Elgen Manufacturing HD Damper Sleeve User Manual

HD Damper Sleeve

Product Data Sheet

Features

Meets SMACNA requirements - 2005 3rd Edition
Section 4.8 Figure 4-6
Made from one piece of metal
Welded Seam for added strength and low leakage
Bead & Crimp on one side
Union Made Yellow Label

Optional Construction

All Volume Dampers for air control

Remote Cable Operated Controls (internal mounted or
external mounted)

Description

Elgen’s “Heavy Duty” Damper Sleeve is
designed to go between two pieces of spiral
pipe, where a damper is needed to regulate

the air ow. It is for Low & Medium Pressure

applications.

Standard Construction

Formed from one piece of 24 GA ASTM A-653
G60 material.

Elgen Super Stando

Damper blade
3/8” aluminum square rod
Super snap-in bushing

A (in) C (in) D (in)

4 9.25 4.625
5 9.25 4.625
6 9.25 4.625
7 9.25 4.625
8 9.25 4.625

9 9.25 4.625
10 9.25 4.625
12 9.25 4.625
14 9.25 4.625
16 9.25 4.625

20 GA to 30 GA Galvanized
Bead & Crimp on both sides

G90 Galvanized
Stainless Steel 304
Stainless Steel 316
Aluminum
PCD
Galvanneal (Paint Grip)
Agion (Antimicrobial Coating)

Packaging

Size (in) Tray Qty Skid Qty

4 MTO MTO N/A
5 MTO MTO N/A
6 9 300 600
7 MTO MTO N/A
8 9 200 525

9 MTO MTO N/A
10 9 120 420
12 9 90 360
14 9 90 410

Weight per

Skid (lbs)

Guarantee

All Elgen products are guaranteed by Elgen
Manufacturing against defective material.

Elgen Manufacturing

10 Railroad Ave, Closter NJ 07624
Tel: [phone] :: Fax: [phone]
[e-mail] :: www.elgenmfg.com

ALL STATED SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE OR OBLIGATION