Eliminator Lighting Aqua LED User Manual
AQUA LED
SPECIFICATIONS:
Model: Aqua LED
Supply Voltage: 120V/60Hz
LED: 1 x 10W LED
Power Consumption: 12W
Fuse: 1Amp
Weight: 6 lbs./ 2.7 kgs.
Size: 8” L x 9” W x 9” H
Beam Angle:
Working Position: Any Safe position
Duty Cycle: None
Warranty: 1 Year
CAUTION! Please read and understand
these instructions before installing or operating this unit.
Introduction and Operation: The unit is ready to be hung or set on flat surface. This fixture is
designed to operate as a stand alone unit. It has been tested at the factory and there is no assembly necessary. The Aqua LED is a rippling water eect. Plug this xture in and it will light right up.
On the rear of the unit there is a toggle switch that is used to control the internal color wheel. When
toggle switch is one position the color wheel will automatically and continuously scroll through the
color wheel. When the color wheel toggle switch is in the opposite position the color wheel will lock
in place. You can create a more dramatic effect by using split color combinations by stopping the
wheel anywhere between two adjacent colors.
Fuse Replacement: Locate and remove the unit’s power cord. Once the cord has been removed
located the fuse holder located inside the power socket. Insert a flat-head screw driver into the power
socket and gently pry out the fuse holder. Remove the bad fuse and replace with a new one. The fuse
holder has a built-in socket for a spare fuse be sure not to confuse the spare fuse with active fuse.
Caution! Never open unit when in use.
Always disconnect main power before
replacing the fuse. Remember to always
replace with the exact same type of fuse.
1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our
1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with
dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover
items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty
is only valid with-in the United States.
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
Loading...