elero Antriebstechnik 2833009X User Manual
UniTec-868, UniTec-915
Nr. 28 330 0006, Nr. 28 330 0906
Operating instructions (translation)
EN
Please take care of the operating instructions!
181006706_EN_0715
Contents
Contents
Warning advice
Device explanation ......................................................................3
Safety instructions ......................................................................4
Safety instructions/Exclusion of liability .................................4
Scope of supply/General information .......................................6
Intended use ................................................................................6
Safety instructions for radio operation .....................................7
Mounting of the wall bracket ......................................................8
Explanation of functions ............................................................9
Bidirectional radio system ......................................................9
Unidirectional radio system ....................................................9
Initial operation .......................................................................9
Note .....................................................................................10
Status display of the indicator lamp .....................................10
Group control .......................................................................12
Selection button Auto/Manual .............................................. 12
End position/intermediate position ........................................13
Ventilation/tilting ...................................................................13
Programming a transmitter/channel ......................................14
Programming additional transmitters/channels ....................15
Group mode .........................................................................16
Intermediate positions for roller shutters/awnings/
venetian blinds ..........................................................................17
Programming the intermediate position ................................17
Programming the ventilation/tilting position ..........................17
Approaching the intermediate position .................................18
Approaching the ventilation position/tilting ............................18
Deleting the intermediate position ........................................19
Deleting the ventilation slots/tilting ........................................19
Approaching the end positions ............................................20
Deleting a transmitter/channel .................................................21
Deleting all transmitters .......................................................21
Technical data ............................................................................21
Replacing the battery ................................................................22
Cleaning .....................................................................................22
Disposal......................................................................................22
Notes on repair/repair address ................................................23
Notes on troubleshooting .........................................................24
Manufacturer’s declaration ......................................................25
2 | EN
EN | 3
Device explanation
Safety instructions / Exclusion of liability
Warning advice
Manual/
automatic
sliding switch
Alarm signal
control light
Cover
Buttons under the cover flap
UniTec-868
STOP!
prerequisite for disturbance-free operation and
UP button
Safety instructions:
Observance of the operating instructions is the
entitlement for claims related to defects.
STOP button
• Therefore, first read the operating instructions
before you use the device!
• Ensure that the operating instructions are available
to the user in legible form.
DOWN button
• The operator must ensure that the basic safety
measures are observed and fulfilled.
• The operator must have completely read and
understood the operating instructions.
P
Programming
buttons P
(all-purpose)
Exclusion of liability:
It is essential to observe these operating instructions, if the
UniTec-868 /UniTec-915 is to be used safely and if the various product characteristics and performance features are to be
achieved.
elero GmbH assumes no liability for personal injuries, property
damages and financial losses that arise from non-observance of
the operating instructions.
Liability for material defects is excluded in such cases.
4 | EN
EN | 5
General safety instructions
Scope of supply / General information /
Warning advice
Intended use
Failure to observe them can lead to bodily injuries!
General
• Never install or use damaged products.
• Only use unmodified original elero electrical parts.
• If the device is opened without permission or used in
• The device contains small parts which can be swal
Installation
• All installation work must be carried out by an
• This electrician must be suitably qualified.
• Observe any country-specific conditions when
• The device may only be used by persons who have
Operation
• Only use in dry rooms (please observe the stated
• If one or more transmitters are used for controlling the
CAUTION!
Observe the following safety instructions!
an improper manner, or if it is incorrectly installed or
operated, there is a risk of damage to persons and
property.
-
lowed.
electrician.
installing the device.
read and understood the operating instructions.
protection class).
system, its operating range must stay visible during
operation.
• Replace the battery only with batteries of the identical
type (CR 2032).
• Keep children away from the control units.
Scope of supply
UniTec-868 / UniTec-915 operating unit
(batteries included in the device)
Wall bracket
2 wall plugs (Ø 6 mm)
2 screws (4 x 35)
Operating instructions
General information
You can control one or more receivers with the UniTec-868 /
UniTec-915 transmitter.
The UniTec-868 / UniTec-915 can be operated manually at any
time.
This device is characterised by simple operation and large control
buttons.
Intended use
The UniTec-868 / UniTec-915 is a single-channel transmitter. It can
be used unidirectionally (compatible with the existing ProLine program) or bidirectionally. The handheld transmitter must only be used
for controlling roller shutters, venetian blinds and sun protection systems which are fitted with elero radio receivers. Other uses or use
going beyond this is considered to be contrary to the intended use.
elero GmbH shall not be liable for damages in case of:
• Other use than described above
• Changes to the device
• Improper use
Please see the technical data contained in these operating
instructions.
Third-party devices should only be connected after consultation with
your specialised dealer.
EN | 76 | EN
Instructions for radio operation
Mounting of the wall bracket
Warning advice
Safety instructions for radio operation
Only use radio systems, if they are allowed and can
• Please note that radio systems must not be oper
• The remote control is permitted only for devices and
• The operator has no protection whatsoever against
• The range of the radio signal is limited by the govern
CAUTION!
Observe the following safety instructions for radio
operation!
be operated without interference.
ated in areas with an increased risk of interference
g. hospitals, airports, ...).
(e.
equipment for which a malfunction of the transmitter
or receiver does not give rise to a hazard to persons,
animals or objects or where this safety risk is covered
by other safety equipment.
interference by other telecommunication installations
and local terminals (e.
which are operated properly in the same frequency
range).
ment and the built environment.
g. also from radio installations
-
-
Mounting of the wall bracket
Before installation in the required assembly position,
The bracket has to be fixed so that the drill hole does
1. Attach the bracket to the wall, with the two wall plugs and
screws which are provided.
NOTE!
check that the transmitter and receiver are functioning properly.
not touch any electrical lines.
2. Slide the
bracket.
UniTec-868 / UniTec-915 from the top onto the wall
EN | 98 | EN
Loading...