How it Works
eLine Technology
Loading...
SIP-D
User Manual
36 pgs4.28 Mb0

eLine Technology SIP-D User Manual

NETWORK CAMERA GUIDE
Install
Browse
Use
01.BSM.11.0086801
Product Made in China under ISO9001 & ISO1400 standards
Manual Printed in China v1.0
Network Camera setup and installation guide. Browser setup with settings explained.
CAUTION
RISK OF ELECTRIC S HOCK
DO NOT
OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Network Dome
Camera
Instruction
English Version 1.0
Manual
REMOVE COVER. NO USER SERVICABLE PARTS
The
lightning fla sh with arrowhead symbol, within an equilateral triang le, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product’s enclosure that constitute a risk of electric shock.
The
exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the
accompanying
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO EXPOSE THIS UN IT TO RAIN OR
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF THE PLUG TO THE W IDE SLOT AND FULLY
literature
may be
the appliance.
MOISTURE.
INSIDE.
of sufficient magnitude to
NOT
INSERT.
General
Important
In addition to the careful atten tion
video
product, safety is a major factor in the design of
your your responsibility too. This sheet lists import ant information that will help to assure your enjoyment and proper use of the carefully before operating and using your
Installation
1.
Read and Follow Instructi ons - All the safety and
operating instructions should be video
product is operated. Follow all oper
ins
tr
uctions.
2.
Retain Instructions - The
instructions should be retained for future
3.
Heed Warnin gs - Comply with all warnings on the
video
product and in the operating ins
Polarization - Do not defeat the
4. safety purpose of the polarized grounding-type plug. A polarized plug has two blades with one wider t han the A grounding type plug has two
and
a third groundi ng prong.
blades The wide blade or t are provided for If the provided plug does not fit into consult an electrician for replacement of the obsolete outlet.
Power Sources -
5. operated only from the type of power indicated on the marking label. If the type of power supply to your your
video
dealer or local products intended to operate from battery power, other sources,
6.
Overloading - Do not overload wall outlets of
extension cords as this can or electric shock. cords,
frayed power
insulat ion, and broken plugs are
result
in a shock
may examine the cord, damage or deteriorated insulation, by your service te
7.
Power Cord Protection - Power supply cords should
be routed so that they are not or pinc hed by item s placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, exit from the
Safeguards
safety and operating
or
other.
he thir d prong
your safety.
This
video
product should be
power
refer
to the operating ins
result
Overloaded AC
cords,
damaged
or
fire hazard. Periodically
and if its
appearance
chnician.
likely to be walked on
and the point where they
video product.
devoted
to quality standards in the manufacturing process of
video
product and
video
r
ead before
the
ating
refer
ence.
tru
ctions.
your outlet,
sour
ce
you
are not sure of
loca
tion, consult
company.
For video
or
tru
ctions.
in the r isk of
fire
outlets, extension
or cracked wi
have
indicat
it re
They
plac
re
es
ed
dangerous.
every
instrument.
accessory
product.
equipment. Please read them
8.
Ventilation - Slots and openings in the case are
provided
for
ventilatio n to ensure reliable operat
of the
video
product and to protect it from
These openings
overheating. covered. The
openings should never be blocked by
video
placing the other similar surface. Thi s never be placed near or over a radiator or heat
This video
register. built-in installation such as a
l
ess
proper ventilation is provided or the video
un product manufacturer’s instructions fo
llow
ed.
9.
Attachments - Do not use attachments
r
ecommended by
cause
they may
10.
Camera Extension Cables – Check your extension your
11. Water
near water. For example, near a bath tub, wash bowl, kitchen si nk or laundry tub, in a w basement, near a swimming pool and the
Caution: Maintain elec trical safety. operated this uni t should bear the UL listing mark of CS A certification mark on the not be modified so as to defeat the safety This electr ical shoc k or fi re. If in doubt, contact qualified service personnel.
A
12. video cart, stand, tripod, or table. T he video serious product. Use this only with a cart, stand, bracket, or table manufacturer or sold wit h the mounting of the p roduct should manufacturer’s instructions and use a mounting accessory reco
a h
cable(s)
local authority regulations prior t o inst
and Moisture - Do not use this
equipm ent or accessories connected to
will
help
avoid any
ccessories -
Do not place this
equipm ent on an unstabl
equipment may fall, causing
damage
to the video
mmended by the manufacturer.
However,
safety is
must not be blocked
equipm ent on a bed, sofa, rug,
video
product should
product should not
the
video
azard.
video product
r
ecommended
be
placed in a
bookcase
or ra
have
been
unl
e
by th
video
follow the
ess
the rating of
video product
e
t
like.
Powerline
itself
and shou
fea
from
e
product. Any
product manufacturer as
to verify compliance with
accessory
potential hazard
tripod,
ion
or
ck
allation.
tures.
Service
13.
Servici ng - Do not attempt to service this video
equipment yourself as opening may
expose
you to dangerous voltage or other
Refer all servicing to q ualified ser vice
hazards. personnel.
Conditions Requiring Service - Unplug this video
14. product from the qual
ifi ed service personnel under the following
cond
itions:
•
When
the power supply cord or plug is damaged.
•
If liquid has
been
the
or
ld
video product.
•
If the
video
product has been
water.
•
If the
video
product
foll
owing the operat ing instructions. Adj ust only those controls that are covered by the operatin instructions. Improper adjustment of other contr
result
in
damage
may
work by a qual
extensive the
video
product to its normal operation.
•
If the
video
product
has been damaged.
•
When
the
video
in performance. This indi cates a need
15.
Replacement
Parts - When
required,
have
the serv ice technician verif y that the replacements used characteristics as the original parts. Use of replacements specified by the manufacturer can prevent fire, other hazards.
16.
Safety Check - Upon completion of
repairs to this
video technici an to perform safety checks by the manufacturer to determ ine tha t the video product is in safe operating
17. Wall or
Ceiling Mounting - The cameras provided
should be mounted to a w instructed in this gui
br
acke
mounting
18. Heat
-
The product should be situated heat sources such as radiators, heat stoves,
or other products (including amplifiers) that
produce
heat.
Precautions
or removing covers
wall outlet and
product exhibits a distinct change
ts.
refer
servicing to
spilled or objects
has been dropped
have
product, ask the service
de, using the provided
have fallen int
exposed
does
not operate normally by
and
will
often re
ified technician to restor
replacement parts are
the same safety
video product
elec
tric
any
r
eco
co
ndition.
all or ceiling only
regis
or the cabinet
to
quir
for
shock or
service
mme
away from
rain or
e
service.
as
ter
s,
or
nded
Use
19.
Cleaning - Unplug the
outlet before cleaning. aerosol cleaners. Use a damp cloth
Product and
20. combinat ion should be moved with care.
excessive
stops, cause the
verturn.
o
Object and Liquid Ent ry - Never push objects of any
21. kind into this they may touch dangerous voltage points
o
“short-out” elec
tric
shock. Never
video product.
22.
Lightning
product during a lightnin g storm, or when it is unattended and unused
g
unplug it antenna
ols
e
to the su
video
r
ges.
video Do
Cart
Combination - Video
force, and
video
product and cart combination to
video
product through openings as
parts that could
spill
- For
added
protection
from
the wall outlet and disconnect the
or cable system. This
product due to lightning and power lin e
product from the
not use li
quid cleaners
for clea
and ca
Quick
uneven
surfaces may
or
result
in a fire
liquid of any kind on the
for
this video
for long
periods of time,
will prevent damage
ning.
or
wall
rt
or
left
General
1. All warnings and instructions in this manual should be followed.
2.
3.
4. During lightning storms, or when the unit is not used for a
FCC CLASS A
Precautions
Remove
the plug from the outlet before cleaning.
dampened
enough
cloth for cleaning.
space
around the unit for ventilation. Slots and openings in the stor
NOTICE
water Keep
should not be blocked.
supply, antenna, and cables to protect the unit from elect rical
Do
not use liquid aerosol detergents.
l
ong
time, disconnec t the power
sur
ge.
NOTE
This equi pment has been tested and found to comply with the limits for a Class A digit al device pursuant to Part 15 of the FCC Rul es. These limits are designed to provide reasonable protection against interf erence wh en the equipmen t is operated in a comm ercial en vironment. This equipment generates, uses, and can radiate radi o frequency energy and, if not install ed and used in accordance wit h the manu instruction manual, m ay
esidential area is likely to cause harmful interferen ce, in which case you wil l be requ ired to correct the
in a r interf erence at your own expen se.
cause
harmful i nterference with r adio communications.
Operation
of thi s equipmen t
This
equipment
has been
certified
and
LVD.
Therefore, it is
cause
interference with othe r appliance usage.
However, usage which may result in damage to the unit, electrical shock and fi re hazard injury.
In order to improve the feature functions to
change
designated
it is imperative that the user follows the guidelines in this manual to
without noti ce from time to time.
found to comply with the limits regulated
to
provide
reasonable protection against interference
and
quality of this product, the specifications are
avoid
Use
age
cabinet
ha
rmful
facturer’
by FCC, EMC,
and
will not
improper
subje
Features
a
s
mpatible)
operation
and
•
HD
CMOS
•
720p or 1080p models with
•
Triple-streaming
•
Future proof
•
Compatible with popular third party
•
Power-over-Ethernet
•
ct
Backup options: micro SD card,
•
Mobile Apps: iPhone®, iPad®, Android™
•
Supports two-way audio
•
3.6mm – 12mm Vari-focal lens
•
Internal service video setup & micro SD
•
Multi-browser support:
•
3-axis gimbal
Progressive Scan
real-time
(H.264/MJPEG)
ONVIF 2.1
compliance
(PoE)
IE,
for versatile mounting
(25/30
fps)
(1.02
backwards co
VMS
operation,
software*
14Watt max/12V
FTP, NAS, local
Firefox, Safari, Chrome
*
Check Onvif com pliance o n for your sof tware.
TABLE OF
1.
Getting
Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
CONTENTS
1.1 Default Camera Username, Password, and Ports . . . . . . . . . . . 1
1.2 Camera Interior Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1
Functions of Status LED’s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.3
ONVIF
Compatibility and Included Software Overview . . . . . . . . 3
1.3.2
NVMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3.3 CD Cont ents
2.
Connection Camera
3. Finding
4.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
the
Camera’s
IP
Address
. . . . . . . . . . . . . . . . . . 8
4.1 Finding the Camera’s IP Address Using NVMS . . . . . . . . . . . . . . 9
4.2 Finding the Camera’s IP Address using
UPnP
4.3 Finding the Camera’s IP Address using Bonjour® in Mac OS®
4.4 Finding the Camera IP using the BNC Test Cable . . . . . . . . . . .
5.
Configuring Remote
5.1
Connecting
6.
Web Configuration
to a
Connection
DDNS
address using NVMS . . . . . . . . . . . . . . . 15
. . . . . . . . . . . . . . . . . . 12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.1 Supported Browsers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.2 Chrome, Firefox, and Safari Setup . . . . . . . . . . . . . . . . . . . . . .
6.3 Internet Explorer® Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.4
Web
Interface/Live
6.4.1
Live
Video
Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Configuring Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
6.5
6.4.2
Device
Video Overview
. . . . . . . . . . . . . . . . . . . . . . . 21
6.6 Stream Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Device
6.7
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.7.1
Local Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6.7.2 Device
Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.7.3
Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.7.4
Date & Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.7.5
OSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
6.7.6
Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
. 2
in Windows® 7. .9
10
. 11
. 17 . 18
. 24
6.7.7 BNC Video
6.7.8
6.8 Alarm Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6.8.1
6.8.2
6.9 Local Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
6.9.1
6.9.2
6.10
Privacy Masking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
6.11
Network Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
6.11.1
6.12 Service
6.12.1 SMTP
6.13
Privilege Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
6.13.1
6.13.2
6.13.3
6.14
Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
6.14.1
6.15 Device
6.16
Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
6.17
Sensor Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
6.17.1
6.17.2
6.17.3 Gain
6.17.4
6.17.5
6.17.6
6.17.7 AE
6.17.8 WB
6.17.9
6.17.10
6.17.11
7.
Resetting
8.
Dimensions Troubleshooting
9.
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Disk Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Motion Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Record Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Record Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
DDNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
(Email Alert Setup) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Unlocking User Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Image Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Shutter Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Day/Night Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Auto Iris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Gamma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Meter
Mode
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
WDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Noise Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
to
Factory
Defaults . . . . . . . . . . . . . . . . . . . 58
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Getting
Started
Getting
Started
1.
GETTING
The
system comes with the following
components:
•
1 x Camera
•
1 x Mounting Screw
•
1 x Allen Key
•
1 x
RJ45
Coupler
•
1 x
BNC
Test Cable
•
1 x Mounting Template
•
1 x Quick Start Guide
•
1 x Instruction Manual
•
1 x Software/Documentation CD
STARTED
Kit
BNC Test
1.1
Default Camera Username, Password, and
Username: admin
Password: admin
Ports: 80
(HTTP),
30001
(Control/Streaming), 8080
IP Address: address)
DHCP Enabled by Default
NOTE:
Once recommended to IP address changing in the Local N
you
etwork” on page 26.
have
completed the basic setup of the camera, it is
configure a static IP address. This
(Router will automatically assign IP
event
of a power failure. For details,
Mounting Screw
•
3 x 2.8in / 70mm screws
•
3 x 1.2in / 30mm screws
•
3 x 1.6in / 40mm anchors
Kit:
Allen Key
RJ45
Cable
Ports
(RTMP),
554 (RTSP)
will prev
ent the ca
see
Coupler
mer
“6.7.1
1.2
Camera
Interior Overview
Front of Camera
Camer
Rear of
a
analog
BNC output
a
Reset button
Termination cables
1 2
Getting
Started
Camera
Installation
1.3
ONVIF Compatibility and Included Software
This camera is popular more information on
NOTE:
cameras is available via Safari® browser only.
1.3.1
NVMS
•
NVMS cameras.
•
NVMS SD
•
NVMS
1.3.2 CD Tools
•
CD contents Folders
IP Search ; Search find IP Cameras and set IP address and gateway NTP Service Tool ; Time Sync Application: IP devices match one PC system time. FTPUpdater ; Firmware Update tool IP Support Help Files ; Website support help documents for common problems. RTSP Tool ; provides RTSP string command f. e.g VLC or Quick-time use SD Driver ; Ext2 driver for Windows XP to read sd Memory card on PC Onvif_Help ; documents on Onvif specifications Open the NTP service ; Windows XP only enables NTP time to be enabled. Adobe Flash Player ; Flash Video player for Windows IE plugin and Apple Mac OS Adobe AcrobatReader ; Windows and Max OS Acrobat Reader v10
Files: IP_series_bitrate_calculator.htm ; Simple storage calculator for IP devices NVMS_Install.exe ; NVR Software installation for PC NVMS_Manual_1.7.pdf ; Guide to use the NVMS Software SNMedia_Player.exe ; File Player for recorded files / backup files from devices / NVMS.
3 4
ONVIF v2.1
VMS’s and NVR’s*,
Provided software is
is a
client-only solution
NVMS
supports all the features of the camera. It
card recordings and camera setup over a local network.
manual is provided on the
compliant. It is designed for interoperability with backwards compatibility to
ONVIF,
visit www
.onvif
.org
PC
compatible only; Mac
that
is a free software provided on the CD.
supports up
CD.
to 36 IP
can access
Overview
ONVIF v.1.02.
OS® access
micro SD/
to the
with
For
2. CONNECTION
The
camera has the following termination cables:
1.
RJ45
Network
RJ45
Ethernet cable
Use
the included
12V DC
Interface:
using supported (class 3
NOTE:
Ethernet cable.
2.
Audio Input (RCA):
audio.
3.
Audio Output (RCA):
intercom/2-way audio.
DC12V (1A):
4.
polarity (+/-) marked on the power connector when connecting to power.
•
Minimum Power Requirement:
Connect
to a
router
(Cat5e
PoE
switch re
Connect
Connect
power input terminal. Make sure to follow corr
or better).
quir
RJ45
coupler to connect to male end of RJ45
RJ45
Coupler
to a self-powered microphone
to an amplifier or self-powered speaker fo
450mA / 5.4W.
or switch on your network
100Mhz
ed).
Make
sure to follow the correct polarity if connecting
DC
the camera to power connector.
power. Polarity is marked on the
connection. PoE
for listen-in
r
ect
Connection
Camera
Installation
3.
CAMERA
1
2
a
INSTALLATION
b
b
a
Initial camera removal
1a) Press down on the tab marked with
an arrow to lift up the dome cover slightly
1b) While pressing on tab, twist the
dome cover counter clockwise just a few degrees to release dome cover from back clips.
Lift off the cover.
Method 1 - Direct Attach Install
2a) Use included mounting template
to mark and pre-drill the required holes. Use included 2.8” screws to mount the camera directly to the mounting surface.
Skip next page to nalise installation
OR Method 2 - Camera Base Install 2b) Use the included mounting
template (Installation Option 1) to mark and pre-drill the required holes. Remove the camera base by unscrewing the base locking screws (indicated by padlock markings) and turn camera module approx. 5 degrees counterclockwise to detach camera base from the camera module. Install the base as indicated using the 1.2” screws.
3
2
b
c
a
b
d
3a) Reinsert camera
module into camera base by aligning the arrow notches, and turning camera module clockwise to lock into place.
3b) Reinstall the base
locking screws. (indicated by padlock markings)
Skip to next Page
Method 3 - Recess Mount
a) Cut semi ush mounting
hole into surface using
provided Semi-ush
Mount Cut-out Template.
Note: Always cut using the
inside line of the cutout template
b) Insert camera into cutout.
Make sure that the mounting arms are not extended.
c) Turn screwdriver
clockwise to unlock all of the 3 mounting arms.
d) Continue turning
clockwise to move mounting arms down until they make contact with inner mounting surface.
Note: Once mounting
arms have made contact with the inner mounting surface, do not apply too much pressure to avoid damaging surface.
5 6
Connection
Finding the
Camera’s IP
Address
3
Thumb Screw
Zoom
4
a) Re-attach the camera cover, using the thumb screw as a guide,
until it snaps into place.
b) Reattach dome cover.
Focus
a) Remove camera cover by
squeezing the back and front of the cover as indicated by the arrow indicators at the same time and lifting it up and away from the lens.
b) Insert the included video test
cable into the RCA jack and connect to a test monitor to set up camera set below.
c) Adjust camera viewing angle
and secure into place by tightening thumb screw using
a at head screwdriver. Adjust
zoom and focus as required.
Note: Lens adjustment levers
are by default in the locked position. Turn counter clockwise to unlock. Tighten levers to secure lens setting.
Addition
Insert a
video video connect to a test monitor to
camer
up running.
test cable into the
test cable te
rminals
a or find the IP when
and
set
4.
FINDING THE CAMERA’S
Use
the steps below to find the camera’s IP address and connect to the camera over the local area network Windows® 7, or Bonjour® in Mac OS®.
4.1
Finding
1. Install
Desktop.
2. Under User Name and
(
admin) and password (admin
the
Camera’s
NVMS
from the
The log in screen
CD. Now
Password, enter the default
appears.
).
(LAN)
IP
Address Using
Doubl
e-click
Click Login.
IP ADDRESS
using
NVMS, UPnP
the
NVMS
NVMS
Enter Admin Enter Admin
NVMS
3.
Detected camera IP addresses on the LAN appear in the
left
the
Click Login
opens and scans the local network
side of the screen with a icon.
for
connected ca
on
NVMS
icon ( ) on the
user name
mer
as.
Device
List on
Video Test Cable
Found IP address
camera
7 8
Finding the
Camera’s IP
Address
Finding the
Camera’s IP
Address
4. Click on a camera IP address in
5. Under
User Name, enter the user name Password, enter the password
Under Click Continue.
Device
List to lo
gin.
for
the camera (default: admin).
for
the camera (default: admin).
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Continue to login
6.
The
camera appears under the camera IP address. Click and drag the
camera to the display grid to open
it.
Click and drag the camera to the display grid to open
it
NOTE:
For detailed instructions on using
manual on the CD.
4.2
Finding
Windows®
NOTE:
To use
and
computer must be on the
by
default,
manual
for details).
the
Camera’s
7
this method, your
and can be enabled/disabled using
same
NVMS,
see the NVMS
IP
Address using UPnP
router
must support
network.
UPnP
NVMS (check
in
UPnP and
is enabled in the ca
the ca
the NVMS
mer mer
1. Click
under Network
Start>Computer>Network. The
Infrastructure.
camera’s IP address appears
Double-click to open the camera
Network
2. Double-click the camera to open it in your default browser.
3. Under User Name and
admin) and Password (default:
(default:
4.3
Finding
Mac
OS®
NOTE:
a a
network. Bonjour® is enabled by default, and can be enabled/disabl using
1.
Open
the
To use
this method, the camera
NVMS
(check the
Safari® browser and click the Bookmarks button ( ).
Password, enter the camera’s User Name
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login
Camera’s
NVMS
admin) and click
IP
Address using
and
computer must
manual
for details).
Login
.
Bonjour® in
be on
the same
ed
9 10
Finding the
Camera’s IP
Address
Configuring
Remote
Connection
Control
30001
30001
100
2. Click
Bonjour
. The
list.
3. Double-click the camera to open it in
camera’s IP address appears in the Bonjour Devices
Bookmarks button
Bonjour
4. Under User Name and
(default:
admin) and Password (default:
Password, enter the camera’s User
Enter Camera User Name (default: admin) Enter Camera Password (default: admin)
Click Login
4.4
Finding
When on the test monitor. test cable.
NOTE:
cannot obtain an IP address from the connections and
the
the
BNC
test
The
default IP address of
Camera
cable
is
The
camera must
router co
IP
connected
nfigur
Saf
ari®.
Double-click the camera’s IP address
admin) and click
using
the
to the camera, the
be connected
192.168.0.120 router.
ation.
Check
BNC Test
to power to use the BNC
is shown if the ca
Name
Login
.
Cable
IP address
the Ethernet/power
is shown
mer
a
5. CONFIGURING REMOTE
Follow the steps below to configure your camera for connections over the Internet using a web browser,
Step
1 of 6:
Locate
the
•
See
“4. Finding the Camera’s IP Address” on
Step
2 of 6: Port
You
need to enable port forwarding for the following ports on your router to
the camera’s local IP address:
•
HTTP
•
Control Port (default: 30001)
NOTE:
access, you use the same port number.
NOTE:
your installation has special re
There are two methods for port forwarding:
• You can
for details. An example of a port forwarding screen is shown below.
Forward your
Port (default: 80)
If you are configuring multiple IP cameras
must
change
Port forwarding the
manually port forward your router.
NVMS,
camera’s local
router:
the ports
RTSP
and
quir
or other
IP address:
for
ements.
CONNECTION
VMS
software.
page 8
.
for
camera.
Two
ports is not
individual re
cameras cannot
necessary
each
RTMP
See your router’s user manual
mot
e
unless
HTTP
80
80
100
11 12
Loading...
+ 25 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use