ElfinX FSK-6000 Owner's Manual

FSK-6000

Two Way Car Security System







OWNER’S MANUAL

CONTENTS:

OPERATING INSTRUCTIONS

DESCRIPTION OF FUNCTIONS AND FEATURES

WIRE CONNECTION GUIDE

INSTALLATION GUIDE

Information to the user

http://www.elfinx.com

1

This operation manual details the use of the device contained in the package.
It is recommended to look for an experienced technician for device installation.

Warning

Changes or modifications not expressly approved by the manufacturer will void the warranty and the
user’s authority to operate the device.

This device complies with Radio Frequency Rules in respective countries.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired
operations.

Quick Reference Guide

Button Function

Arming

Disarming

Panic

+

+

 Press this button to lock the doors and enter arming mode.
 During the arming mode, press this button to check the status of the vehicle.
 During the arming mode, press this button to locate the vehicle with lights flashing.
 Press this button to unlock the doors and enter disarming mode.
 When the alarm is triggered, press this button to turn off the chirping sound from the

remote control and the siren sound from the vehicle. The vehicle is then disarmed.

 Press this button to activate emergency panic alarm.
 Press this button again to turn off the panic alarm.
 Press this button for car finding with siren on and lights flashing
 Open trunk

Silent Alarm mode ON/OFF

Turn remote’s light ON/OFF

Stop remote’s siren: when remote is siren, press any button to stop the siren.
Press either or to stop buzzer inside the car.

http://www.elfinx.com

2

System Installation Guide

Main Unit Installation

The main unit is placed under the vehicle control panel. After fixing the main unit in a suitable place, start
connecting all the wiring according to the Wire Connection Diagram. Before putting back all the OEM parts,
simply test the system functions first. The main unit must be fixing tight

Shock Sensor Installation

Install the shock sensor after fixing the main unit. It is recommended to place the shock sensor near the doors for
easy detection of any intrusions. To adjust the sensitivity of the shock sensor, simply use a screw to turn the knob
on the shock sensor, turning right to set a higher sensitivity or vice verse. Then test the sensitivity by triggering the
shock sensor.

NOTE: Please do not hit the shock sensor directly.

Antenna Position

The ideal position for the antenna is in the top corner of the front windscreen right up of the wheel side. Please
keep the antenna free from any obstructions to prevent reception interference.
NOTE: If the vehicle is parked in urban area with many buildings around, or under a strong electric field
environment, the reception will be affected.

http://www.elfinx.com

3