How it Works
eLine Technology
Loading...
EPTZ-27IR
User Manual
28 pgs370.67 Kb0

eLine Technology EPTZ-27IR User Manual

IR PTZ Dome Camera
Read this Manual carefully before installation and keep it for future reference.
Notice:
Precautions:
1.Non-techinician is forbidden to operate this dome device before
reading this manual thoroughly.
2.Cut the power supply off before operating the dome device to avoid
damage caused by improper operation.
3.Interior of the Dome device are precision optical and electrical device.
Heavy pressure, shock and other incorrect operations should be
prevented. Otherwise, may cause damage on product.
4.Please do not remove and disassemble any internal parts of Dome
video camera by self in order to avoid normal usage being impacted.
There is no part inside the device, which can be repaired by users
themselves.
5.All the wiring of the dome device should be conducted strictly
according to the wiring instruction. When necessary, thunder-proof,
surge-proof and other protecting measures should be carried out.
6.Please do not use the product under the situations of exceeding
specified temperature, humidity or power supply specifications.
1
Content
Chapter 1 Product Overview ...................................................................................... 4
1.1 Performance Instructions............................................................................ 4
1.2 Feature Functions Instruction..................................................................... 4
Chapter 2 Menu setting............................................................................................... 7
2.1 Operation instructions ................................................................................ 7
2.2 Main menu ................................................................................................. 7
2.3 Dome information ...................................................................................... 8
2.4 Display Options.......................................................................................... 8
2.4.1 Camera Name Setup............................................................................ 9
2.5 Control Options.......................................................................................... 9
2.5.1 Dome Addr Setup................................................................................ 9
2.5.2 Control Option Operation.................................................................. 10
2.6 Camera Options........................................................................................ 10
2.6.1 Zoom and Focus................................................................................ 10
2.6.2 Camera Exposure ...............................................................................11
2.6.3 Others ................................................................................................ 13
2.7 Function Programming............................................................................. 14
2.7.1 Preset................................................................................................. 14
2.7.2 Program VectorScan.......................................................................... 16
2.7.3 Pattern ............................................................................................... 17
2.7.4 Sector Setup ...................................................................................... 19
2.7.5 Mask Zone......................................................................................... 20
2.7.6 Mask Color........................................................................................ 20
2.7.7 Motion............................................................................................... 21
2.8 System setup............................................................................................. 22
2.8.1 Clear Memory ................................................................................... 23
2.8.2 Restore Def Setting ........................................................................... 23
2.8.3 Color System..................................................................................... 23
2.8.4 Dome Reset ....................................................................................... 23
2.8.5 IR Module Setup ............................................................................... 23
2
Chapter 3 Short-cut Operations and Specification of Dome Device ............... 24
Chapter 4 Trouble Shooting of Dome Device ..................................................... 27
3
Chapter 1 Product Overview
1.1 Performance Instructions
¾ Address of Dome device is from 0～255. The number (address) of dome device in
the control system is setup by the hardware (8-digit on and off switch) of dome
device.
¾ Integrated multi-protocol and auto protocol differentiation. Note: The dome device
only auto differentiate controller of the first communication.
¾ Pan 360 degree continuous scanning.
¾ Tilt 90 degree action plus 2 degree angle adjustment. Plus the 2 degree
adjustment, the view angle can be 90 or 92 degree.
¾ Pan manual operation speed can be 0.1 to 150 degree per second.
¾ Tilt manual operation speed can be 0.1 to 55 degree per second.
¾ 128 preset positions.(A fixed position that aimed by the dome camera, which can
be set and revised by user arbitrarily)
¾ The maximum running speed when preset position is being called can reach 240
degree per second with accuracy of ±0.1 degree.
¾ Compatible with many kinds of Module Camera.(Sony, Hitachi, Sanyo, Yoke, CNB,
LG, Haitron, Samsung, Dahua)
¾ Power supply: AC 24V/3A.
¾ Easy installation interface.
¾ Pass environmental protection grade IP66 (outdoor type).
¾ Adopts long distance RS-485 transmission mode.
Transmission speed, i.e. Baud rate is selectable. (2400bps/4800bps/9600bps
/19200bps).
1.2 Feature Functions Instruction
¾ English operation menu and function display.
¾ Camera name and operation position and angle display.(The name of the camera
can be edited and the coordinate angle of the dome device can be displayed on the
4
screen.)
¾ Operation crosshair function.(Enable this option, the target can be captured more
effectively with crosshair on the screen.)
¾ Three PTZ tours operation with 8 minutes record of each tour.(Can real-time
monitor and record the action of manual operation)
¾ Six group of programmable vector scans.(including scan speed, dwell time, preshot
and interruption between tours)
¾ Auto flip function with 10 degree move up.
¾ 24 sectors of programmable sectional mask.(Can mask part of the sectors of
camera, which differs depending on different types of camera)
¾ 8 sectors of programmable sectional display.(Can display the name and nature of
concrete position shooting by the camera)
¾ Auto enter function running after self-test of the dome device and auto enter
function running when there is no transmission.(Dwell time can be set from 5 to 999
seconds)
¾ Freeze video picture function.(frozen picture function)
¾ Operation return function.(after executing operation return, the dome device will
return to the previous operation)
¾ Intelligent manual scan function.(execute this function in manual pan operation, you
can adjust the manual pan operation)
¾ Intelligent power off real time memory.(If power is cut off when a certain function is
in operation, the dome device can resume working at where the power is cut off.)
¾ High efficient 3-dimension scan.
¾ Camera zoom in speed limit function.(When it is zooming in, the speed
of the dome device will auto slow down.)
¾ Remote setting of dome address.
¾ The world's most advanced high-power infrared lamp technology:
a. Infrared light power conversion efficiency, heat small, long life, low power, less
5
than 5 watts, Subversion of the traditional infrared lighting quick decline fatal
shortcoming
b. Use its power can be considered as a single point of light source characteristics,
developed a variable angle infrared light With the perspective of the size of the
change in one machine simultaneously follow the changes to ensure the infrared
light is neither wasted nor flashlight effect, to maximize the use of infrared light,
the subversion of the traditional large volume of long-range needs of the practice
of tens of watts
6
Chapter 2 Menu setting
2.1 Operation instructions
Menu operation instruction
To make a selection, move the joystick in the Up or Down direction. The on-screen
arrow points to the selected option. Using the joystick to the Left or Right position you
can change the value of your selection or enter the submenu for the selected option.
Press the button CLOSE on the keyboard controller to exit the menu or return to the
previous menu(one layer up)
Number setup.
¾ Joystick Left or Right when programming to select preset.
¾ Press OPEN to confirm, open and display the number selection cursor
¾ Joystick Left or Right to select the number to be entered
¾ Press OPEN to confirm selection. The selected number is displayed on the
corresponding data bit.
¾ Number of respective data bits are input as above.
¾ Press CLOSE to exit or return to the previous menu level when programming is
done.
2.2 Main menu
95+SHOT+ACK to enter the main menu of the dome as illustrated down.
1 LANGUAGE ENGLISH
2 DOME INFORMATION
3 DISPLAY OPTIONS
4 CONTROL OPTIONS
5 CAMERA OPTIONS
6 FUNCTION PROGRAMMING
7 SYSTEM SETUP
TITLE
7
TITLE
The title may be different with different type
of dome.
1. Language Setup
Language: English.
2. Dome Information
Joystick down to move the cursor to press
OPEN or joystick left or right to move the
joystick to enter the menu.
3. Display Options
Display dome info or function.
4. Control Options
Set the pan or tilt and camera of the dome manually or auto compatible with the entire
control system. User individualized operation setting.
5.Camera Options
Set camera function.
6. Function Programming
Program and execute PTZ and VectorScan etc.
7. SYSTEM SETUP
System setup, Including, restore default setup clear memory, color system,
dome reset.
2.3 Dome information
Joystick down to move the cursor to press OPEN or joystick left or right to move the
joystick to enter the menu.
CAMERA : xxxx
PROTOCOL : xxxx
BAUDRATE : xxxx
DOME ID : xxx
VERSION : xxx
IRIS CLOSE TO EXIT
TITLE
TITLE
The title may be different with different type
of dome.
Display camera type\ protocol\
baundrate\dome ID\ software version
2.4 Display Options
Set the display of dome info or function.
DISPLAY OPTIONS
1 CAMERA NAME SETUP
2 COORDINATES ON
3 START_UP SCR MSG ON
4 CROSSHAIRS ON
Operation steps
[1].Joystick up/down to move the cursor to
select Display Options
[2].Joystick left/right to enter Display Option
[3].Joystick up/down to select either one of the
sub-menu
[4].Joystick left/right to select ON/OFF
8
Loading...
+ 19 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use