eLine Technology HDSDI-MD2-4 User Manual

- FLK : Select this when you experience picture flicker

- AUTO : Select this mode to control the shutter speed automatically. Shutter speed is automatically controlled depending on the brightness of the screen. ▶ AGC : You can adjust it Low, Middle and High level.

OSD Manual

■ Function Menu Structure

LENS

EXPOSURE

WHITE BAL

DAY & NIGHT NR

SPECIAL

ADJUST

RESET EXIT OFF, LOW, MIDDEL, HIGH 4Step

■ DC ■ VIDEO ■ MANUAL

■ SHUTTER ■ AGC ■ SENS-UP ■ BRIGHTNESS

■ ACCE ■ DEFOG ■ BACKLIGHT ▶ BRIGHTNESS : You can control the brightness by using the Left and Right button in Manual Lens mode.

■ ATW ■ AWC→SET ■ MANUAL ▶ ACCE : If there are bright area and dark area on the screen at the same time,

■ INDOOR ■ OUTDOOR

■ COLOR ■ AUTO ■ EXT ■ B/W

■ 2DNR ■ 3DNR ■ SMART NR

■ CAM TITLE ■ D-EFFECT ■ MOTION ■ PRIVACY

■ LANGUAGE ■ DEFECT ■ RS485

■ SHARPNESS ■ MONITO

■ NTSC/PAL

■ FACTORY ▶ DEFOG : Carry out defog function

How to use the camera

Notes

⊙ An item with the , you can move to sub menu pressing SET button ⊙ An item with the -- -, icon is unavailable due to function settings.

LENS

● Using this function, you can control screen brightness ▶ SENSE-UP : When it is night of dark, the camera automatically detects the light level and maintains a clear picture.

1. When the SETUP menu screen is displayed, select 'LENS' by using the Up and - SELECT : AREA1, AREA2, AREA3, AREA4 Down buttons so that the arrow indicates 'LENS'. - DISPLAY : SELECT AREA ON/OFF ▶ DC/VIDEO : Select Auto Iris Lens ▶ MANUAL : Select Manual Lens

EXPOSURE

1. When the SETUP menu screen is displayed, select 'LENS' by using the Up and - DEFAULT : Factory reset Down buttons so that the arrow indicates 'LENS'. ▶ SHUTTER : Auto / Manual

※ Out Door : Auto ※ In door : NTSC : 1.3M→1/60 , 2.1M→1/30 PAL : 1.3M→1/50 , 2.1M→1/25

Function Me nu

■ OSD ■ LSC

The higher the gain level, the brighter the screen but the higher the noise. ▶ SENSE-UP : When it is night of dark, the camera automatically detects the light level and maintains a clear pictur.

Notes

This function Deactivates when the AGC "OFF", DAY&NIGHT "OFF"

OFF : Deactivates the Sense-up function. AUTO : You can adjust br ightness by increasing or decreasing the shutter speed

- 1.3M : x2 ~ x30, 2.1M : x2 ~ x60

* Note that the higher the zoom level, the brighter the screen, but the more likely it

is that an after-image will appear.

* Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation when the zoom

this function makes both areas to be in clear image OFF, LOW, MIDDEL, HIGH 4step

ACCE ON

▶ BLC : This function allows you to get a clear pictures of objects even the objects in strong backlight.

- BLC : Enables a user to directly select a desired area from a picture, and to view the area more clearly.

- GAIN : LOW, MIDDLE, HIGH

- AREA : Area Set(Size & Position)

- DEFAULT : Factory reset

- LEVEL : Masking Level Set

- MODE : DAY and NIGHT

- BLACK MASK : Mask OFF

ACCE OFF

※ AREA Set

- Use Narow Button to set Size and Position

WHITE BALANCE (White Bal.) SPECIAL

played,

py , y g p

pp,p

1. When SETUP menu screen is displayed, select 'White Bal.' by using Up and 1. When the SETUP menu screen is displayed, select 'SPECIAL' by using Up and Down buttons so that t he arrow indicates White Bal. Down buttons so that the arrow indicates 'SPECIAL' ※ Select one of the following 6 modes, as appropriate for your purpose ▶ AWB : Select this when the color temperature is between 2,400ºK and 11,000ºK. ▶ CAM TITLE : If you enter a title, the title will be appear on the monitor. ▶ MANUAL : Select this to fine-tune White Balance manually. Set White Balance first by using ① the ATW or AWC mode. After that switch to MANUAL mode. Adjust the [BLUE] and [RED], according to the changing of color on the screen ▶ OUTDOOR : Select this when th e color temperature is around 5,100ºK. ▶ INDOOR : Select this when the color temperatur e is around 3,100ºK. ② Set it to 'On' by using Left and Right buttons. ▶ AWC-> SET : To find the optimal setti ng for the current lumin a nce environment in this ③ Use the 4 direction buttons to move to a desired letter and select the letter by pressing the mode, set the point the camera towards a sheet of white paper and press SET button. Repeat this to enter multiple letters. You can enter up 15 letters. the SET button. If the environment changes, readjust it.

Notes

⊙ White balance may not work properly under the following conditions.

In this case, select the AWC mode.

① When color temperatu r e of environment surrounding the subject i s ou t of the control r a nge

DAY&NIGHT

● You can display pictures in Color or Black and White.

1. When the SE TUP menu screen is dis and Down buttons so that the arrow indicates 'DAY/NIGHT' the SET button to return to the SPECIAL menu. ▶ COLOR : The picture is always displa yed i n color. ▶ AUTO : The mode is switched to color in a normal en vironment , but switches to B/W mode ▶ D-EFFECT when ambient illumination is low. To set up the switching time or speed for auto mode, press the SET button * Freeze : You can stop the image or reactivate it.

- Delay : You can select the duration time about changing the day/night mode. * MIRROR ▶ EXT : This mode allows you to apply a desired filter to extern al signals.(ICR Type - OPTION) ▶ BW : The picture is always displ ayed i n B/W.

● This function reduces the background noise in a low luminance environment

1. When the SETUP menu screen is displayed, select NR by using the Up and - PIP : PIP DISPLAY ON/OFF Down buttons so that the arrow indicates NR.

2. Select a desired mode using the Left and Right buttons. ▶ OFF : Deactivates NR. Noise is not red uced. ▶ ON : Activates NR so that noise is reduced.

3. Set the NR mode to 'ON' andpress the SET button. Then you can adjust the - DEFAULT : Factory Reset Noise reduction level. * NEG IMAGE : you can flip the color on screen.

select 'DAY/NIGHT' by using the U

2. Select a desired mode using the Up and Down buttons

If the SPECIAL menu screen is displayed, use the Up and Down buttons so that the arrow indicates 'CAM TITLE'

Notes

⊙ When the CAM TITLE menu is 'OFF', no title will be displayed on the monitor screen even if you

enter one.

Notes

⊙ If you entered wrong letter……

If you move the cursor to CLR and press the SET button, all the letters are deleted. To edit a leeter, change the cursor to the bottom left arr ow and press the SE T button. Move the curson over the letter to be edited, move the cursor to the letter to be inserted and then press SET button.

④ Enter a title, move the cursor to 'POS' and press the SET button. The entered title appears on the screen. Select the position to display the title on the screen by using the 4 directoin

buttons and press the SET button. When the position is determined, sel e ct 'E ND' and press

- Mirror : you can flip the image vertically on the scr een.

- V-Flip : you can flip the image vertically and hori zontally both.

- Rotate : you can flip the imate horizont ally on the screen. * D-ZOOM

- D-ZOOM : 1.3M → x2.0 ~ x62.0

2.1M → x2.0 ~ x32.0

- PAN&TILT : SET to change PIP Position Press SET button 2 times to move the position

▶ MOTION : If you connect an alarm device to this camera, you can monitor activity because a signal is generated by the camera whenever motion is detected. The motion detection signal is output through the MD OUT port.

+ 1 hidden pages