How it Works
e-Line Technology
Loading...
Eyeball
Instruction Manual
36 pgs3.64 Mb0

e-Line Technology Eyeball Instruction Manual

Network Camera setup and installation guide. Browser setup with settings explained.
Product Made in China under ISO9001 & ISO1400 standards
Manual Printed in China v1.0
NETWORK CAMERA GUIDE
Install
Browse
Use
01.BSM.12.0092401
Eyeball Vandal Dome IP
Camera
Instruction
Manual
English Version 1.0
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT
OPEN
CAUTION: TO REDUCE T HE RISK OF ELECTRIC SHOCK DO
NOT
REMOVE COVER.NO USER SERVICABLE PART S
INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The
lightning flash with arrowhead symbol, within an equilateral triang le, is intended to alert the user to the presenceof un-insulated "dangerous voltage" within the product’s enclosure that
may be
of sufficient magnitude to
constitute a risk of electric shock.
The
exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature
accompanying
the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT
EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF THE PLUG TO THE WIDE SLO T AND FULLY
INSERT.
Important
Safeguards
In addition to the careful attent ion
devoted
to quality standards in the manufacturing process of
your
video
product, safety is a major factor in the design of
every
instrument.
However,
safety is your responsibility too. This sheet lists impo rtant information that will help to assure your enjoyment and proper use of the
video
product and
accessory
equipment. Please read them
carefully before operating and using your
video
product.
Installation
1.
Read and Follow Instructions-All the safety and
operating instructions should be
r
ead before
the
video
product is operated.Followalloper
ating
ins
tr
uctions.
2.
Retain Instructions-The
safety and operating
instructions should be retained for future
refer
ence.
3.
Heed Warnin gs-Comply with all warnings on the
video
product and inthe operating ins
tru
ctions
.
4.
Polarization-Do not defeat the
safety purpose of the polarized
or grounding-type plug. A polarized plug has two blades with one wider t han the
other. A grounding typepl ug hastwo blades
and
a third ground ing prong. The wideblade or the t hird prong are provided for
yoursafety.
If the providedpl ug doesnot fit into
youroutlet, consult an electrician for replacement of th e obsolete outlet.
5.
PowerSources-This
video
product should be
operatedonly from the type ofpower
sour
ce
indicated on the marking label. If
you
are not sure of
the type of power supply toyour
loca
tion,consult your
video
dealer orlocal
power
company.
For video
products intended to operatefrom batter
y power,
or
other s ources,
refer
to the operating ins
tru
ctions
.
6.
Overloading-Do not overload wall outletsof
extension cordsas this can
result
in the r isk of
fire
or electric shock.
Overloaded AC
outlets, extension
cords,
fray
ed powercords,
damagedorcrackedwire
insul ation, and broken plugs are
dangerous.
They
may
result
in a shockorfire hazard.Periodically
examine the cord,
and if its
appearance
indicat
es
damage or deteriorated insulation,
haveitreplac
ed
by yourservicete
chnician.
7.
Power Cord Protection-Power supply cordsshould
be routed so that theyare not
likelyto be walked on or pinc hedby item s placed upon or against them, paying
particular attention to cords at plugs,
conveniencereceptacles,
and the point where they
exit from the
videoproduct.
8.
Ventilation-Slots and openingsin the caseare
provided
for
ventilation to ensure reliable operat
ion
of the
video
product and to protect itfrom
overheating.
These openings
must not be blocked
or
covered. The
openings should never be blocked by
placing the
video
equipm ent on abed, sofa, rug,
or
other similar surface. T his
video
product should neverbe placed near or over a radiator or heat register.
This video
product should notbeplaced in a
built-in installation such as a
bookcaseorrack
un
l
ess
proper ventilation is provided or the video
product manufacturer’s instructions
have
been
fo
llow
ed.
9.
Attachments-Do not usea ttachments
unl
ess
r
ecommendedbythe
video
product manufacturer as
they may
cause
a h
azard.
10.
Camera ExtensionCa bles–Check
the rating of
your extension
cable(s)
to verify compliance with
your
localauthority regulationsprior to inst
allation
.
11. Water
and Moisture-Do not useth is
videoproduct near water. For example, neara bath tub, wash bowl, kitchen si nk or laundry tub, in aw
e
t
basement, near aswimming pool and the
lik
e.
Caution: Maintain elec trical safety.
Powerline
operated
equipm ent or accessories connected to this uni t should bear the ULlisting mark of C SA certification mark on the
accessory
itself
and shou
ld
not be modified s oas to defeat the safety
fea
tures.
This
will
help
avoid any
potential hazard
from electr ical shoc kor f ire. If in doubt, contact qualified service personnel.
12.
A
ccessories-Do not placethis
video
equipm ent on anunstabl
e cart, stand, tripod, or table. T he video
equipment may fall, causing
serious
damage
to the video
product. Use this
videoproduct
only with a cart, stand,
tripod, bracket, or tablerecommendedbythe manufacturer or sold wit h the
video
product. Any
mounting of the p roduct should
follow the manufacturer’s instructions and use amount ing accessoryreco
mmended by the manufacturer.
Precautions
Service
13.
Servicing-Do not attempt to servicethis video
equipment yourself asopening
orremoving covers
may
expose
you to dangerousvoltage or other
hazards.
Referall servicingt o qualified service
personne
l.
14.
Conditions Requiring Service-Unplug this video
product from the
walloutlet and
refer
servicing to
qual
ifi ed servicepersonnel under thefollowing
cond
itions:
•
When
the power supply cord or plug is damaged.
•
If liquid has
been
spilled or objects
havefallen
int
o
the
videoproduct.
•
If the
video
product has been
exposed torain or
water
.
•
If the
video
product
does
not operate normally by
foll
owingthe oper ating instructions. Adj ust only
those controls that are covered byth e operatin
g
instructions. Improper adjustment of othercontr
ols
may
result
in
damage
and
will
oftenre
quir
e
extensive
work by aqual
ified techniciantorestor
e
the
video
product to its normal operation
.
•
If the
video
product
has beendropped
or theca binet
has been damaged.
•
When
the
video
product exhibits a distinct change
in performance. This i ndicates an eed
for
service.
15.
Replacement
Parts-When
replacemen t partsare
required,
have
the serv icetechnician ver ify that the
replacements used
have
the same safety characteristics as the original parts. Use of replacements specified by the
videoproduct
manufacturer can prevent fire,
elec
tric
shockor
other hazards.
16.
Safety Check-Upon completion of
any
service
or
repairs to this
video
product, ask the service
technici an to perform safety checks
r
eco
mme
nded by the manufacturer to determ ine tha t the video product is in safe operating
co
ndition.
17. Wall or
Ceiling Mounting -The cameras provided
should be mounted to a w
allor ceilingonly
as instructed in this guide,using the p rovided mounting
br
acke
ts.
18. Heat
-
The productshould be situated
awayfrom
heat sources suchas radiators, heat
regis
ter
s,
stoves,
or other products (including amplifiers) that
produce
heat.
Use
19.
Cleaning-Unplug the
video
product from the
wall
outletbeforecleaning.Donot useli
quidcleanersor
aerosolcleaners. Usea damp cloth
forclea
ning.
20.
Product and
Cart
Combination-Video
andca
rt
combinat ion should bemoved withcare.
Quick
stops,
excessive
force, and
uneven
surfaces may
causet he
video
product and cart combinationto
o
verturn.
21.
Object and Liquid Ent ry-Never push objects of any
kind into this
video
product through openingsa s
they mayto uch dangerousvol tagepoints
or
“short-out”
parts that could
result
in a fire
or
elec
tric
shock. Never
spill
liquid of any kind on the
video produc
t.
22.
Lightning
- For
added
protection
for
this video
product during a lightnin g storm, or when it is
left
unattended andunused
forlong
periods of time,
unplug it
from
the wall outlet anddi sconnect the
antenna
orcablesystem. This
willpreventdamage
to the
video
product due tolightning and power line
su
r
ges.
General
Precautions
1. All warnings and instructions in this manual should befollowed.
2.
Remove
the plug from the outlet before cleaning.Donot use liquid aerosol detergents.
Use
a
water
dampened
cloth for cleaning.
3.
Keep
enough
space
around the unit for ventilation. Slots and openingsin the stor
age
cabinet
should not beblocked.
4. During lightning storms, or when the unit is not used for a
l
ong
time, disconne ct the power
supply, antenna, and cables to protect the un it from ele ctrical
sur
ge.
FCC CLASS A
NOTICE
NOTE
This equi pment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. Th ese limits are designed to provide r easonable protectio n against
ha
rmful interf erence wh en the equipmen t is operat ed in a commercial environm ent. This equi pment gener ates, uses, and can radiate radi o frequency energy and, if not installed and used in accordance wit h the manu
facturer’
s
instruction manual, may
cause
harmful i nterference with radio communications.
Operation
of thi sequipmen t
in a residentia
lareais likely to cause harmful interferen ce, in which case you wil l be req uired to correctthe
interf erence at your own expen se.
This
equipment
has been
certified
and
found to comply with the limits regulated
by FCC, EMC,
and
LVD.
Therefore, it is
designatedtoprovide
reasonable protection against interference
and
will not
cause
interference with othe r applianceus age.
However,
it is imperative that the user follows the guidelines in this manual to
avoid
improper
usage which may result in da mage to the unit, electrical shock and fire hazard injury.
In order to improve the feature functions
and
quality of this product, the specifications are
subje
ct
to
change
without notice f rom time to time.
Features
•
HD
CMOS
Progressive Scan
•
720p or 1080p models with
real-time
(25/30
fps)
•
Triple-streaming
(H.264/MJPEG)
•
Future proof
ONVIF 2.1
compliance
(1.02
backwardsco
mpatibl
e)
•
Compatible with popular third party
VMS
softwar
e*
•
Power-over-Ethernet
(PoE)
operation,
14Watt max/12V
operation
•
Backup options: micro SDcard
, FTP, NAS,loca
l
•
Mobile Apps: iPhone®, iPad®, Android™
•
Supports two-way audio
•
Simple insta
llation and adjustment
•
2.8-12mm vari-focalle
ns
•
30 ft. (9m) IR Night
Vision,TrueDay/Night (TDN)
•
IP66
Weatherproof and IK5
Vandal
Resistant
•
Multi-browser support:
IE,
Firefox, Safari, Chrome
•
3-axis gimbal
for versatile mounting
*
Check Onvif c ompliance on for y our software.
TABLE OF
CONTENTS
1.
Getting
Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . 1
1.1 Default Camera Username, Password, and Ports . . . . . . . . . ..1
1.2 Camera Interior Overv iew . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
2
1.2.1
Functions of Status LED’s . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . .. . . . .
2
1.3
ONVIF
Compatibility and Included Software Overview . . . . . . ..3
1.3.2
NVMS . . . . . . . . . . . . . . .. . . . . . . .. . . . . . . . .. . . . . . . . . .. . . . . .. . . . . .. . . . . . . .
3
1.3.3 CD Conten ts
. . . . . . . . . . . . . . . .. . . . . .. . . . . . . . . . . . .. . . . . .. . . . . .. . . . . . . . . . .
3
2.
Connection
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.
Camera
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.
Finding
the
Camera’sIPAddress
. . . . . . . . . . . . . . . . . . 8
4.1 Finding the Camera’s IP Address Using NVMS . . . . . . . . . . . . ..9
4.2 Finding the Camera’s IP Address using
UPnP
in Windows® 7. .
9
4.3 Finding the Camera’s IP Address using Bonjour® in Mac OS®
10
4.4 Finding the CameraIP using the BNC Test Cable . . . . . . . . . . .
.
11
5.
Configuring Remote
Connection
. . . . . . . . . . . . . . . . . . 12
5.1
Connecting
to a
DDNS
address using NVMS . . . . . . . . . . . . . ..15
6.
Web Configuration
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.1 Supported Browsers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..17
6.2 Chrome, Firefox, and Safari Setup . . . . . . . . . . . . . . . . . . . . . .
.
17
6.3 Internet Explorer® Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
18
6.4
Web
Interface/Live
Video Overview
. . . . . . . . . . . . . . . . . . . . . ..21
6.4.1
Live
Video
Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .
21
6.4.2
Configuring Camera Settings . . . . .. . . . . . . . . . . . . . . . . . . . . .. . . . . . . .. . . . . . . . .
22
6.5
Device
Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..23
6.6 Stream Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
24
6.7
Device
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..25
6.7.1
Local Network . . . . . . . . . . . .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . .. . . .
26
6.7.2 Device
Port . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . .. . . . . . . .. . . . . . . . ..
27
6.7.3
Camera . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . .. . . . . . . . . . .. . . . . . . . . . . . .
28
6.7.4
Date & Time . . . . . . .. . . . . . . . . . . . .. . . . . . .. . . . . . . . . . . . . . . . . . . . .. . . . . . . . . .
28
6.7.5
OSD . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . .. . . . . . . . .. . . . . . . . . . .. . . .
30
6.7.6
Microphone . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .
31
6.7.7 BNC Video
Output . . . . .. . . . . . . . . . . . . . . . . . . . . .. . . . . . . .. . . . . . . . .. . . . . . . . ..32
6.7.8
Language . . . . . . . . . .. . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .. . . . . . . . . .. . . . . . . . ..32
6.8 Alarm Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
33
6.8.1
Disk Alarm . . . . . . .. . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..33
6.8.2
Motion Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . .. . . . . . . . ..34
6.9 Local Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
36
6.9.1
Record Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . .. . . . . . . . .. . . . . . . . ..36
6.9.2
Record Policy . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..41
6.10
Privacy Masking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
43
6.11
Network Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
44
6.11.1
DDNS . . . . . . . .. . . . . . . . . .. . . . . . .. . . . . . . . . . . . . . . . . . .. . . . . . . . .. . . . . . . . ..44
6.12 Service
Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
45
6.12.1 SMTP
(Email Alert Setup) . . . . . . . . . . . . . . . . . . . . . .. . . . . . . .. . . . . . .. . . . . . . . ..45
6.13
Privilege Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
46
6.13.1
Group . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . .. . . . . . . . . . . . . . . . ...47
6.13.2
User . . . . . . . . .. . . . . . . .. . . . . . . . . . . . . . . . . . . .. . . . . . . .. . . . . . . . . . . .. . . . . ..48
6.13.3
Unlocking User Accounts . . . . . . . . . . . . . . . . . . .. . . . . . . .. . . . . . . . . . . .. . . . . . ..49
6.14
Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50
6.14.1
Protocol . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . .. . . . . . . . ..50
6.15 Device
Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50
6.16
Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
51
6.17
Sensor Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
51
6.17.1
Image Adjust . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . .. . . . . . . .. . . . . . . . . . . .. . . ..52
6.17.2
Shutter Control . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .. . . . . . . . ..52
6.17.3 Gain
Mode .. . . . . . . . . . .. . . . . . . . . . . . . . . .. . . . . . .. . . . . .. . . . . . . . .. . . . . . . . ..53
6.17.4
Day/Night Mode . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . .. . . . . . .. . . . . . . . ..53
6.17.5
Auto Iris . . . . . .. . . . . . . . . . . . .. . . . . . . . . .. . . . . . .. . . . . . . .. . . . . . . . . . . .. . . ..54
6.17.6
Gamma . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . .. . . ..54
6.17.7 AE
Meter
Mode
. . . .. . . . . . . .. . . . . . . . . .. . . . . . .. . . . . . . .. . . . . . . . . . . . . . . . . ..55
6.17.8 WB
Setting . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . .. . . . . . . .. . . . . . .. . . . . . . . ..55
6.17.9
WDR . . . . . . . . . . . . . . . . . .. . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . ..56
6.17.10
Mirror . . . . . . . . . . . . .. . . . . . . . . . . . . .. . . . . . . . . . . . . . . .. . . . . . . . .. . . . . . . . ..57
6.17.11
Noise Filter . . . .. . . . . . . .. . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . ..57
7.
ResettingtoFactory
Defaults . . . . . . . . . . . . . . . . . . . 58
8.
Dimensions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
9.
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
1 2
1.
GETTING
STARTED
The
system comes with the following
components:
•
1 x Camera
•
1 x Mounting Screw
Kit
•
1 x Allen Key
•
1 x
RJ45
Coupler
•
1 x
BNC
Test Cable
•
1 x Mounting Template
•
1 x Quick Start Guide
•
1 x Instruction Manual
•
1 x Software/Documentation CD
Mounting Screw
Kit:
•4x
mounting screws
(PA4
30mm)
•
4 x drywall anchors
Allen Key
RJ45
Coupler
BNC Test
Cable
1.1
Default Camera Username, Password, and
Ports
Username: admin
Password: admin
Ports: 80
(HTTP),
30001
(Control/Streaming), 8080
(RTMP),
554 (RTSP)
IP Address:
DHCP Enabled by Default
(Router will automatically assign IP
address)
NOTE:
Once
you
have
completed the basic setup of the camera, it is
recommendedto
configureastaticIPaddress. This
willprev
ent theca
mer
a
IP addresschanging in the
event
of a power failure. For details,
see
“6.7.1
Local Network” on page 26.
1.2
Camera
Interior Overview
Access panel. With Micro sd Card slot*. Status LED, camera reset & service
video
*microSD card slot (max. 64GB supported; SanDisk™/Kingston™ brand
memory cards
1.2.1 Functions of Status
LED’s
•
POWER (Top):
Glows
green when camera is
connected
to power.
•
NET (Middle):
Flashes red to indicate network activity. recommended)
CdS Light sensor
Lens Zoom & focus adjust
3 4
1.3
ONVIF Compatibility and Included Software
Overview
This camera is
ONVIF v2.1
compliant. It is designed for interoperability
with
popular
VMS’s and NVR’s*,
with backwards compatibility to
ONVIF v.1.02.
For
more information on
ONVIF,
visit www
.onvif
.or
g
NOTE:
Provided software is
PC
compatible only; Mac
OS® access
to the
cameras is available via Safari® browser only.
1.3.1
NVMS
•
NVMS
is a
client-only solution
that
supports up
to 36IP
cameras.
NVMS
is a free software provided on the CD.
•
NVMS
supports all the features of the camera. It
can access
microSD/
SD
card recordings and camera setup over a local network.
•
NVMS
manual is provided on the
CD.
1.3.2 CD Tools
•
CD contents Folders
IP Search ; Search find IP Cameras and set IP address and gateway NTP Service Tool ; Time Sync Application: IP devices match one PC system time. FTPUpdater ; Firmware Update tool IP Support Help Files ; Website support help documents for common problems. RTSP Tool ; provides RTSP string command f. e.g VLC or Quick-time use SD Driver ; Ext2 driver for Windows XP to read sd Memory card on PC Onvif_Help ; documents on Onvif specifications Open the NTP service ; Windows XP only enables NTP time to be enabled. Adobe Flash Player ; Flash Video player for Windows IE plugin and Apple Mac OS Adobe AcrobatReader ; Windows and Max OS Acrobat Reader v10
Files: IP_series_bitrate_calculator.htm ; Simple storage calculator for IP devices NVMS_Install.exe ; NVR Software installation for PC NVMS_Manual_1.7.pdf ; Guide to use the NVMS Software SNMedia_Player.exe ; File Player for recorded files / backup files from devices / NVMS.
2. CONNECTION
The
camera has the following termination cables:
1.
RJ45
Network
Interface:
Connect
to a
router
or switch on your network
using
RJ45
Ethernet cable
(Cat5e
or better).
100Mhz
connection. PoE
supported (class 3
PoE
switchre
quir
ed).
NOTE:
Use
the included
RJ45
coupler to connect to male end of RJ45
Ethernet cable.
RJ45
Coupl
er
2.
Audio Input (RCA):
Connect
to a self-powered microphone
for listen-in
audio.
3.
Audio Output (RCA):
Connect
to an amplifier or self-powered speakerfo
r
intercom/2-way audio.
4.
DC12V (1A):
12V DC
power input terminal. Make sure tofollow corr
ect
polarity (+/-) marked on the power connector when connecting to power.
•
Minimum Power Requirement:
450mA/5.4W.
5 6
Connection
3.
CAMERA
INSTALLATION
Make
sure to follow the correct polarity if connecting
the camera to
DC
power. Polarity is marked on the
power connector.
1.
Use
the included allen
keyto
remove
make lose the top 1
camera will simple be removed away
from the
base part.
2.
Use
the included mounting
template or the camera base
2
plate to mark holes
for
the four
mounting
screws.
Mounting Screw Hole
Mounting Screw Hole
3. Mount the camera to the
surface using the included mounting screws (4x).
3
4.
Now refit camera into base
Adjust position as needed
5.
(Optional)
Insert a microSD card into the camera. To enable recording, you mus
t
format
the microSD card and configure microSD recording. For details, see “6.9.1 Record Directory” on page
36.
sdCard access is behind panel on camera
NOTE:
The
camera supports microSD cards up to a maximum size of 64GB. SanDisk™orKingston™
brand microSD cards are recommended.
7 8
6. If you need to adjust the
viewing angle,
loosen
the
6
screws on the sides of the ball camera and adjust the ball camera.
.
Tighten the
cover
when finished.
7. Adjust camera zoom focus
Use service video cable
7
for BNC output. Adjust the focus zoom With small flat blade
Finding the Address
4.
FINDING THE CAMERA’S
IP ADDRESS
Use
the steps below to find the camera’s IP address and connect to the
camera over the local area network
(LAN)
using
NVMS, UPnP
on
Windows® 7, or Bonjour® in Mac OS®.
4.1
Finding
the
Camera’sIPAddress Using
NVMS
1. Install
NVMS
from the
CD. Now
Doubl
e-click
the
NVMS
icon
(
) on the
Desktop.
Thelogin screen
appears.
2. Under User Name and
Password,enter the default
NVMS
user name
(
admin)and password(admin).Click Login.
Enter Admin Enter Admin
Click Login
3.
NVMS
opens and scans the localnetwork
for
connectedca
mer
as.
Detected camera IP addresses on the LAN appear in the
Device
List on
the
left
side of the screen with a icon.
Found
camera
IP address
9 10
Finding the Address
4. Click on a camera IP address in
Device
List tolo
gin.
5. Under
User Name,enter the user name
for
the camera (default: admin).
Under
Password,enter the password
for
the camera (default: admin).
Click Continue.
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Continue to login
6.
The
camera appears under the camera IP address. Click and drag the
camera to the display grid to open
it.
Click and drag the camera to the display grid to open
it
NOTE:
For detailed instructions on using
NVMS,
see the NVMS
manual on the CD.
4.2
Finding
the
Camera’sIPAddress using UPnP
in
Windows®
7
NOTE:
To use
this method, your
router
must support
UPnP and
theca
mer
a
and
computer mustbeon
the
same
network.
UPnP
is enabledin
theca
mer
a
by
default,
and canbeenabled/disabledusing
NVMS (check
the NVMS
manual
for details).
Finding the Address
1. Click
Start>Computer>Network.The
camera’s IP address appears
under Network
Infrastructur
e.
Double-click to open the camera
Network
2. Double-click the camera to open it in your default browser.
3. Under User Name and
Password,enter the camera’s User Name
(default:
admin)and Password (default:
admin)and click
Login
.
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login
4.3
Finding
the
Camera’sIPAddress using
Bonjour®in
Mac
OS®
NOTE:
To use
this method, the camera
and
computer must
be on
the same
network. Bonjour® is enabledby default, and can be enabled/disabl
ed
using
NVMS
(check the
NVMS
manual
for details).
1.
Open
Safari® browser and click the Bookmarks button ( ).
11 12
Finding the Address
2. Click
Bonjour
. The
camera’s IP address appears in the Bonjour Devices
list.
3. Double-click the camera to open it in
Saf
ari®.
Bookmarks button
Bonjour
Double-click the camera’s IP address
4. Under User Name and
Password,enter the camera’s User
Name
(default:
admin)and Password (default:
admin)and click
Login
.
Enter Camera User Name (default: admin) Enter Camera Password (default: admin)
Click Login
4.4
Finding
the
CameraIPusing
the
BNC Test
Cable
When
the
BNC
test
cableisconnected
to the camera, the
IP address
is shown
on the test monitor.
The
camera must
be connected
to power to use the BNC
test cable.
NOTE:
The
default IP address of
192.168.0.120
is shown if the ca
mer
a
cannot obtain an IP address from the
router.
Check
the Ethernet/power
connections and
routerco
nfigur
ation.
Configuring Connection
5. CONFIGURING REMOTE
CONNECTION
Follow the steps below to configure your camera for connections over the Internet using a web browser,
NVMS,
or other
VMS
software.
Step
1 of6:
Locate
the
camera’s local
IP address:
•
See
“4. Finding the Camera’s IP Address” on
page 8
.
Step
2 of6: Port
Forward your
router:
You
need to enable port forwarding for the following ports on your router to
the camera’s local IP address:
•
HTTP
Port (default: 80)
•
Control Port (default: 30001)
NOTE:
If you are configuring multiple IP cameras
for
individualre
mot
e
access, you
must
change
the ports
for
each
camera.
Two
cameras cannot
use the same port number
.
NOTE:
Port forwarding the
RTSP
and
RTMP
ports is not
necessary
unless
your installation has specialre
quir
ements.
There are two methods for port forwarding:
•
You
can
manually port forward your router.
See yourrouter’s user manual
for details. An example of a port forwarding screen is shown below.
HTTP
80 80
100
Control
30001
30001
100
Loading...
+ 25 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use