Eliminator Lighting LED Spot User Manual

LED Spot

SPECIFICATIONS:

Model: LED Spot
Supply Voltage: 100V ~ 240V/50~60Hz
LED: 1 x 5W White LED
Power Consumption: 5W
Beam Angle: 5 Degrees
Weight: 1 lbs./ 0.30 kgs.
Size: 4” L x 4.5” W x 2.75” H
Working Position: Any Safe position
Duty Cycle: None
Warranty: 1 Year

CAUTION! Please read and understand these instructions before installing or

operating this unit.

Introduction and Operation: The unit is ready to be hung or set on flat surface. This fixture is designed to
operate as a stand alone unit. It has been tested at the factory and there is no assembly necessary. The LED
Spot is a small LED pin spot. Plug this xture in and it will light right up.

1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our

1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with
dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover
items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty
is only valid with-in the United States.

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com