MINI SPOT LED
SPECIFICATIONS:
Model: Mini Spot LED
Supply Voltage: 120V/60Hz
LED: 1 x 3W White LED
Power Consumption: 5W
Beam Angle: 9 Degrees (Standard)
12 Degrees (Included)
Weight: 0.92 lbs./ 0.42 kgs.
Size: 3.81” L x 3.5” W x 5.3” H
Working Position: Any Safe position
Duty Cycle: None
Warranty: 1 Year
CAUTION! Please read and understand these instructions before installing or
operating this unit.
Introduction and Operation: The unit is ready to be hung or set on flat surface. This fixture is designed to
operate as a stand alone unit. It has been tested at the factory and there is no assembly necessary. The Mini
Spot LED is a small LED pin spot. Plug this xture in and it will light right up.The unit comes equipped with 9
degree lens, with a 12 degree lens included. To change the lens, remove the fixture ring that holds the current
lens in place, then remove the lens and replace with the other lens. Place the fixture ring back into its place to
hold the new lens in place.
1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our
1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with
dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover
items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty
is only valid with-in the United States.
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
Loading...