Eliminator Lighting Micro Strobe User Manual

SPECIFICATIONS:

Micro
Strobe

CAUTION! Please read and
understand these instructions
before installing or operating
this unit.

Operating Instructions:

Unit is ready to be hung or set on flat surface. It has been tested at the factory there is no assembly
necessary. The Micro Strobe is light weight compact mini strobe light. The flash rate can be adjusted
by turing the flash rate knob on the rear of the unit.

Caution! Never open unit when in use. Always disconnect main power before servicing.

1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our

1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with
dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover
items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty
is only valid with-in the United States.

Model: Micro Strobe
Weight: .44 lbs./ 0.20kgs
Size: 5.75” x 3.5” x 2”
Lamp: 20W Bright White Lamp
Power Consumption: 20W
Beam Angle: 130° Degrees
Fuse: None
Supply Voltage: 120V
Working Position: Any Safe position
Duty Cycle: Built-In Duty Cycle
Colors: White
Warranty: 1 Year

©Eliminator® Los Angeles, CA. - wwwEliminatorLighting.com