ELGO Electronic LMIX2 Series Operating Manual
Operating Manual
SERIE LMIX2
Magnetic Incremental Length Measuring System with 0.1mm Resolution
(Translation of the original operating manual)
Direct, contactless measurement
Repeat accuracy +/- 0.025mm
Measuring length theoretically unlimited
Insensitive against dirt
799 000 069 / Rev. 1 / 2013-03-27
-2-
Publisher ELGO Electronic GmbH & Co. KG
Carl-Benz-Str. 1
D-78239 Rielasingen-Worblingen
Technical Support
+49 (0) 7731 9339 – 0
+49 (0) 7731 2 13 11
info@elgo.de
Document- No. 799 000 069
Document - Name LMIX2-000-E
_
13-13
Document- Revision Rev. 1
Issue Date 2013-03-27
Copyright © 2013, ELGO Electronic GmbH & Co. KG
Contents
1 Contents
1 Contents ................................................................................................. 3
2 General ................................................................................................... 5
2.1 Information Operating Manual ................................................................................ 5
2.2 Explanation of Symbols ........................................................................................... 5
2.3 Statement of Warranties .......................................................................................... 6
2.4 Demounting and Disposal ....................................................................................... 6
3 Safety ...................................................................................................... 7
3.1 General Causes of Risk ........................................................................................... 7
3.2 Personal Protective Equipment .................................................................................. 7
3.3 Conventional Use ................................................................................................... 7
4 Transport and Storage ............................................................................. 9
4.1 Safety Instructions for Transport, Unpacking and Loading ............................................ 9
4.2 Handling of Packaging Material ............................................................................... 9
4.3 Inspection of Transport ............................................................................................ 9
4.4 Storage ................................................................................................................. 9
5 Product Features .................................................................................... 10
6 Technical Data ....................................................................................... 11
6.1 Identification ........................................................................................................ 11
6.2 Dimensions Sensor ............................................................................................... 11
6.3 Technical Data Sensor .......................................................................................... 12
6.4 Technical Data Magnetic Tape ............................................................................... 13
7 Type Designation ................................................................................... 14
8 Installation and First Start-Up ................................................................ 15
8.1 Operating Area .................................................................................................... 15
8.1 Mounting of the Magnetic Tape ............................................................................. 16
8.2 Mounting of the Sensor ......................................................................................... 18
9 Design and Functions ............................................................................ 20
9.1 Pin Assignment ..................................................................................................... 20
10 Accessories ............................................................................................ 21
11 Disturbances ......................................................................................... 22
11.1 Fault Clearance.................................................................................................... 22
11.2 Re-start after Fault Clearance ................................................................................. 23
12 Maintenance ......................................................................................... 24
13 Cleaning ............................................................................................... 24
-3-
Contents
14 Index ..................................................................................................... 27
-4-
General
2 General
2.1 Information Operating Manual
This manual contains important information regarding the handling of the device.
For your own safety and operational safety, please observe all safety warnings and instructions.
Precondition for safe operation is the compliance with the specified safety and handling instructions.
Moreover, the existing local accident prevention regulations and the general safety rules at the site of operation
have to be observed.
Please read the operating manual carefully before starting to work with the device!
It is part of the product and should be kept close to the device and accessible for the staff at any time. The illustrations in the manual are for better demonstration of the facts. They are not necessarily to scale and can slightly
differ from the actual design.
2.2 Explanation of Symbols
Special notes in this manual are characterized by symbols.
The notes are introduced by signal words which express the magnitude of danger.
Please follow this advice and act carefully in order to avoid accidents and damage and injuries.
Warning notes:
DANGER!
This symbol in connection with the signal word “Danger” indicates an
immediate danger for the life and health of persons.
Failure to heed these instructions can result in serious damage to
health and even fatal injury.
WARNING!
This symbol in connection with the word „Warning” means a possibly
impending danger for the life and health of persons.
Failure to heed these instructions can result in serious damage to
health and even fatal injury.
CAUTION!
This symbol in connection with the signal word “Caution” indicates a
possibly dangerous situation. Failure to heed these instructions can
lead to minor injuries or damage of property.
Special safety instructions:
DANGER!
This symbol in connection with the signal word “Danger” indicates an
immediate danger for the life and health of persons due to voltage.
Failure to heed these instructions can result in serious damage to
health and even fatal injury. The operations may only be carried out by
a professional electrician.
Tips and recommendations:
NOTE!
… points out useful tips and recommendations as well as information
for an efficient and trouble-free operation.
-5-
General
References:
() 1.2) Marks a reference to chapter 1.2 of this manual.
( DOC 3.4) Marks a reference to chapter 3.4 of the document DOC.
2.3 Statement of Warranties
The statement of warranties is enclosed separately in the sales documents.
Guarantee
The producer guarantees the functional capability of the process engineering and the selected parameters. The
period of warranty is one year and begins with the date of delivery.
2.4 Demounting and Disposal
Unless acceptance and disposal of returned goods are agreed upon, demount the device considering the safety
instructions of this manual and dispose it with respect to the environment.
Before demounting:
Disconnect the power supply and secure against re-start. Then disconnect the supply lines physically and discharge remaining energy. Remove operational supplies and other material.
Disposal:
Recycle the decomposed elements:
Metal components in scrap metal
Electronic components in electronic scrap
Recycle plastic components
Dispose the remaining components according to their material consistence
CAUTION!
Wrong disposal causes environmental damages!
Electronic scrap, electronic components, lubricants and other auxiliary
materials are subject to special refuse and can only be disposed by
authorized specialists!
Local authorities and waste management facilities provide information about environmentally sound disposal.
-6-
Safety
3 Safety
CAUTION!
Please read the operating manual carefully, before using the device!
Observe the installation instructions!
Only start up the device if you have understood the operating manual.
The operating company is obliged to take appropriate safety measure.
The initial operation may only be performed by qualified and trained
staff.
3.1 General Causes of Risk
This chapter gives an overview of all important safety aspects to guarantee an optimal protection of employees
and a safe and trouble-free operation.
Non-observance of the instructions mentioned in this operating manual can result in hazardous situations.
3.2 Personal Protective Equipment
Employees have to wear protective clothing during the installation of the device to minimize danger of health.
Therefore:
Change into protective clothing before performing the works and wear them throughout the process.
Additionally observe the labels regarding protective clothing in the operating area.
Protective clothing:
PROTECTIVE CLOTHING
… is close-fitting working clothing with light tear strength, tight sleeves
and without distant parts. It serves preliminarily for protection against
being gripped by flexible machine parts.
Do not wear rings, necklaces or other jewellery.
PROTECTIVE GLOVES
… for protecting the hands against abrasion, wear and other injury of
the skin.
PROTECTIVE HELMET
… for protection against injuries of the head.
3.3 Conventional Use
The ELGO-device is only conceived for the conventional use described in this manual.
The LMIX2 - ELGO- length measuring system only serves to measure lengths.
-7-
Safety
CAUTION!
Danger through non conventional use!
Non-intended use and non-observance of this operating manual can
lead to dangerous situations.
Therefore:
Only use the device as described
Strictly follow the instructions of this manual
Avoid in particular:
Remodelling, refitting or changing of the construction or single
components with the intention to alter the functionality or scope
of the device.
Claims resulting from damages due to non-conventional use are not possible.
Only the operator is liable for damages caused by non-conventional use.
-8-
Transport and Storage
4 Transport and Storage
4.1 Safety Instructions for Transport, Unpacking and Loading
CAUTION!
Transport the package (box, palette etc.) professionally.
Do not throw, hit or fold it.
4.2 Handling of Packaging Material
Notes for proper disposal: ) 2.4
4.3 Inspection of Transport
Check the delivery immediately after the receipt for completeness and transport damage.
In case of externally recognizable transport damages:
Do not accept the delivery or only accept under reserve.
Note the extent of damages on the transportation documents or delivery note.
File complaint immediately.
NOTE!
Claim any damage immediately after recognizing it. The claims for
damage must be filed in the lawful reclaim periods.
4.4 Storage
Store the device only under the following conditions:
Do not store outside
Keep dry and dust-free
Do not expose to aggressive media
Protect from direct sun light
Avoid mechanical shocks
Storage temperature () 6 Technical Data) needs to be observed
Relative humidity () 6 Technical Data) must not be exceeded
Inspect packages regularly if stored for an extensive period of time (>3 months)
-9-
Loading...