory cards recommended)

brand

Reset button

IR LED

CdS

Light sensor

Mounting screw hole

1.2.1 Functions of Status

•

POWER (Top):

•

NET (Middle):

LED’s

Glows

green when camera is

Flashes red to indicate network activity.

connected

to power.

1 2

Page 7

eLineTechnology.com

1.3

ONVIF Compatibility and Included Software

This camera is popular more information on

NOTE:

cameras is available via Safari® browser only.

1.3.1

•

NVMS cameras.

•

NVMS SD

•

NVMS

ONVIF v2.1

VMS’s and NVR’s*,

Provided software is

compliant. It is designed for interoperability with backwards compatibility to

ONVIF,

visit www

.onvif

.or

compatible only; Mac

NVMS

is a

client-only solution

NVMS

is a free software provided on the CD.

supports all the features of the camera. It

card recordings and camera setup over a local network.

manual is provided on the

that

supports up

CD.

to 36IP

can access

Overview

ONVIF v.1.02.

OS® access

micro SD/

with

For

to the

1.3.2 CD Tools

•

CD contents Folders

IP Search ; Search find IP Cameras and set IP address and gateway NTP Service Tool ; Time Sync Application: IP devices match one PC system time. FTPUpdater ; Firmware Update tool IP Support Help Files ; Website support help documents for common problems. RTSP Tool ; provides RTSP string command f. e.g VLC or Quick-time use SD Driver ; Ext2 driver for Windows XP to read sd Memory card on PC Onvif_Help ; documents on Onvif specifications Open the NTP service ; Windows XP only enables NTP time to be enabled. Adobe Flash Player ; Flash Video player for Windows IE plugin and Apple Mac OS Adobe AcrobatReader ; Windows and Max OS Acrobat Reader v10

Files: IP_series_bitrate_calculator.htm ; Simple storage calculator for IP devices NVMS_Install.exe ; NVR Software installation for PC NVMS_Manual_1.7.pdf ; Guide to use the NVMS Software SNMedia_Player.exe ; File Player for recorded files / backup files from devices / NVMS.

2. CONNECTION

The

camera has the following termination cables:

RJ45

Network

RJ45

Ethernet cable

Use

the included

Interface:

12V DC

using supported (class 3

NOTE:

Ethernet cable.

Audio Input (RCA):

audio.

Audio Output (RCA):

intercom/2-way audio.

DC12V (1A):

polarity (+/-) marked on the power connector when connecting to power.

•

Minimum Power Requirement:

Connect

to a

router

(Cat5e

PoE

switchre

Connect

power input terminal. Make sure tofollow corr

or better).

quir

RJ45

coupler to connect to male end of RJ45

RJ45

Coupl

to a self-powered microphone

to an amplifier or self-powered speakerfo

450mA/5.4W.

or switch on your network

100Mhz

ed).

connection. PoE

for listen-in

ect

3 4

Page 8

Connection

eLineTechnology.com

CAMERA

Use

the included allen

remove

the cameracove

screws

(2x).

away

Lift the cove

from the ca

Use

the included mounting template or the camera to mark holes screws.

for

INSTALLATION

Make

sure to follow the correct polarity if connecting the camera to power connector.

mer

the mounting

keyto

power. Polarity is marked on the

Mounting Screw Hole

3. Mount the camera to the

surface using the included mounting screws (2x).

TIP:

The NET LED flashes when the camera is connected

in the middle

to the network.

(Optional) included the terminals and connect to a test monitor to check the camera viewing angle.

video

Insert the

BNC

test cable into 4

test cable

(Optional) card into the camera. To enable recording, you mus format configure microSD recording. For details, see “6.9.1 Record Directory” on page

NOTE:

microSD cards up to a maximum size of 64GB. SanDisk™orKingston™ microSD cards are recommended.

Insert a microSD

the microSD card and

36.

The

camera supports

brand

Mounting Screws

NET LED

microSD card

BNC

Test Cable

5 6

Page 9

Finding the Address

eLineTechnology.com

6. If you need to adjust the

viewing angle, screws on the sides of the ball camera and adjust the ball camera.

screws holding

the camera.

when finished.

NOTE:

camerais pointedin direction as the IR ensure a image.

loosen

Do not

Tighten the

Ensure the

good

nighttime

7. Ensure the rubber

inside the camera is properly in place, then replace the camera and the camera screws (2x).

cove

the

remove

the ball

scr

ews

ball

thesame

LEDto

gask

cover

Loosen screws to adjust the angle of the ball camera

not remove the screws

holding the ball camera.

IR LED

FINDING THE CAMERA’S

Use

the steps below to find the camera’s IP address and connect to the camera over the local area network Windows® 7, or Bonjour® in Mac OS®.

4.1

Finding

1. Install

Desktop.

2. Under User Name and

(

admin)and password(admin).Click Login.

the

Camera’sIPAddress Using

NVMS

from the

Thelogin screen

CD. Now

Password,enter the default

appears.

(LAN)

Doubl

e-click

IP ADDRESS

using

NVMS, UPnP

the

NVMS

Enter Admin Enter Admin

NVMS

Detected camera IP addresses on the LAN appear in the

the

left

Click Login

opens and scans the localnetwork

side of the screen with a icon.

for

connectedca

Found

camera

IP address

NVMS

icon

user name

mer

Device

(

) on the

as.

List on

7 8

Page 10

Finding the Address

eLineTechnology.com

4. Click on a camera IP address in

5. Under

User Name,enter the user name Password,enter the password

Under Click Continue.

Device

List tolo

gin.

for

the camera (default: admin).

for

the camera (default: admin).

Enter Camera User Name (default: admin)

Enter Camera Password (default: admin)

Click Continue to login

The

camera appears under the camera IP address. Click and drag the

camera to the display grid to open

it.

Click and drag the camera to the display grid to open

NOTE:

manual on the CD.

4.2

Finding

Windows®

NOTE:

and

computer mustbeon

default,

manual

For detailed instructions on using

the

Camera’sIPAddress using UPnP

To use

this method, your

and canbeenabled/disabledusing

for details).

the

same

router

network.

NVMS,

see the NVMS

must support

UPnP

NVMS (check

UPnP and

is enabledin

theca

mer

theca

mer

the NVMS

1. Click

under Network

Start>Computer>Network.The

Infrastructur

camera’s IP address appears

Double-click to open the camera

Network

2. Double-click the camera to open it in your default browser.

3. Under User Name and

admin)and Password (default:

(default:

4.3

Finding

Mac

OS®

NOTE:

a a

network. Bonjour® is enabled by default, and can be enabled/disabl using

Open

the

To use

this method, the camera

NVMS

(check the

Safari® browser and click the Bookmarks button ( ).

Password,enter the camera’s User Name

Enter Camera User Name (default: admin)

Enter Camera Password (default: admin)

Click Login

admin)and click

Camera’sIPAddress using

and

computer must

NVMS

manual

for details).

Bonjour®in

be on

the same

9 10

Page 11

Configuring Connection

80 80

Control

30001

100

Finding the Address

eLineTechnology.com

2. Click

Bonjour

. The

list.

3. Double-click the camera to open it in

camera’s IP address appears in the Bonjour Devices

Bookmarks button

Bonjour

4. Under User Name and

(default:

admin)and Password (default:

Password,enter the camera’s User

Enter Camera User Name (default: admin) Enter Camera Password (default: admin)

Click Login

4.4

Finding

When

the on the test monitor. test cable.

NOTE:

cannot obtain an IP address from the connections and

the

CameraIPusing

BNC

test

cableisconnected

The

default IP address of

routerco

camera must

nfigur

Saf

ari®.

Double-click the camera’s IP address

admin)and click

the

to the camera, the

be connected

192.168.0.120 router.

ation.

BNC Test

to power to use the BNC

is shown if the ca

Check

Name

Cable

IP address

the Ethernet/power

is shown

mer

5. CONFIGURING REMOTE

Follow the steps below to configure your camera for connections over the Internet using a web browser,

Step

1 of6:

Locate

the

•

See

“4. Finding the Camera’s IP Address” on

Step

2 of6: Port

You

need to enable port forwarding for the following ports on your router to

the camera’s local IP address:

•

HTTP

•

Control Port (default: 30001)

NOTE:

access, you use the same port number

NOTE:

your installation has specialre

There are two methods for port forwarding:

•

You for details. An example of a port forwarding screen is shown below.

Forward your

Port (default: 80)

If you are configuring multiple IP cameras

must

change

Port forwarding the

can

manually port forward your router.

NVMS,

camera’s local

router:

the ports

RTSP

quir

or other

IP address:

for

and

ements.

CONNECTION

VMS

software.

page 8

for

camera.

ports is not

individualre

Two

cameras cannot

necessary

each

RTMP

See yourrouter’s user manual

HTTP

100

mot

unless

11 12

Page 12

Configuring Connection

eLineTechnology.com

Step

3 of6:

Locate your camera’s MAC

Open

a web browser and enter the camera’s IP address in the address

bar in the followingfo

http://

http://192.168.0.120:80

2. Under User Name and

(default:

3. Click

admin)and Password (default:

Device Info

rmat:

address

Password,enter the camera’s User Name

and write down the

address:

Colon

HTTP

MAC

Step

4 of6:

that points back to your local network.

set up your free

NOTE:Your router

NOTE:

You

the same LAN.

for DDNS:

services which are currently supported for use

DDNS

account.

must support

may use the same

UPnP

DDNS

to enable DDNS.

account

port number

admin)and click

Address.

MAC

you

to set up

The

following outlines how to

for

multiple IP cameras on

Address

a web

site

Step

5 of6:

1. Ent

3. Configure the

•

4. Click

Step

1. Enter the camera’s

2. Under User Name and

Once connect to the IP camera from a remote location using a web browser, NVMS

Servic

Network

Check

Provider:

Domain Name:

confirmation email you received after you created your (e.g.

User Name:

Password:

6 of6:

format

http://

(default:

you

e>DDNS

Enable

DDNS.

foll

Select the ddns service you use..

mycamera.dyndns.org

Enter the

Enter the account name

save

Connect

mycamera.dyndns.org:80

admin)and Password (default:

have

logged into your s ystem using your

Enable DDNS on

er the camera’s IP address in your web browser. Log in and then

the camera:

owing:

Enter the

settings.

Domain

Name you received from the

User

Name

Password

to the

camera’s DDNS

DDNS

address in your web browser in the following

DDNS

address

Password,enter the camera’s User Name

address:

HTTP

admin)and click

DDNS

Colon

port number

address, you can

click

account

13 14

Page 13

Configuring Connection

eLineTechnology.com

5.1

Connecting

NOTE:

method.

Open NVMS

2. Click

Manager

Enter the camera’s DDNS

address

3. Under

For example, enter

4. Under

(Optional)

Add

6. Click

7. Click

Savetosave changes.

to a

DDNS address using

Complete all the steps

and click

. The Device Maintenance

Device

IP, enter the

Control

mycamera

Port, enter the camera’s control port (default: 30001).

Under

Device Name,enter a name

to add the camera to the

above

before performing the following

Device

Manager>Video

Click Add Click Save

Domain

Click OK.

window opens.

Name from the confirmation email.

.dyndns,org

Device

Lis

for t.

Device

the ca

NVMS

Manager.

mer

Control Port

Close Device Maintenance Video

screen.

The

newly

and

Device Manager,

added

camera will appear in

and

Found

camera

NOTE:

A icon is shown

not affect your ability to connect to the camerare

9. Click on the camera in admin)and

Password

for

all cameras outside of the LAN. This does

Device

List tolo

(default:

gin. Enter the

admin)and then click Continue.

motely.

Enter Camera User Name (default: admin)

Click Continue

10.Click and drag the camera to a display grid screen to open

Click and drag the camera to the display grid to open

NOTE:

For detailed instructions on using

manual on the CD.

Enter Camera Password (default: admin)

NVMS,

see the NVMS

return

to the

Device

Lis

User Name

it.

(def

Liv

ault:

15 16

Page 14

Configuration

eLineTechnology.com

WEB

The

camera includes a built-in web interface that can be

web browser.

6.1

•

Google Player)

•

Microsoft Internet Explorer®

6.2

Connect address. Open

in the

NOTE:

setup and port forwarding required; see “5. Configuring Remote Connection” on

3. Under User Name and

(default:

CONFIGURATION

Supported

Chrome, Firefox, and

your browser and enter the camera’s IP address in the address bar

foll

You

Browsers

Chrome, Mozilla Firefox, and Apple Safari®

7.0

or later, 32-bit version

Safari Setup

the camera to yourlocalnetwork and find the camera’s IP

See

“4. Finding the Camera’s IP Address” on

owingfo

rmat:

http://

http://192.168.0.120:80

Camera IP address

can also connect to the camera using a

page12for

admin)and Password (default:

details).

Password,enter the camera’s User

Colon HTTP

port number

DDNS

admin)and click Login.

Enter Camera User Name (default: admin)

Enter Camera Password (default: admin)

Click Login

accessed

(via Adobe

(via

ActiveX®)

page

address (DDNS

Name

using a

Flash

The

main screen

view and configure the

NOTE:Ifyou

has the latestvers

www.adobe.com/ to download the latest version). After installing Flash

Player, restart your browser and reconnect to the camera.

6.3 Internet Explorer® Setup

Step

1 of2:

Open

Internet Explorer and open the Security tab.

•

Internet Explorer 8: Click Security

•

Internet

tab.

2. Click

Custom

do not

Change

tab.

Explorer 9:

Level.

for

the camera web interface

camer

see video

ion of

Internet

from the camera, make sure yourco

Adobe

Flash Player installed

Explorer security settings

Tools>Internet

Click>Internet

opens.

Options

From here youcan

(visit

http://

for ActiveX®:

and select the

and

select the Security

Click Custom level

mputer

17 18

Page 15

Configuration

eLineTechnology.com

Download unsigned ActiveX controls,click Prompt

3. Under

(recommended) or Enable.

Select Enable or Prompt under Download

unsigned

ActiveX

Click

4. ClickOK.

Step

2. Enter the camera’s IP address in the address bar in the

Click OKagain to

2 of2:

Log into

Connect

address.

camera:

the camera to yourlocalnetwork and find the camera’s

See

“4. Finding the Camera’s IP Address” on

http://

http://192.168.0.120:80

IP address

NOTE:

You setup and port forwarding required; see “5. Configuring Remote Connection” on

3. Under User Name and

(default:

can also connect to the camera using a

page12for

Password,enter the camera’s User

admin)and Password (default:

save

changes.

Colon

HTTP

port number

DDNS

details).

admin)and click Login.

Enter Camera User Name (default: admin) Enter Camera Password (default: admin) Click Login

controls

page 9.

foll

owingfo

address (DDNS

Name

rmat:

4. If your computer has Flash Player installed,

camera web interface camera.

NOTE:

The ActiveX Flash Player. Then

click inside the

this computer,and follow the prompts.

use

plug-in

opens.

From here youcan view and configure the

may ActiveX, video area,

provide smoother

click the

select

the main screen

message above

Install

video

this Add-on for

performance than

the

Install

ActiveX

plug-in

NOTE:

If your computer

prompted

toselect ifyo

to thecamera:

•

Clicktoplay (recommended):

install the plug-in, click on the

for all

•

Clicktodownload

Opens completing the installation, restart your browser and reconnect to the camera.

live

users on this computer,and follow the prompts.

a link to download Flash Player from

does

not

u would liketo

video

with

UsesanActiveX

ActiveX controltoreduce

the latest

versionofFlash

have

Flash Player installed,

use ActiveXor Flash

plug-in to connect to the camera. To

video

area,

and

Adobe’s

Playertoconnect

latency

select Install

Player to

play

website.

Select

ActiveX

or Flash Player

for the

video

all

you will be

this

live video:

After

window.

users

Add-on

19 20

Page 16

Configuration

eLineTechnology.com

6.4

Web

Interface/Live

Camera configuration menus

TIP:

Select stream2 for better performance for remote

connections. Stream2 has a lower resolution than stream1.

The

Live

video page

requires an Active X® plug-in or

6.4.1 Live Video

You

can

right-click

appears when you log into the camera. Live video

on the live

Video

Click and drag to zoom in. Right-click and select

Double-click inside window for

Select Stream

Overview

ZoomOut

Adobe

video

Right-click on the open the Live

to zoomout.

Flash Player.

area to bring up the Live

Video

video

full-screen

Video

area to

Menu.

The Live Video Menu contains

•

Full

Screen:

Open

•

Sensor Config:

Configuration” on

•

ZoomIn:

•

ZoomOut:

•

Restore Panorama:

Configure the camera sensor settings.

Zoom in one level.

Zoom out one level.

the

following

the

video

in full screen. Press

page 51.

Zoom out all the way.

options:

ESC

to exit fullscreen.

See

6.4.2 Configuring Camera Settings

•

Click the optionsonthe left to configure camera settings. Setting options are detailed in the remainder of this section.

Click to select camera menus

TIP:

Some

sub-menu options to factory defaults.

sub-menus

changes.

have

a Reset button. This button will reset the

You

then

have

to clickOKto save

“6.17 Sensor

21 22

Page 17

Configuration

eLineTechnology.com

6.5

Device

Info

The Device Device version, configure the

ATTENTION:

installation has special requirements.

To configure

1. Click

2. Under

Info

page

Name (which appears in the

MAC

Device

Device Name,enter the desired

shows information about your IP camera, such as the

address, and camera inputs and outputs.

Device

Name for your camera.

The device

the

Device

Info.

ID is unique.Donot

Name:

Device

List in

NVMS),

You

change

it unless your

device

name and then click Set.

firmware

can also

6.6

Stream

The

Stream Configuration streams. youtohave a (stream2) to preserve bandwidth for remote connections, and an MJPEG stream for applications requiring MJPEG.

To configure video streaming

1. Click Stream

would like toco

2. Configure the

•

Video Encode Type:

Stream1 and stream2 can be configured for

Main

•

Audio Encode Type:

G711_ALAW,G711_ULAW,or RAW_PCM.

•

Resolution:

canbeset to Stream3 can only be set to 1920x1080.

Configuration

page

The

camera supports three different

high quality recording stream (stream1),alower quality stream

Configuration.Under Stream ID, select the stream you

nfigur

foll

owing:

Profile, or

H.264 Base

Select the resolution for the stream. Stream1 and stream3

1920x1080or640x360

allows you to configure the camera’s video

settings:

Select the

Profile. Stream3 supports

Select the Audio

video

Video Encoding

H.264 High

Encoding

. Stream2

can onlybeset to 640x360.

streams. This allows

type for the stream.

type for the

Profile, H.264

MJPEG

stream:

only.

23 24

Page 18

Configuration

eLineTechnology.com

•

Frame

Rate:

30FPS

NOTE:

limitations.

•

I Frame interval: Select the interval for I frames: 1, 2, or 3.

value of 2 should be used unless there are special requirements. Frame interval

•

Bit Rate:

(Variable supports VBR.

•

Quality:

TIP:

A quality of 7 provides a

high quality value with a small

3. Click

6.7

Device

Configuration contains the following sub-menus:

•

Local Network

•

Device

•

Camera

•

Date & Time

•

OSD

•

Microphone

•

BNC Video

•

Language

•

Multicast (Not supported)

•

Dome

Select the frame rate for the stream up to maximum of

for stream1 or stream2 or

Frame rate maybe a

does

not apply to stream3.

For stream1 or stream2, select

Bit

Rate).

Enter the desired bit rate below in

Select the

to apply changes.

video

12FPS

for stream3.

utomatically

quality between 1 (lowest) and 9 (highest).

good

VBR

adjustedtoaccountforbandwidth

CBR

(Constant

picture. It is not recommended to set a

bit rate.

Configuration

Port

Output

PTZ

(Not supported)

Bit

kbps.

The

default

The

Rate)

or VBR

Stream3 only

6.7.1 Local

The network parameters if address for the camera select

To configure

1. Click

2. Under IP

3. Select

•IPAddress:

•

Network

Local Network

IPv4

NOTE:

DHCP is shown under IP address. This of a powerfa

Device

sure it is supported on your network. network administrator or

Device obtain anIPaddress automatically use

the

you are using a static IP address, configure the following:

Make sure the IP address is available on your network.

Subnet Mask:

Preferred

servers.

page

shows the camera’s current IP address and

DHCP

is enabled. It also allows you to set a static IP

(see

or IPv6.

is dis

DHCP

ilur

the

camera’s networking

Configuration>Local

Protocol,select

followingIPaddress

Enter the IP address

Enter the subnet mask.

DNS

below), set the networking parameters, and to

abled by

default.

IP.

Use the IPScan tool on CD

will

prevent the camera IP address changing in the event

IPv4orIPv6.If

ISP

Server/Alternate

When DHCPisenabled,

parameters:

Network.

you

You

for

details.

to set a static IP address

you

would like to assign to the camera.

DNS

Server: Enter desired DNS

to configure a static

would like to use

may need to contactyo

to use

theIPaddress

IPv6,

DHCP

or Device

for

the camera.

mak

25 26

Page 19

Configuration

eLineTechnology.com

OKtosave changes. The

4. Click

address.

6.7.2 Device

The Device configure the camera’s port configuration. ports:

•

Control

•

HTTP Port:

HTTP camera’s when connecting using an Internet browser enter http://192.168.x.x:85).

•

RTSP

•

RTMP

NOTE:

access camera.

To change camera

1. Configure the camera ports as required and then click OK.

2. Click

Port

page (

Device

port:

The

default is

The

is port is anything other than

If you are configuring multiple IP cameras

Device

default is

IP address and

Port: Default is streaming, such as VLC player or quicktime movie.

Port: Default is

(without an

Two

NVR

cameras cannot use the same port number

ports:

Configuration>Device

camera will

Configuration>Device

30001.

80. Enables web access. Please

colon

(:) and

554. Only

used for special applications

8080. Only

or server),

restart

The

camera has the following

Enables

video

80, you

must enter http:// before the

the

HTTP

port after theIPaddress

(e.g.

used for special applications.

you

must

change

Port.

with the new IP

Port) allows yo u to

streaming.

if the

for

all the ports

note that if the

HTTP

port is 85,

requiring

individualre

for

mot

each

6.7.3 Camera

The

Camera

page (

the

Channel

frequency.

To change

•

Configure the next to Channel Name.

To change

•

Select the desired setting under button next to Source Resolution.

Device

Name, which appears on the camera

the

Channel

Channel Nameasneeded

the

video system

6.7.4 Date & Time

Configuration>Camera)allows you to configure

Name:

frequency:

Video System

OSD

and the

video

and then click the Set button

and then click the

system

Set

27 28

The

Date & Time

page

allows you to configure the camera’s date and

time.

Page 20

Configuration

eLineTechnology.com

You can

set the

camera’s date and

•

Using an

NTP

server (recommended)

•

Using your computer’s system

•

Manually

The

camera is configured to use must set the time to ensure accurate time. After a power failure, the camera is configured to update the time wh en power is restored. If using another method to set the camera clock, time must be manually updated after a power

set the

1. Click

2. Under

3. If your region

4. Next to Current

To sync

1. Click

2. Un-check

3. Under

4. If your region

5. Click

1. Click

2. Under

camera’s date and

Device

Configuration>Date & Time.

Time Zone,select your time zone.

daylight saving

•

Under Start and

daylight saving

•

Under Start and

updates.

set the

observes

changes.

the

camera’s date and

Device

Configuration>Date & Time.

Enable NTP

Time Zone,select your time zone.

observes

changes.

Apply

next to Current Computer Time.

camera’s date and

Device

Configuration>Date & Time.

Time Zone,select your time zone.

time the

following

time

zone

and Daylight

connecttoan NTP

failure.

time

using an NTP

daylight

savings

time, check

End,select the start and end times for daylight savings.

Time, click Apply.

time to

your computer’s system

and click

Apply

at the bottom of the

daylight

savings

time, check

End,select the start and end times for daylight savings.

time manually:

ways:

NTP

by default, but you

Savings

server

and

server:

Adjust clock

The

Current

Time settings

automatically

for

time:

scr

een.

for

Device

Time

3. Un-check

4. If your region daylight saving

•

Under Start and

Set Manually,and use the on-screencale

5. Click

date.

Apply

6. Click

6.7.5 OSD

The OSD page

To configure

1. Click

Device

Check

the following options to enable

•

Device Name:

•

Channel

•

Channel Name:

•

Time:

time format under

Enable NTP

. The

allows you to configure the camera’s on-screen display text.

the

Configuration>OSD.

ID:

Show

and click

Apply

observes

daylight

changes.

End,select the start and end times for daylight savings.

camera updates to the newly entered

camera

OSD:

Display the

Show

the date and time on the

Device

the channel ID number.

the name of the channel set in the Camera menu.

Time

Format.

at the bottom of the

savings

time, check

OSDtext:

Name.

OSD.

ndar to set the time and

Select the desired date and

scr

Adjust clock

time.

een.

for

29 30

Page 21

Configuration

eLineTechnology.com

•

Cus

tom:

Createacustom

Custom

OSD.

Device

Channel

Name

Time

Custom

OSD

message.

Enter thecustom

3. Enter the desired

row 0 is shown at the top of the screen, andmoves down as the number increases. Text on column 0 is shown on the screen, and moves right as the column number increases.

Row

Column

Row

and

Column

for

Column # increases

enabled

OSD messages.

Row

increases

4. ClickOKto update the camera OSD.

6.7.6

Microphone

left

side of the

OSD

text under

Texton row

Configure microphone settings for listen-in audio. Self-powered microphone required (not included).

To configure microphone

1. Click

Device

Check disabl

3. Under between 1~100.

4. Click

Configuration>Microphone.

Enable Microphone

Microphone Volume,select the volume

save

6.7.7 BNC Video

Under

BNC

analog output or

6.7.8

Output(Device

Language

settings:

to enable listen-in audio or un-checkto

changes.

Output

Configuration>BNC

Off

to disable and click OK.

for

the

micr

Ouput),selectOnto enable

ophone

31 32

Change

the

and email alarms. Supported languages are English, Polish,

language

Chinese.

for the camera

OSD

display

(e.g.

time

and

date display)

Russian,

and

Page 22

Configuration

eLineTechnology.com

To change

1. Click

2. Under

the

language

Device

Language,select the desired language then clickOKto save

changes.

for the

Configuration>Language.

OSD and

email alarms:

6.8 Alarm Configuration

Alarm Configuration contains the following sub-menus:

•

Disk

Alarm

•

Motion

Alarm

•

Alarm I/O (Not supported)

•

I/O Alarm Linkage (Not supported)

•

Alarm Setting (Not supported)

6.8.1 Disk

Alarm

3. Under

Max Disk Space,enter the disk full percentage that will trigger an

alarm

(e.g. 80% Check

5. Click OK.

6.8.2 Motion

The

Motion alarm alarm setti ngs. SD

card or setting up local recording, motion recording using

a DiskFullAlarm will be triggered when the recording disk is

full).

Disk

Error Alarm to enable Disk

Alarm

page

You

FTP

recording) motion detection recording. For instructions on

Error Alarms.

allows you to configure camera motion detection

must enable motion detection to use local

see

“6.9 Local Record” on

NVMS,

see the

NVMS

manual on CD.

page 36.

(e.g.

For details on

microSD/

The

Disk Alarm the recording disk. Alarm.ADisk Full Alarm triggersanalarm when the recording disk is full exceeds

a certain percentage. A Disk Error Alarm triggers an alarm if

is an error

Alarms can be NVMS

manual on the CDfor details).

To configure Disk

1. Click Alarm

Check

Disk

33 34

page

allows

you

You

accessing

or writing to the recording disk.

viewed

using the Alarm Manager in

Alarms:

Configuration>Disk

Full Alarm to enable Disk Full Alarms.

to configure alarms if there is an issue

can configure a Disk Full Alarm or a Disk

Alarm.

NVMS (see

the

Error

with

there

To configure motion

1. Click Alarm

Check

Enable

detection:

Configuration>Motion

under

Motion

Parameter.

Alarm.

Page 23

Configuration

eLineTechnology.com

Schedule

3. Click

Time Setting menu opens.

NOTE:

If the

ockers.

Schedule

to configure a motion detection schedule.

Time Setting

does

not

open,

disable any popup

The

Schedule

6.9

Local

Record

Local Record contains the following sub-menus:

•

Record Policy

•

Record Directory

6.9.1 Record

Directory

is accessible and all settings

page,Status willbeOK

your recordings, use

have

been enteredcorrectly.

Status

To configureaNAS storage

1. Click

Local

Record>Record Directory.

Disk Name,select//.

2. Under

location:

3. Click

Modify

. The

Record Disk Path menu opens.

(see

“6.9.1 Record

NVMS

when

FTP

Select

Click

is select

Modify

4. Configure the following:

•

IP: Enter the IP address of the NAS.

•

Path:

Enter the

must be located directly under the root folder of the

•

Accounts:

•

Password/Confirm Password:

•

File

System:

•

Use

All

Uncheck the amount of

5. Click OK.

NAS

folder where

Enter the account user name for the NAS.

Enter the

NAS

Space:

Checktoenable

to limit the amount of

space

(in MB) available to the camera under Free Space.

video

files will be

Enter the account password for the NAS.

file system(cifs

the camera to record until the

space

or nfs).

the camera

can

NAS (e.g.

record

saved. NAS

/public

NASisfull.

on and

folder

enter

39 40

Page 26

Configuration

eLineTechnology.com

6. Set up recording using the Record Policy sub-menu

Directory” on m

NOTE:

selected if

anually

page 36). To access

accessyourNAS

the Record Directory

NAS

is accessible and all settings

your recordings, use

device.

page,

Status will be

have

6.9.2 Record

Policy

Status OK

(see

“6.9.1 Record

NVMS

when

NAS

been enteredcorrectly.

The

Record Policy menu allows you to set the NAS, and FTP video

To enable recording

1. Click

2. Configure recording storage

See

NOTE:

have

To Schedule all times, or, select

•

To Configure

Alarm, Channel.

5. Under Stream, select the stream to use for recording. Stream1 is

recommended if you want to record high quality recommended if you want to

Check

7. Under

overwrite the oldest recorded data once the available storage

recording parameters.

directly to a

“6.9.1 Record Directory” on page 36.

been enabled in Record

enable scheduled or continuous recording, check

If you select times. during all selected times in all 3 periods. Click configuring the recording schedule.

enable Motion Alarm Recording, check

microSD/SD

Local

The

Record Audio Storage Rule,select

location is filled. Or, select

to microSD/NAS/FTP:

Record>Record Policy.

camera will simultaneously record to all storageloca

Record.Select 7*24 H

Schedule Record,

schedule is

Pre-recordingandPost-recor

card,

locations in the

Dir

ectory

divided

Cycle

Record

click

into 3 periods,

save

Schedule Record

to enable audiorecord

microSD/SD

Once

configured, the

NAS,

and FTP.

Record

to record

to create a schedule

Schedule

and

Enable

ding

times.

bandwidth or storage space.

ing.

Write to enable the camerato

Save Days tosave video

memory card,

device can

Directory sub-menu.

Enable

video

and configure recording

the camera will record

under Alarm Record.

video,

under

continuously at

forrecord

when finished

Check

Motion

stream2 is

space

in the

for

tions

a set

record

that

ing.

41 42

Page 27

Configuration

eLineTechnology.com

number of must

8. Click

NOTE:To viewvideo

playback access video savedtoFTPorNAS by or

6.10

have

NAS

device.

Privacy

days

and enter the

sufficient storage

save

changes.

features,

from the SD/micr

see

Masking

the

NVMS

spacetosave

NumberofDays

the number of

oSDcard

manually

, FTP,orNAS,

accessing

manual on theCDfor

desired. Note that you

The Privacy not appear in recordings.

To configure privacy

1. Click

3. Click and drag inside the

Masking menu allows

Privacy

Check

Enable Privacy

areas will be shown as green rectangles. Right-click to delete the las created area.

areas:

Masking.

you

You

Masking.

to create upto

can cover up to 8%of the total image area.

video

area to configure privacy areas. Privacy

Privacy area

5 privacy areas

days

use details. your

entered.

NVMS’s

You

FTP serv

that

can

will

4. ClickOK.

of the

An error

total

message

image area.

appears if the masks configured

6.11 Network Service

Network

Service

contains the following sub-menus:

•

DDNS

•

PPPoE

6.11.1

The DDNS configuring DDNS

To configure DDNS

1. Click Network

3. Configure the

(Not supported)

DDNS

sub-menu allows yo u to configure

DDNS

account

Check

•

Provider:

•

Domain Name:

with either service. This forms part of the prefix name on the domain.

NOTE:

the

Domain Name,colon,and then the

Domain Name is mycamera.dyndns.org, use the address

http://mycamera.dyndns.org

•

User Name:

settings, you must register the camera for a free

(see

“5. Configuring Remote Connection” on

settings:

Servic

e>DDNS

User

Domain

:80

Name

Enable

DDNS.

foll

owing:

Select DunDNS or 3322 ddns services as required.

Enter the

Connect

to your camera using a web browser by entering

Enter your

DDNS

settings. Before

Name for your registered account

HTTP

port. For example, if the

you registered as

page

exceed

12).

http://

43 44

Page 28

Configuration

eLineTechnology.com

•

Password:

4. Click

6.12

Service

•

SMTP

•

Alarm Center (not supported currently)

6.12.1 SMTP (Email Alert

The SMTP alarms occur. Email alerts

Before setting up

•

Motion alarms mustbeenabled See

•

A static IP address must be configured for the camera and must be entered.

Enter the

save

Service

Center contains the following sub-menus:

settings.

Center

Password

you have set on the account.

Setup)

sub-menu allows you to configure email alerts when motion

“6.8.2 Motion Alarm” on

will

include a .jpg snapshot attachment.

email alerts

See

you must configure

“6.7.1 Local Network” on

before the camera will

page

34.

the following:

send

page

DNS

26.

alerts.

servers

To enable

1. Click

3. Configure the

4. Click

6.13

Privilege Manager allows you to configure user accounts and user groups.

Privilege Manager contains the following sub-menus:

email alerts:

Service

Check

•

SMTP

•

SMTP

•

User

•

Password:

•

Sender

•

Recipient

receive email

•

Attachment Image Quality:

High,Mid,orLow

•

Transport Mode:

STARTTLS)or select

alert.

•

Group

•

User

Center>SMTP

Enable

SMTP.

foll

owing:

Server

Address:

Server Port: Enter your server’s

Name:

Enter the

SMTP

E-mail

Address:Enter the email

alerts.

E-mail

Address

alerts.

Select the encryption type used by the server(SSL

No encrypted

OKtosave

Privilege

your settings. Click

Manager

Enter the address for your

SMTP

account user name.

account password.

address

1~5: Enter up to 5 email addresses that

Select the quality of the image attachments:

if your server

Send

SMTP

server.

port number.

that willbeused

does

not

use

testmail to send a test email

to send

encryption.

will

45 46

Page 29

Configuration

eLineTechnology.com

6.13.1

Group

The Group page user groups. Users obtain permissions from their group. group contains all permissions and cannot be deleted or edited.

To add

1. Click

NOTE:

2. Enter a name

(Privilege>Group) allows you to manage permissions

a user group:

Add

. The Add Group

If the

Add Group

for

menu appears.

does

not

appear,

the user group and click OK.

disable

The

any popupblockers.

Enter a group

and

name

click OK

3. Under

Group,select the newgroup.

Check

check or un-check

OKtosave

5. Click

To modify

the permissions

a user group:

you

would like to apply to this user group.

Select

All to select all or no permis

your new usergroup.

sions.

You

for

can

Administrators

1. Under

Group,select the group you would like to modify.

2. Click

Modify tochange

name and click OK. Change

1. Click Delete.

2. Select the group you would like to delete and click Delete.

permissions as

delete a user

NOTE:

If the Delete

ockers.

group:

The

Delete

the group name if

needed

Group

needed,

enter a newgroup

and click OK.

menu appears.

does

not appear,disable any popup

6.13.2 User

The

User

page accounts receive privileges system administrator, and has full

(Privilege>User) allows

based

youtomanage on their group. access

to all functi ons.

The

user accounts. User

admin account is the

47 48

Page 30

Configuration

eLineTechnology.com

To add

a user account:

1. Click

Add

2. Enter a User Name and

3. Under

5. Click

To modify

1. Select the user account under User and click Modify.

2. Modify the account details as

•

. The Add

NOTE:

If the

password under Confirm.

Group,select the desired user group

Check

Multi

from multipleloca a singleloca

OKtosave

a user account:

delete a user account:

Under

User,select the user

6.13.3 Unlocking User

The

admin account is the only account that can unlock user accounts have been entered 3 or more times.

To unlock

1. Login to the camera as admin.

locked out. User accounts are locked out if the wrong

a user account:

User window appears.

Add

User menu

to allow the user account tologinto the IPca

tion simultaneously or un-check to limit the accountto

tion at a

the new user account.

Password

time.

does

not

appear,

for

the account and repeat the

needed

and click OK.

account and

click

disable

for

this account.

Delete.ClickOKto

Accounts

any popupblockers.

mer

confirm.

that

password

2. Click

Privilege

Manager>User

Select the user

3. Under

User, select the locked

4. Click

Unlock

to unlock the account.

6.14 Protocol

Protocol contains the following sub-menus:

• Protocol

•

Security (Not supported)

NOTE:Donot check UserVerific

block

ONVIF

6.14.1

The

Protocol

settings.

6.15

Click

Device Restart.Click

software from detecting the ca

Protocol

page

(Protocol>Protocol) allows you to view

Device

Restart

user account.

ation in the Security sub-menu, as it may

Restart

then clickOKto restart the camera.

mer

Click Unlock

ONVIF

protocol

49 50

Page 31

Configuration

eLineTechnology.com

6.16

Default

Click

Default Settings.Click

factory default settings.

6.17

Sensor

The

Sensor Configuration menu is used to adjust camera image settings.

To configure camera image settings using the Sensor Configuration

•

Log into the camera using a right-click

Settings

Restore

The

camera will reboot.

Configuration

on the

video

area and select

then clickOKto restore the camera to

web

browser, and from the Live

Sensor

Config.

Right-click in the and select Sensor Config

video

Video

area

menu:

page,

•

Click

Save

save

setting changes.

•

Click

Reset

to revert to the last

•

Click

Factory Setting

defaults.

•

Click

Cancel

TIP:

Hold the mouse over the tabs to see the full name of the tab.

6.17.1 Image

Adjust the Brightness, Saturation, and Contrast settings for the image.

Adjust

6.17.2 Shutter

to revert all camera sensor settings to factory

to exit.

Control

saved

changes.

51 52

Adjust the camera shutter settings.

•

ShutterMode:

Select

AutoShutter

or FixedShutter.

Page 32

Configuration

eLineTechnology.com

•

MaxShutter:

is selected.

•

FixedShutter:

6.17.3 Gain

Sets

the upper limit of the shutter

Sets the shutter

Mode

speed

when FixedShutter is selected.

when AutoShutter

•

Night Color:

white during night mode or select in color during night mode.

6.17.5 Auto

Select

Iris

Black_Whitetohave

Multicolortohave

the camera switch to black and

the camera remain

Select gain mode and adjust gain settings.

•

Gain Mode:

•

MaxGain (dB):

•

FixedGain (dB):

6.17.4 Day/Night

Configure color settings for night mode.

53 54

Select

AutoGain

Select

Select the gain value when

or FixedGain.

the maximum

Mode

gain valuewhen

FixedGain

AutoGain

is selected.

Set Auto Iris settings.

•

Auto

Iris: Select

•

Iris

Speed:

6.17.6

Gamma

Adjust Gamma.

•

Gamma:

Select

to enable or

If Auto Iris is set to

gamma setting:

OFF

to disable.

ON,

select Auto Iris speed.

Standard,High,Middle,Low,or Dynamic.

Page 33

Configuration

eLineTechnology.com

6.17.7 AE Meter

Mode

•WBMode: set the white balance.

•

Manual Mode: Customized

6.17.9

Select

Autofor automatic white

Select a mode for the lighting conditions or select

and manually adjust the

WDR (solution may not feature this setting)

balanceorManual

RedGain

and BlueGain.

to manually

Set the Auto-Exposure Meter

•

Multi-Pattern:

symmetricall y.

•

Center-Weighted:

the image.

•

Vertical Center-Weighted:

vertical center of the image.

•

Horizontal Center-W

horizontal center of the image.

6.17.8 WB

Adjust White Balance.

55 56

Setting

Mode

from one of the

When

metering light, entire image is metered

When

metering light, priority is

When

metering light, priority is given to the

eighted:

When

metering light, priority is

following:

given

to the center of

given

to the

Configure settings for Digital

•

Control Mode:

to disable.

NOTE:

based turn Control

•

Working Mode:

few moving objects. SelectMC(Motion with multiple moving objects.

Select

Enabling Digital

on the lighting. If you noticecolordistortion, it isreco

Mode

to OFF.

Select

Wide

DLO

Wide

Dynamic Range.

to enable Digital

Dynamic

Range

(Digital

Side Overflow)

Wide

Dynamic

Range

may causecolordistortion

Compensation)

mmendedto

for environments

or OFF

with

Page 34

Configuration

eLineTechnology.com

6.17.10

Mirror

Enable/disable image

•

Mirror: Select mirror vertically, or Select

6.17.11 Noise

Configure noise filter settings.

•

Noise

Filter: Select

•

Max Level:

•

Level:

Select the level for manual noise

mirroring.

Horizontal

Picture Flip

to disable image

Filter (solution may not feature this setting)

Select the maximum level for automatic noise

to mirror the image horizontally, Vertical to

to mirror both horizontally

mirroring.

Auto

for automatic noise filtering or Manual.

filtering.

and

vertically.

filtering.

RESETTING TO FACTORY

Follow the steps below to revert all settings to factory defaults.

must be connectedtopower

Remove

the cameracove

screws

(2x)

andremovethe

cover.

camera

2. Press and hold the

reset button then reset the camera tofactory def

3. Re-attach the camera

and replace the ca cove

NOTE:

firmly in place when replacing the camera cover.

for

rel

ease

the buttonto

aults.

screws (2x).

Make

sure rubber seal is

5 seconds

whit

mer

to perform a

cover

DEFAULTS

factory

reset.

Press

and

reset to factory defaults

hold for

The

camera

5 seconds

57 58

Page 35

Troubleshooti ng

Dimensions

eLineTechnology.com

8. DIMENSIONS

Units:

Because

our

design

and

E&O.E.

59 60

99.9

49.2

100.0

products

are

specifications without notice

subjecttocontinuous improvement, product

and

without incurring

30.3

52.9

any

obligation.

9. TROUBLESHOOTING

Can’t find

Can’t connect

the

cameraIPaddress using NVMS

•

Make sure Ethernet and/orDCpower cables are correctly the camera.

•

Make

sure the

PoE

requirements

PoE

switch is powered on.

the

•

Make sure the camera’s

Command Prompt

Enter.If

press are not on the same network or camera is not connected

•

Connect

the monitor. IP address of IP address from the router. routerco

nfigur

•

Camera

set for static IP mode using anincorrect IP address. Bydefault, thecamera issetfor an IP address from your router. Reset the camera to factory default settings

by 5

seconds

•

See

steps above.

•

Verify the camera’s local IP address using one of the methods listed “4. Finding the Camera’s IP Address” on

switch orDCpower source meets the camera’s power

(class 3 PoE/450mA/5.4W/12V).

is on the same network as the camera. Ping the

address.Onyour

you

get the

if you receive replies.

BNC

test cable to the camera and the other end to a

The

monitor display shows the camera’s IP address. A default

192.168.0.120 may

ation.

removing the camera

or more.

to the

camera onaweb browser using local

PC,goto Start>Programs>Accessories

. Type

ping

then the

message

mean that the camera cannot obtain an

Check

DHCP

mode,

which

cover and

or other software:

If using

camera’s localIPaddress

“Request timed out,”

the Ethernet/power connections and

connected.

means

it will automatically obtain

pressing the reset button

page

connected

PoE,

make sure

PC and

camera

Camera is

IP address:

and

test

for

Page 36

Troubleshooti ng

eLineTechnology.com

Can’t connecttocamera onaweb browser usingaDDNS

•

Port forwarding not set up. Make sure the and Control port (default: camera’s local IP address.

•

Multiple cameras using same port number to connect. Configure each camera to use different ports (see

“6.7.2

Device

Can’t connecttocamera video onaweb

Video performs poorly on

User

Port” on

•

If using

IE, Player. For more information, see “6.3 Internet Explorer® Setup” on

•

Firefox), make sure latest version of

•

Insufficient bandwidth stream2 under Stream. Stream2 provides a conserve bandwidth and improve performance on low-bandwidth connections.

•

If using plug-in video performance.

•

User accounts are locked when the passwordhas been entered3times.Tounlock the interface select the locked user account and click account.

make sure to install

page

18.

If usingabrowser other than

IE,

click the

instead of Flash Player.

account

is locked:

admin. Click

30001)areforwardedonyour router tothe

page

27 for details on changing camera ports).

ActiveX

IE (e.g. Google

Mozilla

browser:

available

for high-quality stream1.

message above

account,

Privilege

ActiveX

HTTP

port (default: 80)

and

port forward the new ports

browser:

plug-in or

Adobe

the

video

may provide smoother

Manager>User. Under

Adobe

Chrome, AppleS afari,

Flash Player is installed.

lower-resolution

area to use

Unlock

to unlock the

address:

Flash

Select

ActiveX

incorrectly

web

User