Product Made in China under ISO9001 & ISO1400 standards
Manual Printed in China v1.0
Network Camera setup and installation guide. Browser setup with settings explained.
CAUTION
RISK OF ELECTRIC S HOCK
DO NOT
OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
eLine Technology
eLineTechnology.com
IR Bullet Network
Camera
Instruction
English Version 1.0
Manual
REMOVE COVER. NO USER SERVICABLE PARTS
The
lightning fla sh with arrowhead symbol, within an
equilateral triang le, is intended to alert the user to the
presence of un-insulated "dangerous voltage" within the
product’s enclosure that
constitute a risk of electric shock.
The
exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
accompanying
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO
EXPOSE THIS UN IT TO RAIN OR
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF THE PLUG TO THE W IDE SLOT AND FULLY
literature
may be
the appliance.
MOISTURE.
INSIDE.
of sufficient magnitude to
NOT
INSERT.
General
eLine Technology
eLineTechnology.com
Important
In addition to the careful atten tion
video
product, safety is a major factor in the design of
your
your responsibility too. This sheet lists import ant information that will help to assure your
enjoyment and proper use of the
carefully before operating and using your
Installation
1.
Read and Follow Instructi ons - All the safety and
operating instructions should be
video
product is operated. Follow all oper
ins
tr
uctions.
2.
Retain Instructions - The
instructions should be retained for future
3.
Heed Warnin gs - Comply with all warnings on the
video
product and in the operating ins
Polarization - Do not defeat the
4.
safety purpose of the polarized
grounding-type plug.
A polarized plug has two blades
with one wider t han the
A grounding type plug has two
and
a third groundi ng prong.
blades
The wide blade or the thi rd prong
are provided for
If the provided plug does not fit into
consult an electrician for replacement of the
obsolete outlet.
Power Sources -
5.
operated only from the type of power
indicated on the marking label. If
the type of power supply to your
your
video
dealer or local
products intended to operate from battery power,
other sources,
6.
Overloading - Do not overload wall outlets of
extension cords as this can
or electric shock.
cords,
frayed power
insulat ion, and broken plugs are
result
in a shock
may
examine the cord,
damage or deteriorated insulation,
by your service te
7.
Power Cord Protection - Power supply cords should
be routed so that they are not
or pinc hed by item s placed upon or against them,
paying
particular attention to cords at plugs,
convenience receptacles,
exit from the
Safeguards
safety and operating
or
other.
your safety.
This
video
product should be
power
refer
to the operating ins
result
Overloaded AC
cords,
damaged
or
fire hazard. Periodically
and if its
appearance
chnician.
likely to be walked on
and the point where they
video product.
devoted
to quality standards in the manufacturing process of
video
product and
video
r
ead before
the
ating
refer
ence.
tru
ctions.
your outlet,
sour
ce
you
are not sure of
loca
tion, consult
company.
For video
or
tru
ctions.
in the r isk of
fire
outlets, extension
or cracked wi
have
indicat
it re
They
plac
re
es
ed
dangerous.
every
instrument.
accessory
product.
equipment. Please read them
8.
Ventilation - Slots and openings in the case are
provided
for
ventilatio n to ensure reliable operat
of the
video
product and to protect it from
These openings
overheating.
covered. The
openings should never be blocked by
video
placing the
other similar surface. Thi s
never be placed near or over a radiator or heat
This video
register.
built-in installation such as a
l
ess
proper ventilation is provided or the video
un
product manufacturer’s instructions
fo
llow
ed.
9.
Attachments - Do not use attachments
r
ecommended by
cause
they may
10.
Camera Extension Cables –Check
your extension
your
11. Water
near water. For example, near a bath tub, wash
bowl, kitchen si nk or laundry tub, in a w
basement, near a swimming pool and the
Caution: Maintain elec trical safety.
operated
this uni t should bear the UL listing mark of CS A
certification mark on the
not be modified so as to defeat the safety
This
electr ical shoc k or fi re. If in doubt, contact qualified
service personnel.
A
12.
video
cart, stand, tripod, or table. T he
video
serious
product. Use this
only with a cart, stand,
bracket, or table
manufacturer or sold wit h the
mounting of the p roduct should
manufacturer’s instructions and use a mounting
accessory reco
a h
cable(s)
local authority regulations prior t o inst
and Moisture - Do not use this
equipm ent or accessories connected to
will
help
avoid any
ccessories -
Do not place this
equipm ent on an unstabl
equipment may fall, causing
damage
to the video
mmended by the manufacturer.
However,
safety is
must not be blocked
equipm ent on a bed, sofa, rug,
video
product should
product should not
the
video
azard.
video product
r
ecommended
be
placed in a
bookcase
or ra
have
been
unl
e
by th
video
follow the
ess
the rating of
video product
e
t
like.
Powerline
itself
and shou
fea
from
e
product. Any
product manufacturer as
to verify compliance with
accessory
potential hazard
tripod,
ion
or
ck
allation.
tures.
Service
13.
Servici ng - Do not attempt to service this video
equipment yourself as opening
may
expose
you to dangerous voltage or other
Refer all servicing to q ualified ser vice
hazards.
personnel.
Conditions Requiring Service - Unplug this video
14.
product from the
qual
ifi ed service personnel under the following
cond
itions:
•
When
the power supply cord or plug i s damaged.
•
If liquid has
been
the
or
ld
video product.
•
If the
video
product has been
water.
•
If the
video
product
foll
owing the operat ing instructions. Adj ust only
those controls that are covered by the operatin
instructions. Improper adjustment of other contr
result
in
damage
may
work by a qual
extensive
the
video
product to its normal operation.
•
If the
video
product
has been damaged.
•
When
the
video
in performance. This indi cates a need
15.
Replacement
Parts - When
required,
have
the serv ice technician verif y that the
replacements used
characteristics as the original parts. Use of
replacements specified by the
manufacturer can prevent fire,
other hazards.
16.
Safety Check - Upon completion of
repairs to this
video
technici an to perform safety checks
by the manufacturer to determ ine tha t the video
product is in safe operating
17. Wall or
Ceiling Mounting - The cameras provided
should be mounted to a w
instructed in this guide, using the pr
br
acke
mounting
18. Heat
-
The product should be situated
heat sources such as radiators, heat
stoves,
or other products (including amplifiers) that
produce
heat.
Precautions
or removing covers
wall outlet and
product exhibits a distinct change
ts.
refer
servicing to
spilled or objects
has been dropped
have
product, ask the service
have fallen int
exposed
does
not operate normally by
and
will
often re
ified technician to restor
replacement parts are
the same safety
video product
elec
tric
any
r
eco
co
ndition.
all or ceiling only
ovided
regis
or the cabinet
to
quir
for
shock or
service
mme
away from
rain or
e
service.
as
ter
s,
or
nded
Use
19.
Cleaning - Unplug the
outlet before cleaning.
aerosol cleaners. Use a damp cloth
Product and
20.
combinat ion should be moved with care.
excessive
stops,
cause the
verturn.
o
Object and Liquid Ent ry - Never push objects of any
21.
kind into this
they may touch dangerous voltage points
o
“short-out”
elec
tric
shock. Never
video product.
22.
Lightning
product during a lightnin g storm, or when it is
unattended and unused
g
unplug it
antenna
ols
e
to the
su
video
r
ges.
video
Do
Cart
Combination - Video
force, and
video
product and cart combination to
video
product through openings as
parts that could
spill
- For
added
protection
from
the wall outlet and disconnect the
or cable system. This
product due to lightning and power lin e
product from the
not use li
quid cleaners
for clea
and ca
Quick
uneven
surfaces may
or
result
in a fire
liquid of any kind on the
for
this video
for long
periods of time,
will prevent damage
ning.
or
wall
rt
or
left
eLine Technology
eLineTechnology.com
General
1. All warnings and instructions in this manual should be followed.
2.
3.
4. During lightning storms, or when the unit is not used for a
FCC CLASS A
Precautions
Remove
the plug from the outlet before cleaning.
dampened
enough
cloth for cleaning.
space
around the unit for ventilation. Slots and openings in the stor
NOTICE
water
Keep
should not be blocked.
supply, antenna, and cables to protect the unit from elect rical
Do
not use liquid aerosol detergents.
l
ong
time, disconnec t the power
sur
ge.
NOTE
This equi pment has been tested and found to comply with the limits for a Class A digit al device pursuant to
Part 15 of the FCC Rul es. These limits are designed to provide reasonable protection against
interf erence wh en the equipmen t is operated in a comm ercial en vironment. This equipment generates, uses,
and can radiate radi o frequency energy and, if not install ed and used in accordance wit h the manu
instruction manual, m ay
in a residentia
interf erence at your own expen se.
cause
l area
harmful i nterference with r adio communications.
is likely to cause harmful interferen ce, in which case you wil l be requ ired to correct the
Operation
of thi s equipmen t
This
equipment
has been
certified
and
LVD.
Therefore, it is
cause
interference with othe r appliance usage.
However,
usage which may result in damage to the unit, electrical shock and fi re hazard injury.
In order to improve the feature functions
to
change
designated
it is imperative that the user follows the guidelines in this manual to
without noti ce from time to time.
found to comply with the limits regulated
to
provide
reasonable protection against interference
and
quality of this product, the specifications are
by FCC, EMC,
avoid
Use
age
cabinet
ha
rmful
facturer’
and
will not
improper
subje
Features
a
s
and
ct
•
HD
CMOS
•
720p or 1080p models with
•
Triple-streaming
•
Future proof
•
Compatible with popular third party
•
Power-over-Ethernet
•
Backup options: micro SD card,
•
Mobile Apps: iPhone®, iPad®, Android™
•
Supports two-way audio
•
3.6mm – 12mm Vari-focal lens
•
Screw panel Vari-focal adjustment & service video setup & micro SD
Access panels. Are at underside of the camera body, using the supplied key
you open by unlocking the two screws, note that each has a rubber hold so will
not fall off. Model with fixed focus lens has no front panel adjustment as if not
required.
With Micro sd Card slot*. Camera reset & service video connector.
Interior Overview
1.1
Default Camera Username, Password, and
Username: admin
Password: admin
Ports: 80
(HTTP),
IP Address:
address)
NOTE:
Once
recommended to
IP address changing in the
Local Networ k ” on page 26.
12
30001
(Control/Streaming), 8080
DHCP Enabled by Default
you
have
completed the basic setup of the camera, it is
configure a static IP address. This
event
of a power failure. For details,
Cable
BNC Test
Ports
(RTMP),
554 (RTSP)
(Router will automatically assign IP
will prev
ent the ca
mer
see
“6.7.1
1.2.1 Functions of Status
•
a
No LED status available on this model.
LED’s
Camera
Installation
Getting
Started
eLine Technology
eLineTechnology.com
1.3
ONVIF Compatibility and Included Software
This camera is
popular
more information on
NOTE:
cameras is available via Safari® browser only.
1.3.1
NVMS
•
NVMS
cameras.
•
NVMS
SD
•
NVMS
1.3.2 CD Tools
•
CD contents Folders
IP Search ; Search find IP Cameras and set IP address and gateway
NTP Service Tool ; Time Sync Application: IP devices match one PC system time.
FTPUpdater ; Firmware Update tool
IP Support Help Files ; Website support help documents for common problems.
RTSP Tool ; provides RTSP string command f. e.g VLC or Quick-time use
SD Driver ; Ext2 driver for Windows XP to read sd Memory card on PC
Onvif_Help ; documents on Onvif specifications
Open the NTP service ; Windows XP only enables NTP time to be enabled.
Adobe Flash Player ; Flash Video player for Windows IE plugin and Apple Mac OS
Adobe AcrobatReader ; Windows and Max OS Acrobat Reader v10
Files:
IP_series_bitrate_calculator.htm ; Simple storage calculator for IP devices
NVMS_Install.exe ; NVR Software installation for PC
NVMS_Manual_1.7.pdf ; Guide to use the NVMS Software
SNMedia_Player.exe ; File Player for recorded files / backup files from devices /
NVMS.
34
ONVIF v2.1
VMS’s and NVR’s*,
Provided software is
is a
client-only solution
NVMS
supports all the features of the camera. It
card recordings and camera setup over a local network.
manual is provided on the
compliant. It is designed for interoperability
with backwards compatibility to
ONVIF,
visit www
.onvif
.org
PC
compatible only; Mac
that
is a free software provided on the CD.
supports up
CD.
to 36 IP
can access
Overview
ONVIF v.1.02.
OS® access
micro SD/
to the
with
For
2. CONNECTION
The
camera has the following termination cables:
1.
RJ45
Network
RJ45
Ethernet cable
Use
the included
12V DC
Interface:
using
supported (class 3
NOTE:
Ethernet cable.
2.
Audio Input (RCA):
audio.
3.
Audio Output (RCA):
intercom/2-way audio.
DC12V (1A):
4.
polarity (+/-) marked on the power connector when connecting to power.
•
Minimum Power Requirement:
Connect
to a
router
(Cat5e
PoE
switch re
Connect
Connect
power input terminal. Make sure to follow corr
or better).
quir
RJ45
coupler to connect to male end of RJ45
RJ45
Coupler
to a self-powered microphone
to an amplifier or self-powered speaker fo
450mA / 5.4W.
or switch on your network
100Mhz
ed).
Make
sure to follow the correct polarity if connecting
the camera to
power connector.
DC
power. Polarity is marked on the
connection. PoE
for listen-in
r
ect
Finding the
Camera’s IP
Address
Wall
Connection
eLine Technology
eLineTechnology.com
3.
CAMERA
1.
Use
drill holes for mounting
Use Supplied wall plugs.
Make
the camera to
power connector.
the included drill template to
INSTALLATION
sure to follow the correct polarity if connecting
DC
power. Polarity is marked on the
2.
Attached
Camera to surface using the supplied screws.
56
Finding the
Camera’s IP
Address
Finding the
Camera’s IP
Address
Loosen
Tighten
Locking screw
eLine Technology
eLineTechnology.com
3. Connect the cable of power supply.
4. Loosen the bracket locking ring to adjust the camera position.
5. Lock into place, remove underside adjust the focus / zoom.
a. Fixed Lens model has not focus/zoom adjustment.
4.
FINDING THE CAMERA’S
Use
the steps below to find the camera’s IP address and connect to the
camera over the local area network
Windows® 7, or Bonjour® in Mac OS®.
4.1
Finding
1. Install
Desktop.
2. Under User Name and
(
admin) and password (admin
the
NVMS
from the
The log in screen
NVMS
opens and scans the local network
3.
Detected camera IP addresses on the LAN appear in the
the
left
side of the screen with a icon.
Found
camera
IP address
(LAN)
Camera’s
Click Login
IP
CD. Now
Doubl
appears.
Password, enter the default
).
Click Login.
IP ADDRESS
using
NVMS, UPnP
Address Using
e-click
the
NVMS
NVMS
Enter Admin
Enter Admin
for
connected ca
on
NVMS
icon ( ) on the
user name
mer
as.
Device
List on
78
Finding the
Camera’s IP
Address
Finding the
Camera’s IP
Address
eLine Technology
eLineTechnology.com
4. Click on a camera IP address in
5. Under
User Name, enter the user name
Password, enter the password
Under
Click Continue.
Device
List to lo
gin.
for
the camera (default: admin).
for
the camera (default: admin).
Enter Camera User Name
(default: admin)
Enter Camera Password
(default: admin)
Click Continue to login
6.
The
camera appears under the camera IP address. Click and drag the
camera to the display grid to open
it.
Click and drag the
camera to the display
grid to open
it
NOTE:
For detailed instructions on using
manual on the CD.
4.2
Finding
Windows®
NOTE:
To use
and
computer must be on the
by
default,
manual
for details).
the
Camera’s
7
this method, your
and can be enabled/disabled using
same
NVMS,
see the NVMS
IP
Address using UPnP
router
must support
network.
UPnP
NVMS (check
in
UPnP and
is enabled in the ca
the ca
the NVMS
mer
mer
1. Click
under Network
Start>Computer>Network. The
Infrastructure.
camera’s IP address appears
Double-click to open
the camera
Network
2. Double-click the camera to open it in your default browser.
3. Under User Name and
admin) and Password (default:
(default:
4.3
Finding
Mac
OS®
NOTE:
a
a
network. Bonjour® is enabled by default, and can be enabled/disabl
using
1.
Open
the
To use
this method, the camera
NVMS
(check the
Safari® browser and click the Bookmarks button ( ).
Password, enter the camera’s User Name
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login
Camera’s
NVMS
admin) and click
IP
Address using
and
computer must
manual
for details).
Login
.
Bonjour® in
be on
the same
ed
910
Configuring
Remote
Connection
Control
30001
30001
100
Finding the
Camera’s IP
Address
eLine Technology
eLineTechnology.com
2. Click
Bonjour
. The
list.
3. Double-click the camera to open it in
camera’s IP address appears in the Bonjour Devices
Bookmarks
button
Bonjour
4. Under User Name and
(default:
admin) and Password (default:
Password, enter the camera’s User
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login
4.4
Finding
When
the
on the test monitor.
test cable.
NOTE:
cannot obtain an IP address from the
connections and
the
Camera
BNC
test
cable
The
The
default IP address of
router co
IP
is
connected
camera must
nfigur
Saf
ari®.
Double-click the camera’s IP address
admin) and click
using
the
to the camera, the
be connected
192.168.0.120
router.
ation.
Check
BNC Test
to power to use the BNC
is shown if the ca
Name
Login
.
Cable
IP address
the Ethernet/power
is shown
mer
a
5. CONFIGURING REMOTE
Follow the steps below to configure your camera for connections over the
Internet using a web browser,
Step
1 of 6:
Locate
the
•
See
“4. Finding the Camera’s IP Address” on
Step
2 of 6: Port
You
need to enable port forwarding for the following ports on your router to
the camera’s local IP address:
•
HTTP
•
Control Port (default: 30001)
NOTE:
access, you
use the same port number.
NOTE:
your installation has special re
There are two methods for port forwarding:
• You can
for details. An example of a port forwarding screen is shown below.
Forward your
Port (default: 80)
If you are configuring multiple IP cameras
must
change
Port forwarding the
manually port forward your router.
NVMS,
camera’s local
router:
the ports
RTSP
and
quir
or other
IP address:
for
ements.
CONNECTION
VMS
software.
page 8
.
for
camera.
Two
ports is not
individual re
cameras cannot
necessary
each
RTMP
See your router’s user manual
mot
e
unless
HTTP
80
80
100
1112
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.