Elexa Consumer SMM-08 Users Manual

User manual

1． Functional schematic diagram （TWO MOTORS）

1. Description of Power

Host is equipped with Switching power supply（DC12V、1.25A）.This machine is
the maximum current not more than 1.2A when the rated load weight.When current
more than 1.2A : Buzzer will alarm in the host, and one second later ,SCM detect
the fault and then disconnect motor power automatically to protect the Host.

2. Instructions

1) Turn on the power, the TV Mount will turn back to midpoint automatically,then

contraction, return and turn off.

2) Press the button “OPEN” on the remote, the TV Mount will extend a n d s to p.

3) Press the button “LEFT,RIGHT,DOWN” to adjust the angle that you want.

4) Hold the button “MEMORY” long time and adjust the angle you want, then press

the button “MEMORY” again, the red light turn off and this angle is saved.

5) Press the button “OPEN” again, the TV Mount will turn back to midpoint

automatically, then contraction, return and turn off; if you want to turn
on again, press the button “MEMORY” only, then the TV Mount will restore
the angle that you saved before turn off.

FCC ID: VII-SMM-08

IMPORTANT REGULATORY INFORMATION

This device complies with Part 15 of the FCC Rules:

Operation is subject to the following two conditions:

1. This device may not cause harmful interference and

2. This device must accept any interference that is received, including any
interference that may cause undesired operation.

WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipments.