Eliminator Lighting LED Array User Manual

LED Array

SPECIFICATIONS:

Model: LED Array
Supply Voltage: 100 - 240V 50Hz/60Hz
LED: 2 x 9W 3-in1 RGB LEDs
Weight: 5 lbs./2.3kgs
Size: 11.75”L x 8.75”W x 6”H
Fuse: 1 Amp
Power Consumption: 30W
Working Position: Any Safe position
Duty Cycle: None
Colors: Multiple Colored Lenses
Warranty: 1 Year

CAUTION! Please read and understand these

instructions before installing or operating this
unit.

Operating Instructions:

The LED Array is a powerful effect for clubs and dj’s. The LED Array creates a dramatic cluster of
multi-dichroic colored beams. This unit features an external microphone that allows the beams to
be triggered by sound. The LED Array’s beams bounce up and down to the beat of the music. The
LED Array is ready to be hung or set on the ground in a safe position. When mounting this unit to
truss be sure to use a clamp. Plug the unit in to a standard wall outlet. After plugging the unit in, the
fixture will react to the beat of the music via the sound active external microphone. The unit has a
sensitivity knob on the rear of the unit that makes more or less sensitive to sound. Turning the knob
in clockwise direction will make the unit more sensitive to sound. The unit requires sound to activate
the movement.

Caution! Never open unit when in use.
Always disconnect main power before
replacing the fuse. Remember to always
replace with the exact same type of fuse.

1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our

1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with
dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover
items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty
is only valid with-in the United States.

©Eliminator® Los Angeles, CA. - wwwEliminatorLighting.com