eLine Technology HDSDI-412 User Manual
H.264 NETWORK Embedded DVR
User Manual
V1.0-3531_4CH_SDI
Thank you for purchase our product. Please read this user manual carefully to ensure
Attentions:
◆The DVR should be installed in a well-ventilated place，keep suitable space from
ground ,benefit for machine cooling，Be sure not to block its air vent.，keep away from heat
sources and high temperaturea environment。
◆Please keep the level installation of this product.should be avoid install at violently
shaking place（such as the back of car、motor above、high and rough luggage-rake）.
◆For avoid short circuit cause fire or other damage，when wash the car please
prevent DVR(include camera and other parts) touch water and wet, the machine don’t have
waterproof.
◆The equipment consists of Precision Parts, please do not try to disassemble
or adjust any parts, if need maintenance, please contact the distributer or
Longse’s customer service.
◆Please select the hard disk which commended by the manufacturers,suit
the DVR work requirement, to meet a long time largeamount of data read and write
requests, please purchase from the formal channels to ensure the hard disk quality .
◆This product can’t bear heavy weight, please do not place heavy object
or multi-layer laminated on the product .
Disclaimer:
The Company is do the best to make the contect correct and complete
during the preparation of this manual, if has any errors or omissions without any liability, the
company reserves the right to change any hardware and software mentioned inthis manual at
any time, and without explain beforehand. Thank you for choosing our products, please read
this manual carefully before use. Due to not according to the specified operating losses,
company will not assume any financial liability and legal responsibility.
eLineTechnology.com
that you can use the device correctly and safely.
3
eLineTechnology.com
CONTENT
1. Product Introduction ................................................................................... 4
1.1 Summary .............................................................................................. 4
1.2 Main functions………………………………………………………………… 4
1.3 Front panel buttons description ............................................................. 5
1.4 Rear panel diagram…………………………………………………………. . 6
1.5 Remote control…………………………………………………………………7
2. Basic function operation ............................................................................. 8
2.1 On/off Switching navigation ................................................................... 8
2.2 Login…………………………………………………………………………… 8
2.3 Main menu setup guide ......................................................................... 9
2.4 Configuration management………………………………………………... 10
2.4.1 Basic configuration .......................................................................11
2.4.2 Live configuration ........................................................................ 12
2.4.3 Record configuration ................................................................... 13
2.4.4 Schedule configuration ................................................................ 15
2.4.5Alarm configuration…………………………………………………..... 16
2.4.6 Network configuration .................................................................. 20
2.4.7 User management……………………………………………………...22
2.4.8 P.T.Z configuration ....................................................................... 24
2.4.9 Advance configuration ................................................................. 27
2.5 Data retrieval...................................................................................... 27
2.5.1 Time search ................................................................................ 27
2.5.2 Event search ............................................................................... 28
2.6 Backup............................................................................................... 29
2.7 Check information .............................................................................. 29
2.8 Disk management .............................................................................. 29
2.9 Upgrade ............................................................................................. 30
2.10 Logoff ............................................................................................... 30
2.11 System shut down ............................................................................ 30
4
eLineTechnology.com
1. Product Introduction
1.1 Summary
This device is a digital monitoring and recording product specially designed for the
security field. It adopts standalone processor and standalone Linux operating system.
The device combines with the latest technologies in the IT field, such as video and
audio compression/decompression, large capacity HDD record, TCP/IP network etc.. The
code is embedded in the FLASH chip, which makes the system running more steadily. This
device has both features of digital video and audio recording(DVR) and digital video and
audio server(DVS). It can not only work locally and independently but also compose of a
powerful security monitoring net with networking. With the use of professional network
video surveillance platform (network) software, it can fully reflect its strong networking and
remote monitoring capability.
It can be used for the security protection in the fields of banking, telecommunications,
electronic power, justice, traffic, residential, factory, warehouse, water conservancy facilities
and other areas and departments.
1.2 Main Functions
Real-time Monitoring
It is with analogue video output port, VGA port and HDMI port. It can realize the monitoring
function through the monitor or display. It supports simultaneous TV ，VGA and HDMI
output.
Storage Function
It adopts special format to save data which cannot be tampered with and will be secured
Compression Method
It supports multi-channel audio and video signal. Each channel of audio and video signal is
compressed in real time by independent hardware. The sound and image keep stabilized
synchronization.
Backup Function
It backups through USB port(such as common U disk, mobile hard disk, SATA Combo etc.)
The client computer can download and backup the files on the hard disk via the internet
Video Playback Function
Each channel can realize independent and real-time recording, while retrieval, reverse play,
network monitoring, video search and download etc. can realize simultaneously.Multiple
playback modes: slow forward, fast forward, reverse play and frame-by-frame play.
When playing back the video, the exact time of the event can be displayed.
Network Operation Function
Through the internet, you can realize remote and real-time monitoring, remote video search
and playback, and remote PTZ control.
Communication Port
With RS422 port and PTZ control.
With standard Ethernet port, realizing network remote control function
PTZ Control
5
eLineTechnology.com
Support the PTZ decorder which communicates through RS422.
Can expand multiple decoding protocols, facilitating the realization of PTZ and dome
camera control.
Intelligent Operation
Mouse operation function.For the same settings on the menu, you can copy and paste
quickly.check equipment and accessories..
When you receive the product, please check the accessories are complete or not.
DVR accessories generally include: mouse, power lines and data lines.
1.3 Front panel buttons description
Statement: the front panel interface, button layout and type, real product shall prevail.
The front panel buttons Description:
Buttons on Front Panel
1） STANDBY: Press to power the system standby.
2） IR Sensor: IR receiver for the remote control.
3） LED Indicators: Shows status of alarm, rec, power.
4） Channel/Numbers/Playback: Press buttons 0~9 to view the selected channel in
full-screen; press buttons 0~9 to input passwords and user IDs; during playback, press the
following:
• 6/ : Increase reverse playback speed 1X, 2X, 4X
• 7/ : Press to freeze playback to one frame, then press again to advance
frame-by-frame
• 8/ : Press to start playback
• 9/ : Press to slow playback speed by 1/2, 1/4, 1/8
• 0/ : Press to increase forward playback speed 1X, 2X, 4X
5） MENU/ OK: Press to open/close the main menu.or confirm.
6） Navigation: Press the Navigation buttons to perform the following:
•: In menus, press to confirm selections; in PTZ mode, press to change the navigation
buttons to control the connected PTZ camera (not included)
• : Press to move cursor up; in PTZ mode, press to pan camera up
6
Item
Physical connector
Connector description
1
Power input
DC 12V/5A
2
Power swich
POWER ON/OFF
3
Video output
video output for connecting TV or
monitor (BNC)
4
Video input
For connecting analog video
signal input (BNC)
5
Audio Input
For connecting audio signal input
6
Alarm Input
4 I/O alarm input
Alarm Output
I/O output for alarm
RS 422
RS 422 for connecting PTZ
7
Network
For connecting Ethernet
8
VGA
For connecting VGA monitor
9
Audio Output
For connection audio output
10
HDMI
For connecting HDMI monitor
11
LINE IN
For connecting Intercom equipment
eLineTechnology.com
• : Press to move cursor down; in PTZ mode, press to pan camera down
• : Press to move cursor left; in PTZ mode, press to pan camera left
• : Press to move cursor right; in PTZ mode, press to pan camera right
7） USB: Connect a USB flash drive to the top port for data backup and firmware
upgrades connect a USB mouse to the bottom port.
1.4 Rear panel diagram
Statement: the rear panel interface, button layout and type, real product shall
prevail.，below rear panel picture may be different with the actual panel.
Connectors on Rear Panel：
7
TIP: When using the remote
control to enter password and
camera titles, select the field
using the navigation buttons,
press ENTER, and then press
the number buttons.
For the convenience of readers read and quick queries, the following
sections with a example of 4-channel digital hard disk recorders to introduce the
details, and pictures are base on this model, other model’s operation interface are
the same except channel and frame rate, Corresponding parameter to the same
settings, individual parameters can be directly and so on.
eLineTechnology.com
1.5 Remote control
The remote control is the secondary input device
For navigating the system’s interface.
To use the remote control:
1.STANDBY:Press to turn standby mode ON/OFF.
2. LOGIN/LOCK: If "Security" has been enabled in
the Setup menu, press to open the user password login
screen.
3. Number/Channel buttons: While in menus,
press buttons 0~9 to enter values; during live viewing,
press to view channels in full-screen.
4.QUAD: Press to switch between quad and
split-screen displays.
5. PTZ: Press to open the PTZ control window.
6. Playback controls :
• : Increase reverse playback speed 2X, 4X, 8X.
• : Press to start playback.
• : Press to increase forward playback speed 2X,
4X, 8X.
• : Press to slow playback speed by 1/2, 1/4,
1/8.
• : Press to to advance frame-by-frame.
• ║: Press to freeze playback to one frame.
• ■: Press to stop playback.
7. SERACH: Press to stop playback
8. RECORD:Press to start manual recording,
then press again to stop manual recording.
9. +/ - : In menus, press to adjust values.
10. MENU: Opens the main menu.
11. EXIT: Close menu windows
12. EXTRA: For the future use.
13. Navigation/Enter:
• : Move cursor in menus up;
• : Move cursor in menus right;
• : Move cursor in menus left;
• : Move cursor in menus down;
• Enter: In menus, press to confirm selections;
during playback and preview, press to view system
information
Check whether there is fluorescent light being used in the nearby
8
eLineTechnology.com
2. Basic function operation
2.1 On/off Switching navigation
2.1.1 Start
Before start，Please ensure all parts connected well！
Power on
Equipment start，POWER indicator light is red.
2.1.2 Power off
User can power off the device by using remote controller、keyboard and mouse.
2.1.3 By remote controller:
Press Power button, the Shut down window will appear, click OK, the unit will power
off after a while.
2.1.4 Disconnect the power by keyboard and mouse:
Step1: enter into Menu, then select “System Shut Down” icon, the Shut down window
will appear
Step2: click OK, the unit will power off after a while.
Step3: disconnect the power
2.2 Login
Equipment start ,【POWER】indicator light bright. initial password is blank. After
equipment start press 【MENU】key on panel or press right key on mouse, trun to login
interface as below:
After Input matching user name and password,you can enter system to setup and
operation.
Live preview interface:
Pic2-1 User login
9
Icon
Sign
description
Recording
Manual
record
Motion
detectio
n state
Alarm
state
Timing
recording
state
eLineTechnology.com
Live playback
Click Playbutton to playback the record enter fast record playback: as lelow
picture: User can do concrete operation by click the buttons on screen.
2.3 Main menu setup guide
Menu bar: Click right mouse or press ESC button on the front panel, the control bar
will display on the bottom of the screen, refer to pic2-2
Pic2-2 Menu bar
Click the icon near Screen mode , appear channel choose frame as below
Loading...