eletab MANUAL STANDING DESK Instruction Manual

Low P rofile A djustment
Insert t he c rank into t he c orresponding holes supported b y both left a nd right
Remove the c rank and insert into t he holes a s s hown for s torage.
2. There a re adjustable foot p ads under each foot. If the floor isn't even , s imply
3.
turn the p ad to a djust the height t o make the d esk s table.
4.Tip: Use a b ubble level to c heck if t he d esktop is even.
Manual height adjustable desk frame
1
2
E
Instruction Manual
11
4
Bubble L evel
MANUAL STANDING DESK
www.facebook.com/EleTabus EleTab_service@outlook.com
Preface
This manual height adjustable standing desk consists of a heavy-duty steel desk frame, a desktop and a manual height adjustment system. Please read and completely understand this manual before installation in order to make sure the safe and correct use of the system and maintain the longevity of the overall construction.
Instructions of Safety and Warnings:
• Any failure to comply with the safety and installation instructions in this manual may cause serious bodily injury.
Any incomplete observation of the instructions, warnings and additional information marked with the "Note"
and " " may result in serious damage to the system or its components.
• This product can be used by children aged from 8 years and above if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Persons with reduced physical, mental abilities and or lack of experience and knowledge must not use the product,
unless they're under supervision, understand the hazards involved or they have been thoroughly instructed in the use of the apparatus by a person who is responsible for the safety of these persons.
• Users should make sure that they never sit on the desktop in order to prevent serious bodily injury.
Other Safety Instructions:
CAUTION
• Clear up all obstacles within the height adjustment range.
• Don't leave the cords or plug unorganized in order to prevent tripping hazards.
• Any attempts to reconstruct the desk frame aren't allowed.
• Don't add anything to the adjustable junctions of the desk frame.
• Outdoor use is prohibited.
1 2
Preparation Checklist and Installation
What are the specifications
1
you need to know?
What are the tools you
2
require while installation?
What's the thing you'd
3
better have before installation?
Things you need to know
4
before installation
Weight Capacity
40kg (88lbs)
Bubble Level Allen Wrench
Please check all of the components shown in the component checklist. If any of the components are missing or damaged, contact your point of purchase for a replacement.
Disposal: The product with this mark indicates that this product shouldn't be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the local recycle service or contact your point of purchase to withdrawn the product.
Operation Temperature
(-5 ~+ )°C 40°C
(Included)
A Shipping Blanket to protect the desk and the floor
Phillips Screwdriver
A (x1)
Desk Board
C (x2)
Lifting Column
This page can be torn so that it's easier for you to match the components with the images.
D (x1)
Crossbar
B (x1)
Sync Rod
E (x1)
Crank
3 4
Loading...
+ 4 hidden pages